Noida, Uttar Pradesh
Send SMS
Send E-mail

CADDY Electrical Fixings, Fasteners and Supports

Providing you the best range of CADDY Lay In And Troffer Light Fixture Support Clips, CADDY SFCLT Seismic Fixture Clamp (Acoustical), CADDY Snap On Fixture/Box Hanger (Acoustical), CADDY Suspension Bar, CADDY Suspension Bars and CADDY T-Grid Box Hanger (Acoustical) with effective & timely delivery.
Request Callback
CADDY Lay In And Troffer Light Fixture Support Clips

Ask For Price

CADDY Lay In And Troffer Light Fixture Support Clips

Product Description:Features
  • The original earthquake/hurricane clips
  • Complies with NEC Article 410-16 Means of Support
  • Fits round or rectangular head tee bar
  • Clips now painted for "cleaner" installations
  • No installation tools required
Applications

Gives a positive method of supporting troffers and lay-ins.

Catalog No. Description Std Box Qty
515 Straight lip fixtures 100
515A Upturned or straight lip fixtures 100
UL & cUL Listed
No Load Rating - Positioning Only
Yes! I am interested
Request Callback
CADDY SFCLT Seismic Fixture Clamp (Acoustical)

Ask For Price

CADDY SFCLT Seismic Fixture Clamp (Acoustical)

Product Description:The CADDY® SFCLT Seismic Fixture Clamps - part of the CADDY line of fixing and fastening products from ERICO® - attach fixtures securely to the ceiling frame member. This set of reinforcing clamps prevents the T-bar from twisting and disconnecting at the T-Bar intersections in a seismic event. The clamps also prevent the fixture from separating from the T-bar framework. Complies with ICBO Acceptance Criteria 184.Features
  • Cost effective
  • Reusable
  • Secures fixtures to the ceiling frame members
  • Requires no additional chains, cables or slack wires attached to the fixture
  • Strengthens integrity of the T-Bar system
  • Holds in place against the force of standard fire-hose pressure
  • Meets the U.S. building code and electrical code specifications
  • Satisfies NEC® 410.16(C) positive attachment for secure fastening of luminaires (fixtures)
ApplicationsThe CADDY SFCLT family of light fixture clamps consists of connectors for 2' x 4' and 2' x 2' light fixtures, as well as for end-to-end and side-by-side connections of light fixtures and for reinforcement of T-Bar main runner joints.  In addition, they can be used to secure 2' x 2' air diffusers.

The product has been tested for compliance to IBC®, UBC, NEC®, NBC and CEC® standards. It is listed by Warnock Hersey and ETL*, conforms to UL® 1598 and certified to CSA® C22.2 No. 250.00 (Component Only). 

Independent from seismic applications, the CADDY SFCLT clamps may be used to satisfy the requirement of NEC 410.16(C) positive attachment, for secure fastening of luminaires (fixtures) complying with Acceptance Criteria 184.

 

 PART NUMBER  DESCRIPTION  QUANTITY PER BOX  WT. BOX (LBS.)
 SFCLT Seismic Fixture Lighting Clamp (set of 4) for one standard tapered 2' x 4' light fixture  25 sets  18
 SFCLTE Seismic Fixture Lighting Clamp (set of 2) for two standard tapered 2' x 4' light fixtures end-to-end.  In addition, a set of SFCLT is required.  25 sets  18
 SFCLTS Seismic Fixture Lighting Clamp (set of 2) for two standard tapered 2' x 4' light fixtures side-by-side.  In addition, a set of SFCLT is required.  25 sets  18
 SFCLTCF Seismic Fixture Lighting Clamp (set of 2) for one 2' x 2' light fixture.  In addition, a set of SFCLT is required.  50 sets  18
 SFCLTCFS Seismic Fixture Lighting Clamp (set of 2) for reinforcement of T-Bar main runner joints.  100 sets  36

 *ETL is a listed mark of Intertek Testing Services, NA.


