Capacity: 25 Tons to 400 Tons

Salient Features:

• It consists of duly stress relieved Steel Plate fabricated frames.
• It is equipped with Cross Shaft Presses.
• The machine is fitted with Pneumatic Friction Clutch and Brake.
• It also has a Hydraulic Overload Protection Device.
• Its has Flooded Lubrication in Gearbox.
• Presses with over 63 ton capacity are fitted with a Motorized Die adjustment.
• The main slide of the press is supported by extra long guides.
• The main slide consists of bronze linings on six face rectangular supports.
• Presses with capacities exceeding 40 tons are fitted with a Pneumatic Counter Balancing System.
• The Press is fitted with imported PLC circuitry.
• Our series of Cross shaft presses come with various optional features such as Die cushions, automatic feeding devices, Photo electric guards and other automation equipment.

Capacity: 80 Tons to 250 Tons

Salient Features:

• The machine consists of duly stress relieved steel plate fabricated frames.
• It is equipped with Cross Shaft Presses.
• Our 'J' series is fitted with Wet type Multi-plate Friction Clutch and Brake.
• The 'J' series also has an adjustable Stroke length.
• Our 'JH' series is equipped with Dry type Friction Clutch and Brake.
• The 'JH' series also has a Fixed stroke length.
• Our double point open back presses are also fitted with an Hydraulic Overload Protection Device.
• It is also fitted with a Motorized Die adjustment.
• The PLC Circuitry that we use is imported.
• This machine comes with various optional features such as Die cushions, Automatic feeding devices, Photo electric guards and other automation equipment.

Capacity: 160 Tons to 500 Tons

Salient Features:

• It comes with duly stressed relieved Steel Plate fabricated frames with four Pillars.
• Our 'JMDI' series is of Link motion type and is fitted with imported Dry type Friction Clutch and Brake.
• The 'JM' series comes with an optional Wet type clutch.
• The press has a Hydraulic Overload Protection Device.
• Its side block is steel fabricated and has a raising up style balancing cylinder.
• Its electrical die adjustment has a digital display.
• Eight sided long guides support the main slide in all four corners.
• It is fitted with imported parts like PLC Circuitry, duplex electromagnetic valves from Japan, and electromagnetic Camshaft.
• The machine is equipped with an intelligent top dead center stop function.
• It also comes with the option of an imported transducer for variable stroke speeds.
• There are various optional features available with this press.

Capacity: 110 Tons to 500 Tons

Salient Features:

• It comes with duly stress released Steel Plate fabricated frames with four Pillars.
• The machine comes with a composite wet pneumatic clutch and an option of imported Dry type Friction Clutch.
• It has a Hydraulic Overload Protection Device and steel fabricated slide block.
• It is also fitted with a raising – up style balancing cylinder and an electrical die adjustment with digital display.
• The main slide is supported by eight sided long guides in all four corners.
• A few of our components are imported like PLC Circuitry, duplex electromagnetic valves (Japan) and Camshaft and transducer for variable stroke speeds, which is optional.
• The double point press is fitted with an intelligent top dead center function and is available in different features.
• Our 'JM36' series is equipped with multiple connecting rod structure.

Capacity: 80 Tons to 400 Tons

Salient Features:

• It comes with a duly stress relieved semi closed structure with steel fabricated frames
• The machine is fitted with a wet type pneumatic clutch and hydraulic overload protection device
• It is also equipped with a pneumatic counter balancing device and a motorized shut height adjustment with digital display
• The main slide is supported by long guides and has bronze linings on six face rectangular supports
• We use certain imported parts for our machine like PLC Circuitry, Duplex valves, Cam controller and a transducer for variable stroke speeds which is optional
• Our ‘JM36’ series is equipped with multiple connecting rod structure and the ‘JHY25’ series with imported dry clutch and with fixed number of strokes

Capacity: 30 Tons to 50 Tons

Salient Features:

• In these types of machines the table sizes vary from 1250 x 2500mm upto 1500 x 6000mm.
• Steel Plate fabricated frames are duly stress relieved by tempering.
• The frames have dual frame construction on them with a rigid side frame supporting the main frame.
• The machine has a large punching diameter of 88.9mm, high turret rotation speed of 30 rpm and rapid feed rate of 106 m/min.
• We have provided a step less hydraulic stroke on machines in MP8 series onwards while the MP7 series have mechanical stroke.
• We use certain imported parts for our machines like ball screws and LM guide, Hydraulics from H+L, Germany. Most of our components are imported from Germany and Japan.
• Our machine has turret features Long sleeve structure and thick series Turret Tooling.
• We source our control options from Siemens and Fanuc.
• The machine is equipped with digital AC servo motors for higher acceleration during feeds, and optional 4th axis (rotary tool) to increase productivity.
• The brush table is available with other options as well.

Capacity: 80 Tons to 2500 Tons

Salient Features:

• It has varying working lengths from 2500mm to 14000mm.
• Duly stress relieved steel plate fabricated frames.
• It has ram cylinders controlled by electro-hydraulic servo valves and is also fitted with Delem DA65W standard 66W which is optional.
• It also has 3+1 Axes standard controls and 8+ 1axes which is optional.
• The Hydraulic crowning system is CNC controlled.
• Most of its components are imported from Germany.
• We also provide with option like quick change tooling etc.

Capacity: Available in various capacities.

Salient Features:

• It is equipped with Steel Plate fabricated frames which are duly stress relieved.
• The machine is fitted with DELEM DAC350 controls and has variable rake angle controlled by CNC controller.
• It has automatic adjustment of cutting length and its four edged shearing blades ensure longer working life.
• The blade clearance is adjusted automatically.
• Most of the components are imported from Germany.

Salient Features:

• It is available in sizes 1.5 mtr upto 4mtrs cutting sizes and has laser power output ranging from 1000W to 4000W.
• The machine has flying optics and gantry type cross beam structure.
• Its exchangeable worktable enables quicker interchange of job and its draw type waste collector makes cleaning easier.
• It is highly flexible and can cut different materials like mild steel, stainless steel, galvanized sheet, plastics, plexi-glass, timber etc.

Capacity: 100 Tons to 1000 Tons

Salient Features:

• Its bed Area varies from 690X630 to 3200 X 2500.
• It is a four column structure and its Cartridge Valve is equipped with Hydraulic Controls for reliability and durability.
• It has shorter connection pipe lines and fewer release points and independent electrical controller.
• Its maintenance is very convenient and has a centralized control system with Inch, semi auto operation.
• Specifications such as Ram working pressure speed, idle speed and full load speed can be adjusted on request.

Salient Features:

• Steel plate fabricated stress relieved.
• Its cartridge valve is equipped with Hydraulic Controls for reliability and durability.
• It has a centralized control system with inch, semi auto operation.

Capacity: 20 Tons to 250 Tons

Salient Features:

• Available in C type and H type.
• It is solid steel plate fabricated and has a left to right shaft.
• We welcome customer’s specification.
• Rolling Key clutch - Standard.
• Pneumatic Clutch - Optional.