Energy Economics

Min flood lights luminaire suitable
for 150W Tungsten Halogen double ended lamp.

Specification:

Housing:

• Pressure die-cast aluminium ally
  LM24 in IP55 protection.
  

Cover:

• Tempered protective toughened
  glass, 5mm thick, thermal shock and impact resistant.
  

Finish:

• Epoxy Black powder coated after
  phosphochromate treatment.
  

Optics:

• Symmetrical reflector is made of
  high purity pre-anodised dimpled aluminium sheet.
  

Lamp Holder:

• In ceramics with silver plated
  contacts.
  

Mounting:

• Surface mounting using built in MS
  powder coate4d bracket
  

Applications:

• Bill boards
  


• Shop boards
  


• House functions
  


• Garden & Parks
  

Technical Details:

Ordering Code	Lamp Type	Nominal Voltage(V)	Mains Current (A)	Lamp Socket	Power Factor
LHFH05115099	1x150W T.H.	240	0.625	Rx7s	1.0

Supplied with 150W liner halogen
lamp

Exclusige premium
range recess mounting mirror optic luminaire suitable for 14W/28W T5
compact linear fluorescent lamps for modular/Armstrong ceiling

Specification:

Pre-coated, zinc
coated, corrosion resistant long life, weldless sheet steel.

Finish:

• Pre-coated
  white
  

Optics:

Reflector made up
of high purity pre-anodised aluminium sheet, lridescence free, MRO
imoprted aluminium reflector with back folded double parabolic cross
louvre assembly & in-fill panel for wide batwing distribution &
good glare control.

Reflector fixed to
the housing with two spring loaded toggles and hinged by twin wire
straps for re-lamping/easy maintenance.

Lamp Holders:

• Push fit type
  white polycarbonate/ABS with electrical grade brass contacts.
  

Electric gear:

Pre-wired with HF
high performance electronic ballast (THD<33%) as a standard.

Option of high
frequency digital ballast (THD<10%) available on request

Mounting:

• Knock-Out
  provision for suspension through Ø
  19mm condiuit for traditional mounting.
  

Applications:

• Airport
  lounges
  


• Corporate
  offices
  


• BPOs
  & call centers
  


• Modem
  work spaces
  


• Banks
  & commercial offices
  


• Software
  development centers
  

Technical Details:

Ordering Code	Optics	Lamp Type	Nominal Voltage (V)	Mains Current (A)	Lamp Socket	Power Factor
LHCTD7314331 LHCTD7414340 LHCTD7228333	L2 Cat. L2 Cat. L2 Cat.	3x14W T5 HE 4x14W T5 HE 2x28W T5 HE	240 240 240	0.29 0.29 0.28	G5 G5 G5	>0.95 >0.95 >0.95

Option
to use 24W/ 54W T5 HO luorescent lamp available on request
With
HF digital balast option power factor >0.98

General
purpose strip type fixture suitable for single T8/T12 linear
fluorescent lamp for domestic/indoor application only

Specification:

Housing:

• Made
  up of CRCA sheet steel with decorative ABS lamp holding end plates.
  

Finish:

• Epoxy
  powder coated white after phosphochromate treatment for rust free
  long life
  

Lamp
holders:

• Push
  fit type white polycarbonate/ABS with electrical grade brass
  contacts.
  

Electric
gear:

Pre-wired
with 230V rated domestic low loss open construction copper wound
ferromagnetic ballast and universal starter (FSU) upto terminal
block, fro ready to use.

Not
recommende for industrial 240V application

Mounting:

• Fixed
  on wall/celling with help of screws.
  

Application:

• Staircases
  


• Residences
  


• Small
  officer
  


• Society
  parking areas
  

Technical Details:

Ordering Code	Lamp Type	Nominal Voltage (V)	Mains Current (A)	Lamp Socket	Power Factor
LHDF02104009	1X36/40W FLT	230	0.410	G13	>0.05

A compact vertical
narrow beam ceiling downlights, outdoor downlights suitable for incandescent lamp upto 60W ir
retrofit CFLs 20W (TU) or 20W (Spiral)

Specification:

Housing:

• MS powder
  coated white housing with reflector holding reveted frame
  

Optics:

Spun aluminium,
specular finish reflector with square pattern on top, diamond pattern
for middle and vertical facets on lower portion for better glare
control

Lamp holder:

B22-d ceramic lamp
holder with electrical grade copper contacts provided as standard
wired up to terminal block mounted on top.