Yes! I am interested
Request Callback
CADDY Snap On Fixture/Box Hanger (Acoustical)

Ask For Price

CADDY Snap On Fixture/Box Hanger (Acoustical)

Product Description:Features
  • Snaps easily onto tee bar
  • Hanger comes complete with box mounting clip and 1/4"-20 screw
  • Supports from acoustical tee bar as well as main structure with the use of a drop wire
  • Dual height feature permits 1-1/2" deep electrical box to be mounted flush with tile or off-set 3/4" for plaster ring
  • 512A is height adjustable up to 8" allowing you to install double deep boxes, speaker cases and emergency light fixtures above acoustical tee
  • Not permitted for paddle fans
Applications

Used for installing double deep boxes, speaker cases and emergency light fixtures above acoustical tee.

Catalog Number Description Std Box Qty
S3575BP50 1/4"-20 x 3/8" round head screw 50
S102438BP* 10-24 1/2" Rnd Hd Robertson screw 50
512 Electrical box hanger - 24" span 50
512TC* Electrical box hanger - 24" span 50
51212 Electrical box hanger - 12" span 50
51220 Electrical box hanger - 20" span 50
51230 Electrical box hanger - 30" span 50
CHB Box mounting clip 100
CHBTC* Box mounting clip 100
512A 8" height adjustable - 24" span 50
512ATC* 8" height adjustable - 24" span 50
Not to exceed 20 lbs. without independent wire support to BHC
*For Canadian boxes
Yes! I am interested
Request Callback
CADDY Suspension Bar

Ask For Price

CADDY Suspension Bar

Product Description:ERICO offers the CADDY Suspension Bar for Light Fixtures.Features
  • Reduces installation time
  • No tools required
  • Safe installation
  • Position of fixture adjustable, simply slide to location
  • No center clips required
  • Span adjustable 11" to 26"
ApplicationsVarious suspension bars for light fixtures

Catalog No. Bar Type Light Fixtures
517A*
517FCA
Standard
CAPRI R-10C
CAPRI R-9X
CAPRI PR-751CX
CAPRI R-10X
HALO H17
JUNO AP, APT, IC
JUNO ICT, J, SC
TC, THOMAS RI-IC
517B*
517FCB
Narrow
HALO H7,
CAPRI HSG
LIGHTOLIER 711
517C*
517FCC
Wide
Progress p-7
MARCO

Applicable to a wide variety and many types of light fixtures.
The 517 Series bar replaces the fixture bar.
Measure width of bar to find appropriate bar for fixture.

No Load Rating- Positioning Only

*Works on new taller T-Grid


Yes! I am interested
Request Callback
CADDY Suspension Bars

Ask For Price

CADDY Suspension Bars

Product Description:ERICO offers the CADDY Suspension Bars for Lightolier® Calculite® Series Fixtures.Features
  • Reduces installation time
  • Only a screwdriver required
  • Position of fixture adjustable with span
Applications

Suspension bars for Lightolier Calculite series fixtures

Catalog No. Description Std Box Qty
520* Suspension bars for Lightolier Calculite series fixtures 10

UL & cUL Listed
No Load Rating - Positioning Only

*Works On New Taller T-Grid!

Lightolier and Calculite are registered trademarks of Lightolier, a GENLYTE Company.

Yes! I am interested
Request Callback
CADDY T-Grid Box Hanger (Acoustical)

Ask For Price

CADDY T-Grid Box Hanger (Acoustical)

Product Description:Features
  • Mounts a box to T-grid in less than 30 seconds
  • Now height adjustable for various electrical box depths
  • Installs by hand
  • Drop wire for independent support from clip and/or bar
  • Screws easily to tee bar for added stability
  • Multiple box installations
  • Double deep box installations with 512HDXT Extension Brackets
  • Not permitted for paddle fans
Applications

For mounting boxes to T-Grid.

Ultimate load limit 50 lbs. per bar

Catalog No. Description Std Box Qty
512HD‡ Heavy-duty electrical box hanger with box mounting clip – 24" span 25
512HDTC* Heavy-duty electrical box hanger with box mounting clip – 24" 25
510HD Box mounting clip can be purchased separately for multiple box requirements 100
510HDTC* Box mounting clip can be purchased separately for multiple box requirements 100
512HDXT‡ Extension bracket 3-5/8" height (25 sets) 50
512HDEEP‡ Heavy-duty electrical box hanger with extension bracket – 3-5/8" height 25
512HDEEPTC* Heavy-duty electrical box hanger with extension bracket – 3-5/8" height 25

* For Canadian boxes

‡Works on New Taller T-Grid!

