Welding Machines,Plasma Welding Machines,Welding Machines Manufacturer,Plasma Welding Machines Manufacturer

Plasma Welding Machines

We are engaged in manufacturing wide variety of Plasma Welding Machines such as Klein Schweisser 150, 400 and Turbo Arc 600 i 10 Plasma Weld. These machines are widely used in construction and metal industries for welding purpose. Our range is acknowledged for optimum performance and durability.

Klein Schweisser 150 Plasma

We manufacture Klein Schweisser 150 Plasma – Welding Machines, which are IGBT based inverter power supply saves precious power. The machines have local or remote arc current setting. Our range is designed in line with international quality standards to meet the requirements of clients.

Details	Klein Schweisser 150 Plasma
Input supply	220 V AC, 1 Phase, 50Hz.
Operating supply voltage range	180 V AC to 250 V AC.
Input Power	4.8 KVA at 150 Amps.
Open circuit voltage ( Main arc )	95 V DC to 105 V DC.
Welding current range	1.0 Amps. DC to 150 Amps. DC.
Welding current control	Stepless with fine control.
Base current	5 Amps. DC to 150 Amps. DC.
Up slope	0 to 10 sec.
Down slope	0 to 10 sec.
Pulse frequency	1 Hz to 1000 Hz System
Pulse on time	10 % to 90 %
Pre flow	0 To 10 sec.
Post flow	0 To 10 sec.
Arc starter	Electronic pilot arc.
Open circuit voltage ( Pilot arc )	100 V DC to 120 V DC.
Pilot arc current	2.0 Amps. DC to 5.0 Amps. DC.
Duty cycle @ 40 deg.cel.Amb.	100 % at 120 Amps.
Class of insulation	H class.
Cooling	Forced air cool.
Protection	IP-21.
Pilot gas supply	Argon, 25 PSI at 0.5-5 ltrs./min.
Shield gas supply	25 PSI at 1-15 ltrs/min pure argon or various mixtures as determined by desired arc char. & metallurgy of the work material.
Weight	55 Kg. Approx.
External Dimensions (L. W. H.)	1005mm. 500mm. 530mm.

Send Enquiry

Plasma Welding Machines (Klein Schweisser 400 Plasma)

We manufacture Plasma Welding Machines – Klein Schweisser 400 Plasma, which saves precious power. The machines have local or remote arc current setting. Our range is designed in line with international quality standards to meet the requirements of clients.

Details	Klein Schweisser 400 Plasma
Input supply	415 V AC, 1 Phase, 50Hz.
Operating supply voltage range	370 V AC to 460 V AC.
Input power	10.5 KVA at 400 Amps.
Open circuit voltage ( Main arc )	95 V DC to 105 V DC.
Welding current range	5.0 Amps. DC to 400 Amps. DC.
Welding current control	Stepless with fine control.
Base current	10 Amps. DC to 400 Amps. DC.
Up slope	0 to 10 sec.
Down slope	0 to 10 sec.
Pulse frequency	1 Hz to 1000 Hz
Pulse on time	10 % to 90 %
Pre flow	0 To 10 sec.
Post flow	0 To 10 sec.
Arc starter	Electronic pilot arc.
Open circuit voltage ( Pilot arc )	100 V DC to 120 V DC.
Pilot arc current	2.0 Amps. DC to 5.0 Amps. DC.
Duty cycle @ 40 deg.cel.Amb.	100 % at 250 Amps.
Class of insulation	H class.
Cooling	Forced air cool.
Protection	IP-21.
Pilot gas supply	Argon, 25 PSI at 0.5-5 ltrs./min.
Shield gas supply	25 PSI at 1-20 ltrs/min pure argon or various mixtures as determined by desired arc char. & metallurgy of the work material.
Weight	55 Kg. Approx.
External Dimensions (L. W. H.)	1005mm. 500mm. 530mm.

Send Enquiry

Turbo Arc 600 i 10 Plasma Weld - Welding Machines

Turbo Arc 600 i 10 Plasma Weld - Welding Machines

Our Turbo Arc 600 i 10 Plasma Weld – Welding Machines is developed using quality tested raw material. The electronic pilot arc system of machine ensures soft start and reliable arc striking. These machines are available in various specifications to meet the requirements of clients

Features:

Less power consumption
Optimum performance
Durable
Reliable
Easy maintenance

Details	Turbo Arc 600 i 10 Plasma Weld
Input supply	415 Volts, 3 Phase, 50Hz.
Operating supply voltage range	370 Volts AC to 460 V AC.
Input power	22 KVA at full load.
Pilot arc current range	5 Amps. DC to 20 Amps. DC.
Pilot arc current control	In steps of 0.01 Amps. (digital control).
Main arc open circuit voltage	90 Volts DC.
Pre flow	0 To 10 sec (In steps of 0.1 secs.).
Post flow	0 To 30 sec (In steps of 0.1 secs.).
Up slope timing	0 To 10 sec (In steps of 0.1 secs.).
Down slope timing	0 To 10 sec (In steps of 0.1 secs.).
Hot start	0 To 100% (In steps of 0.1%).
Soft start	0 To 100% (In steps of 0.1%).
Pulse frequency	0 To 1000 Hz (In steps of 0.1 Hz).
Pulse frequency type	Square wave / Sin wave / Triangular wave (with start & stop delay).
Base current	0 To 600 Amps (In steps of 0.01 Amps).
Pulse on time	0 To 100% (In steps of 0.1%).
Mode	Manual (2T/4T) / Semi auto / Fully auto / Direct mode / Test mode.
CPU	Modular Din rail type (Beckhoff Germany).
Bus Terminals	Modular fieldbus system (Beckhoff Germany).
Communication	ETHER CAT (Beckhoff Germany).
Remote console	Colour display with touch screen control.
Class of Insulation	H class.
Duty cyvcle	70%.
Protection	IP - 21.
Cooling	Forced air cooled.
Pilot Gas	Argon (25 PSI at 0.5 - 5 Ltrs/min).
Shield gas supply	25 PSI at 1-15 Ltrs/min pure argon or various mixtures as determined by desired arc char. & metallurgy of the work metal.

Send Enquiry

Klein Schweisser 150 Plasma

Features:

Optimum performance
Reliable
Less power consumption
Easy maintenance
Durable

Details	Klein Schweisser 150 Plasma
Input supply	220 V AC, 1 Phase, 50Hz.
Operating supply voltage range	180 V AC to 250 V AC.
Input Power	4.8 KVA at 150 Amps.
Open circuit voltage ( Main arc )	95 V DC to 105 V DC.
Welding current range	1.0 Amps. DC to 150 Amps. DC.
Welding current control	Stepless with fine control.
Base current	5 Amps. DC to 150 Amps. DC.
Up slope	0 to 10 sec.
Down slope	0 to 10 sec.
Pulse frequency	1 Hz to 1000 Hz System
Pulse on time	10 % to 90 %
Pre flow	0 To 10 sec.
Post flow	0 To 10 sec.
Arc starter	Electronic pilot arc.
Open circuit voltage ( Pilot arc )	100 V DC to 120 V DC.
Pilot arc current	2.0 Amps. DC to 5.0 Amps. DC.
Duty cycle @ 40 deg.cel.Amb.	100 % at 120 Amps.
Class of insulation	H class.
Cooling	Forced air cool.
Protection	IP-21.
Pilot gas supply	Argon, 25 PSI at 0.5-5 ltrs./min.
Shield gas supply	25 PSI at 1-15 ltrs/min pure argon or various mixtures as determined by desired arc char. & metallurgy of the work material.
Weight	55 Kg. Approx.
External Dimensions (L. W. H.)	1005mm. 500mm. 530mm.

Send Enquiry

Klein Schweisser 400 Plasma - Welding Machines

We offer Klein Schweisser 400 Plasma – Welding Machines that gives a stable arc at as low as 0.5 Amps. These machines are widely acknowledged for excellent welding performance. Our range can be customized as per the specification of clients.

Features:

Durable
Less power consumption
Precision functioning
Easy maintenance
Reliable

MODEL NO.	MPT-50(W) STEP
Primary Voltage	380-440 V 3Phase- 50Hz
Secondary Voltage	260-280 V
Line Current	70 Amp.
Arc Current	100 Amp. 200 Amp.
O.C.V (No load)	300-320 VDC
Power rating	49.0 KVA
Insulation	F class
Duty Cycle	100% at Full load current of 200 Amp.
Cutting Capacity For SS Clean Cut For SS Parting Cut	55mm 60mm

Send Enquiry

Air Plasma Cutting Machines

Inverter Plasma Cutting Machines

Inverter Welding Machines

Micro Plasma Welding Machines

Plasma Welding Machines Klein Schweisser 150 Plasma Plasma Welding Machines (Klein Schweisser 400 Plasma)Turbo Arc 600 i 10 Plasma Weld - Welding Machines Klein Schweisser 400 Plasma - Welding Machines

Air Plasma Torch & Consumables

Showroom

View all our products / services as a slide show.

Play Now