Mounting:

Fixed into false
ceilling by means of 2 nos. SS spring clips provided as per
instruction

Applications:

• Showrooms
  


• Restaurants
  


• Hotel Lobbies
  


• Corridors &
  passage areas
  

Technical Details:

Ordering Code	Lamp Type	Nominal Voltage <V)	Mains Current (A)	Lamp Socket	Power Factor
LHOL53160399	upto1X60WGLS/	240	0-260	B22-d	1.00
	1X11WCFL ReiropU}/	240	0.090	B22-d	£0.50
	1x20WCFL RolroCTU)/	240	0.155	B22-d	20.50
	1x20WCFL Retro (Spra!)	240	0.165	B22-d	>0.50

We provide our customers with premium quality Electronic Ballast which gives solution for over voltage problems and also facilitates with auto trip protection and spike protection.

Its specifications are as given below:

• Up to 40% Energy Saving


• Wide voltage range 90-300 V AC.


• No EMI/RFI.
  . Up to 50% increases tube life


• Auto trip protection


• Low current crust factor.


• Safety shut down at faulty lamp
  condition


• Higher power factor-0.98.Less than 10%
  total Harmonic distortion (T.H.D)


• Conformation to IS Std 13021 Part I & II


• Over voltage protection.


• Spike protection

Technical Specifications:

Model	Lamp Detail	Operating Voltage	AMP	Watt W	P.F.
Digital	1*36/40 W	90-300 V	145	33	0.99
Ultra	1*36/40 W	90-300 V	145	33	0.98
Plus	2*36/40 W	90-300 V	260	56	0.98
Ultra H.D.	1*36/40 W	90-300 V	145	33	0.98

We offer our customers with high performance oriented Energy Saving High-Bay, which are light weight and easy to handle.

Some of its technical features are:

• Up to 60% Energy saving


• Higher power factor - 0.98


• Operating voltage 90-300 V AC


• Free From Dust and Insect


• Light weight


• Daylight performance


• Low temperature hence useful for AC
  Plants


• Lights instantly


• No tripping, Hence won't get off


• Single piece Aluminum body


• Easy install and maintenance

Technical Details:

Model	Lamp Detail	Operating Voltage	AMP mA	P.F.	Watt W
UHB-4	4*36 W PL-L	90-300 V	555	0.98	120 W
UHB-5	5*36 W PL-L	90-300 V	675	0.98	150 W

We provide our customers with Energy Saving Street Light/Energy Saving Light which are highly efficient as it saves up to 60% energy. Along with it, it lights instantly and is easily installed and has minimum maintenance cost.
Its features are given as under:

• Confirmation to IS 10322 Specifications


• Confirmation to IP-65 Protection


• Higher power factor - 0.98.


• Operating Voltage 90-300 V AC


• Free from Rain, Dust and Insects


• Daylight performance


• Lights weight


• No tripping, hence won’t get off


• Single piece Aluminum body


• Easy install and maintenance

Technical Details:

Model	Lamp Detail	Number of Ballast	AMP mA	Watt W	P.F.	Compare with HPSV/MV*
USL-3	3*36 W	3	390	97	0.98	250 W
USL IP-3	3*36 W	3	390	97	0.98	250 W
USL IP-4	4*36 W	4	555	120	0.98	250 W

General purpose industrial batten suitable for 36W (TA) or 40W (T12) single and twin linear florescent lamps.

Specification:

Housing

• Housing & cover made up to CRCA sheet steel.

Finish:

• Epozy powder coated with after phosphochromate treatment.

Lamp Holders:

• Push fit type white polycarbonate/ABS with electrical grade brass contacts

Electric Gear:

Pre-wired with open construction copper wound ferromagnetic ballast,
universal starter (FSU) and power factor improvement capacitor upto terminal block.

Optin with high frequency digital balast (THD<10%) available on request.

Mounting:

• On ceiling/wall with screws or suspend by 2 nos . @ 19mm condiut or chain.