Yes! I am interested
Request Callback
IDS (Acoustical)

Ask For Price

IDS (Acoustical)

Product Description:The IDS series of Independent Support Clips from ERICO® has been expanded to accommodate up to 1½” and 1¾” tall ceiling substructures (T-grids). Independent Support Clips are required by NEC® Article 410.16-C as a way to provide a separate means of support for fixtures. IDS clips, with a static load limit of 65 lbs, are an ideal way to comply with this standard. Features •    Accommodate up to 1½” and 1¾” tall T-grids
•    Requires no installation tools
•    Includes mounting hardware
•    Fits all commercially available T-Grids in a code-compliant manner
•    Optional barrel nuts are available for low-profile track lighting
Applications •    Low-profile track lighting
•    Surface mounted light fixtures
•    Pendant lights
•    Partition walls
•    Acoustical baffles

Part Number
Fig. No.
Grid Size
Stud Length
Static Load Limit
Qty. Per Box



1/4-20 STUD


IDS 1
15/16"
5/8"
65 lbs.
100
IDS15 1
15/16"
1-1/2"
65 ibs.
100
IDS2
1
15/16"
2"
65 lbs.
100
IDS9
1
9/16"
5/8"
65 lbs.
100
IDS95
2
9/16" x 5/16"
5/8"
65 lbs.
100



8-32 STUD
(for track lighting)

IDST* 3
15/16"
9/16"
65 lbs.
100
IDS9T* 3
9/16"
9/16"
65 lbs.
100
IDS95T* 2
9/16" x 5/16"
9/16"
65 lbs.
100
* Uses identical nuts to Figure 3

NEC is a registered trademark of, and the National Electric Code (NEC) standard is a copyright of the National Fire Protection Association.
Yes! I am interested
Request Callback
Caddy

Ask For Price

Caddy

Product Description:

ERICO offers "C" and "Z" Purlin Clips.

Features
  • One fastener fits flanges 1/16" to 1/4"
  • Supports wire or rod from bar joist, C Purlin (VF14) or Z Purlin (AF14)
  • Installs from floor with VAFT tool and conduit .
Applications

CADDY AF/VF series for "C" and "Z" purlin can be hammered on or installed from the floor with the VAFT tool and rigid conduit. VF also works on open bar joist.

Catalog No. Fig No. Description Std Box Qty
VF14 1 1/16" to 1/4" vertical flange for wrap wire, "S" hooks, bolting straps, WMX6 100
VF14708 2 1/16" to 1/4" to #8 wire or 1/4" plain rod 100
VF146A 3 1/16" to 1/4" to 3/8" plain rod 100
VF144TI 4 1/16" to 1/4" to 1/4" threaded rod 100
VF146TI 4 1/16" to 1/4" to 3/8" threaded rod 100
VF146T 5 1/16" to 1/4" to 3/8" threaded rod (nuts required) 100
AF14708 6 1/16" to 1/4" Z Purlin for wrap wire, "S" hooks, bolting straps, WMX6 100
AF146A 7 1/16" to 1/4" to #8 wire or 1/4" plain rod 100
AF144TI 8 1/16" to 1/4" to 3/8" plain rod 100
AF146TI 9 1/16" to 1/4" to 3/8" threaded rod 100
AF146T 9 1/16" to 1/4" to 3/8" threaded rod 100
AF146T 10 1/16" to 1/4" to 3/8" threaded rod (nuts required) 100
VAFT 11 Installation tool for VF & AF assemblies 1
NOTE: VF for vertical flange only. AF for angle flange only. Installation tool part number VAFT.

