EMS Networks Private Limited

We also offer Cat 5E and Cat 6E cables that are widely used in LAN connectivity within a networked premises. Our Cat.5e Cable is offered in following specifications:

• Structure: 0.511mm solid bare copper(24AWG,Copper),PE insulation,4 pairs FR/PVC OR LSOH jacket


• Frequency: 155/MHz


• Transmission speed: 200/Mbps


• Application: 100 Base-T, 100 Base-TX, ATM, Ethernet, token ring, TP-PMD audio, telephone and multimedia networks

Technical Specifications of Cat.6e Cable:

• Structure: 0.511mm soled bare copper(24AWG Copper),PE insulation,4 pairs aluminum foil shielded, FR/PVC or LSOH jacket


• Frequency: 400/MHz


• Transmission speed:200/Mbps


• FTP Cat6e cable with 600/Mbps transmission speed

Packing:

• Packing lengths: 100M/roll, 200M/roll, 305M/roll, 100 yards/roll, 200yards/roll, 300yards/roll and other length available according to clients' requests


• Inner packing: wooden reel, plastic reel and paper reel available


• Outer packing: carton box or according to clients' requests

Cat-6 is a cable standard for Gigabit Ethernet and other network protocols. We offer Cat-6 cables of international quality standards. Our cables are provided with following specifications:

• Rated temperature: 70°C


• Bare solid or stranded copper conductor, copper wire diameter: 0.4mm


• (AWG26) or 0.5mm (24AWG)


• Wire insulation: color-coded PE insulation


• OD: 0.9mm


• Twisted insulation twister


• FTP: With Mylar and CCS ground wire and al foil


• PVC or LSOH jack


• Standard: ANSI/EIA/TIA-568A, UL444, IEC11801. 61156, IEC 60332-1

Available in 305m/box (1,000')

KVM switch is a hardware device that allows user to control multiple computer systems from a single keyboard, display unit (monitor) and mouse. It is used in LAN and WAN networking setups where more than one server systems are monitored simultaneously. We offer following KVM switches and switch extender to our clients:

• Multi 4, 8 & 16-port KVM Switch for PC(PS/2, USB), Sun (USB, Sun 8-pin)


• KVM Switch Extender

The network racks provided by us are made of high-grade 6063-T5 extruded aluminum. Our relay rack offer superior strength and quality for LAN and TELCO equipment. Some salient features of our network racks are:

• Holds up to 800 lbs. of equipment; servers, UPS's, patch panels, routers, switches, monitors and keyboards, etc.


• 19" rack-mountable space with standard EIA 310-D specifications for mounting rail


• Hole spacing at 5/8", 5/8", 1/2"


• 6"w channel, superb for bulky cable


• Bolt down base standard


• Caster base available if notified when order placed (see shopping cart)


• Available in heights of 70", 77" 84" and widths of 19", 23" and 24", channel depths 6" and 8" (6" shown on-line, call to order 8")


• 40 pack 10-32 nut clips and screws included


• Shelves are not included in price. To order as shown with optional cable trough and shelves see below


• Textured powder coat finish

We provide a wide range of server racks as per the requirements of our clients. The height and dimension of comprising cabinets are of main consideration while selecting server racks. One Rack Unit of our server rack equals 1.75" in mounting rail height.

External Height: For getting a server rack of correct height is extremely important in terms of both current and future internal rack space requirements. We have to take care for enough room for ceiling clearance and any cabling or site requirements as well.
 
Rack Units: Apart from some legacy equipment, monitors, and keyboards, the server and network equipment are intended to be rack mounted. 42U Server Racks are the most common rack height sold for data centers. The actual internal and external heights vary as per the manufacturing specifications. We also offer customised server racks depending on application, requirements and space limitations.