We manufacture DC motor drives that provide for an effective interface for a controller with its motor. Our DC drives are robust, rugged & reliable and can be adjusted for speed. It is available in 1/4 to 2 HP ratings and operates from single phase 115 or 230 volts AC. Our DC drives are also available in 3 to 5 HP ratings and operate from single phase 230V AC. Each drive solution provides linear performance and EMI noise immunity.

AC and DC general purpose drives are ideal application solutions in a wide range of industries and for an array of requirements. For high performance motion requirements, CMC servo drives may provide a better solution. CMC general purpose and servo drive solutions are available with new machinery, in systems and for retrofit.

We fabricate control panels that are highly accurate and used in wide variety of industrial applications. Our control panels are available in two categories: fully draw out motor control center and non draw out motor control center.

Technical Specifications

Fully draw out motor control center control panels:

• Rated insulation voltage: 660V 50 HZ
• Rated operated voltage: 415V 50HZ
• Rated current: Main horizontal busbar 400A to 3000A, vertical riser 600A
• Short circuit strength: 50 KA RMS for 1sec with 1 sec with a peak current of 105KA
• Ambient temp: Design Ambient temp standard 40°C Operated 45°C & 50°C
• Degree of protection: Standard - IP 52, IP 54 as IS 13947
• Single front & double front version of MCC are available

Double front fully draw out MCC supplied to BSES and Andhra project Ltd. for water treatment plants.

Non draw out motor control center control panels are:

• Rated insulation voltage 660V 50HZ
• Rated operated voltage 415V 50 HZ
• Rated current: Main Horizontal busbar 400A to 3000A, vertical riser depending load
• Short circuit strength: 50KA RMS for 1sec.with 1 sec with a peak current of 105KA
• Ambient temp: Design Ambient temp standard 4000°C Operated 4500°C & 5000°C
• Degree of protection: Standard - IP 52, IP 54 as IS 13947

Single front non draw out MCC supplied to Smithkline Beecham Ltd. for water treatment plants.

We manufacture temperature controllers that have high degree of accuracy in controlling temperature. The controller is fitted with temperature sensors as an input. Our temperature controllers are available in all 4 DIN sizes and supply excellent temperature control with a minimum of set-up effort.

Features:

• Auto-Tuning
• Dual Setpoints
• Alarm Masking
• Ramped Outputs insure the user gets all the control performance required and none of the complexity

The temperature controllers have two outputs as standard, this product is easy to connect to AC or DC output devices. We also make available these controller with relay and logic outputs and take minimum amount of time to install and set-up.

Our temperature controls have more advanced features including loop break alarms to warn if the process is failing to respond as planned. Bright, four digit, LED displays and alarm indicators help to make these instruments the best choice for retrofit or OEM applications

Special features of temperature controllers:

• 48mm by 48mm Smarter Logic for superior control
• Automatic tuning of PID parameters
• Splash & chemical resistant sealed mylar front panel
• External lockout, PID heating and PID cooling (1/8 & 1/4 DIN models)
• All control parameters front panel adjustable
• Auto/manual operation, F or C display, 3 year warranty
• Selectable input, optional alarm or on/off delay timer

We fabricate microprocessor based control systems that watch and regulate various high-end and precision-based industrial processes. Our microprocessor based control systems are rated to IP65 and all exposed parts are chemically resistant.

The scalability and flexibility of the system means that it can be used for a wide range of applications including:

• Control of chemical concentrations in metal cleaning, phosphating & treatment plants.
• Software for control of accelerator in Zinc Phosphating processes.
• Completing the liquid flow in water treatment plants.
• Monitoring and analyzing waste water contamination and flow for environmental reports.
• Monitoring levels in bulk storage vessels.

Our control panels have a big touch-sensitive color display giving process information in a graphical representation. We can customize the display according to clients' specifications. The usual models display process values, set points, pump status, operating modes and alarm conditions.

The operator can access screens to make adjustments and gain further information about a section of the process at the touch of a button. Trend graphs show 120-hour historical trends of measured process conditions. Chemical usage can be calculated by pump run time or flow measurement.

We manufacture power savers which are highly effective on accomplishing efficiency in power consumption. Our power savers have a host of admirable attributes and features. These are:

• Saving up to 30% of current lighting power costs can be expected.
• Extending lamp life, giving lower maintenance costs.
• The environment, each 10KVA Power Saver can result in savings of up to 32 tonnes of greenhouse gas emissions per year. Having your electricity savings pay for you company's energy efficiency management strategies.
• Light quality, No discernible loss of light quality.
• Failsafe automatically detects unit failure and reverts to full power mode.
• Compact modular design.
• Easy installation-minimum disruption.
• Portable - ideal for rented / leased premises.
• Digital microprocessor technology.
• Minimum flickering when switch to and from energy save mode.

Salient Features:

• Single button operation with LED mode indicator
• Continuous: 24h turn-off timer
• Slow Flashing: long timers
• Fast flashing : short timers
• Dim: off
• Choose short or long-running timers (one-time jumper setting)
• 10A suppressed relay output
• Easy to add to existing equipment

Applications:

• Automatically turn off heating, cooling, lighting, entertainment systems, fans, pumps, sprinklers, etc.

Specifications

• Available timers: 1h / 2h / 4h / 8h / 24h
• Relay output: 10A / 240VAC max
• Power supply: 100 – 240VAC
• Dimensions: 65x50x26 mm

We manufacture T heating controls that find wide applications in heat control processes. Our T heating controls have accomplished thermostats built with in the system. The design and fabrication is done in such a way that increases the accuracy and infallibility of our T heating controls. All components are manufactured in house from superior grade raw materials.