Applications:

• Lobbies


• Schools


• Godowns


• Indistrial bays


• Railway platforms

Ordering Code	Lamp Type	Nominal Voltage (V)	Mains Current (A)	Lamp Socket	Power Factor	Capacitor Value
LHF11104009-LPF LHF11104025 LHF71104011 LHF71104026 LHF71204011 LHF71204026	1x36/40WFLT 1x36/40WFTL 1x36/40W FLT 1x3640W FTK 2x36/40W FKT 2x36/40W FKT	240 240 240 240 240 240	0.41 0.20 0.21 0.20 0.42 0.40	G13 G13 G13 G13 G13 G13	>0.50 >0.90 >0.85 >0.90 >0.85 >0.90	- - 4 mfd - 8 mfd -

Decorative unique landscape luminaire suitable for single ended elliptical or tubular high pressure sodium vapour/metal halide lamp upto 400W.

Specification:

Spigot
Die-cast aluminium construction for mounting electrical accessories.

Cover:

UV stabilized polycarbonated prismatic cover for glare free light disppersion.

Finish:

Matt black finish spigot after phosphochromate treatment. Gold finish decorative non-corrodible titanium holding ring to secure top & bottom housing tougether.

Optics:

Moulded stepped prismswithin lamp housing helps to achieve "Meso optic" light distribution controling glare.

Lamp holder:

E40 ceramic lamp holder with electrical gade copper contacts.

Electric Gear:

Per-=wide power factor improvement capacitor and super imposed ignitor for reliable ignition upto terminal block, copper wound ferromagnetic ballast supplied separatly be wired as per instruction.

Mounting:

Optimised for lamp post/post/pole mounting of dia 80 mm (Min) 85 mm (Max) with help of screws.

Recommended mounting height 3.5 -4.0 mtr on decorative garden pole .

Applications:

• City avenues


• Shopping malls


• Public gardems & parks


• major roads & junctions


• Public circulating areas

Technical Details:

Ordering Code	Lamp Type	Nominal Voltage (V)	Mains Current (A)	Lamp Socket	Power Factor	Capacitor Value
LHLY10115D36 LHLY10125D36LHLY10140C36	1x15W SON-T 1x250W SON/MH 1x400W SON/MH	240 240 240	0.82 1.32 2.20	E40 E40 E40	>0.85 >0.85 >0.85	20 mfd 33 mfd 42 mfd

Meso optic create direct distribution on the appropriate cut-off to prevent high angle glare (in effect creating a vertual louvre) these also disperse light to create wide, uniform light distribution. Optimised for eliptical or tubular shape HID high wattage lamps

Single piece deep drawn aluminum road lighting/road wayluminaire with side reflectors suitable for high pressure sodium vapour or mercury vapor elliptical coated lamp.

Specification:

Housing:

• Housing
  made up of single piece deep drawn aluminium sheet.

Cover:

• Thermoformed
  melhacrylate, UV stabilised acrylic lense.

Finish:

• Hammertone
  finish out side & white inside after phosphochromate treatment.

Optics:

• Side
  reflectors made up of high purity pre-anodised aluminium sheet.

Lamp
holder:

• In
  ceramics & electrical grade copper contacts.

Electric
gear:

Pre-wired
with power factor improvement capacitor and impulse ignitor fa
reliable ignition upio terminal block, copper wound ferromagnetic
ballast supplied separately be wired as per instruction.

Mounting:

• Suitable
  for a pole with arm OD of 50mm dia (max.) with the help of 2 bolts.

Applications:

• City
  by-lanes
  


• Internal
  roads
  


• Housing
  socities
  


• B2
  classification roads
  

Technical
Details:

Ordering	Lamp Type	Nominal	Mains	Lamp	Power	Capacrtor
Code		Voltage (V)	Current (A)	Socket	Factor	Value
Orton Nova 70W SV
LHRS11170A36	Ix/OWSON-E	240	0.4	E27	>0.85	lOrrfd
LHRG11112036	1x125W UPMV	240	0.69	E27	>0.85	lOmfo
Orion Nova150WSV
LHRS1T115A36	1x150WSON-E	240	82	E40	>085	20 mfd
Onon Nova 250W SV
LHRS14128A36	lx25DWSON-E	240	1.32	E40	>0.85	33 mfd
LHRG14125036	1x25CWHPMV	240	7.3	E40	>0.85	20mfd