 

Yes! I am interested
Request Callback
CADDY 122, 123 Clip Range (Beam/Purlin)

Ask For Price

CADDY 122, 123 Clip Range (Beam/Purlin)

Product Description:The CADDY range of 122, 123 clips are designed for installation of services to angled purlin section.Features122 Clip
  • Profile section maximum thickness of 2.8 mm
  • Return flange height >= 15 mm
  • EPZ corrosion protection
  • Can be used in combination with HSC Snap Clip

122-MA Clip

  • Same general characteristics as the 122 clip
  • For fast and accurate height adjustment, simply squeeze the spring steel component
  • The load rating applies to the threaded rod vertically suspended

122-Ti/T Clip

  • Same general characteristics as the 122 clip
  • MTi - 6, 8 or 10 mm thread impression clips
  • T10 - 11 mm clearance hole for use with threaded rods up to 10 mm diameter
  • VKM or HM accessories
  • Mti/T10 components will swivel to allow for variable purlin angle

123 Clip

  • Same general characteristics as the 122 clip
  • Ø 7 mm clearance hole
  • EPZ corrosion protection

123-M Clip

  • Same general characteristics as the 122 clip
  • Conduit clip rotates 360°
  • The conduit clip is locked with pliers
Yes! I am interested
Request Callback
CADDY 4J Clips (Beam/Purlin)

Ask For Price

CADDY 4J Clips (Beam/Purlin)

Product Description:The CADDY 4J Clips are designed for installing electrical services.Features4J Clip
  • For profiles with a width of 38 to 60 mm and 3 mm thickness
  • Secured into position with simple twisting action
  • Square hole 7 mm
  • EPZ corrosion protection

4J-SM Clip

  • Same general characteristics as the 4J Clip
  • Riveted bolt M6 x 16 mm
Applications

4J Clip recommended for installing electrical services.

4J-SM Clip recommended for fixing junction boxes, light fittings, etc.

Yes! I am interested
Request Callback
CADDY AF Clip (Beam/Purlin)

Ask For Price

CADDY AF Clip (Beam/Purlin)

Product Description:ERICO offers the CADDY AF Clip.Features
  • Profiles of 1.5 to 6 mm thickness
  • EPZ corrosion protection
  • Can be used in combination with HSC Snap Clips
Applications

Use for the suspension of services from angled purlin section.

Description Part No. A mm Protection Pack Load
AF14 179860 1.5-6 4 100 35
Yes! I am interested
Request Callback
CADDY BC200 Series Beam Clamps (Beam/Purlin)

Ask For Price

CADDY BC200 Series Beam Clamps (Beam/Purlin)

Product Description:

ERICO offers BC200 Series Beam Clamps.

Features
  • Easy installation for beam flanges 1/8" to 5/8"
  • Supports 1/4" threaded rod, 1/4" threaded bridle rings and boxes
  • Available riveted to conduit clips 1/2" thru 2"
  • Bright zinc finish
  • Threaded hole on back and bottom
Applications

CADDY BC200 series beam clamps fit flanges up to 5/8" and accept 1/4"-20 threaded components. Available pre-riveted to conduit/pipe hangers up to 2".

Catalog No. Fig No. Rigid EMT Std Box Qty
BC200 1 50
BC200 CD0B 2 1/2" 1/2" 50
BC200 CD1B 2 3/4" 3/4" 50
BC200 CD2B 2 1" 1" 50
BC200 CD2.5B 2 1-1/4" 50
BC200 CD3B 2 1-1/4" 1-1/2" 50
BC200 CD4B 2 1-1/2" 25
BC200 CD5B 2 2" 2" 25
Yes! I am interested
Request Callback
CADDY BC400 Series Big Beam Clamps (Beam/Purlin)

Ask For Price

CADDY BC400 Series Big Beam Clamps (Beam/Purlin)

Product Description:CADDY BC400 beam clamps fit flanges up to 3/4" and accept 3/8"-16 threaded components.Features
  • Threaded holes accommodate 3/8" threaded rod or 3/8" bolt
  • Attaches to beam flange up to 3/4"
  • Ideal for creating a threaded rod trapeze
  • Bright zinc finish
ApplicationsIdeal for electrical, mechanical and HVAC applications.

Catalog No. Description Std Box Qty
BC400 For 3/8" threaded rod or 3/8" - 16 bolts to beam flange through 3/4" 25

Yes! I am interested
Request Callback
CADDY Beam Clamp

Ask For Price

CADDY Beam Clamp

Product Description:ERICO offers the CADDY Beam Clamp with Swivel Option - Model BC10.Features
  • Accommodates rod sizes up to 1/2" Ø
  • For attachment to beams or angles up to 3/4" (20 mm) thick
  • Designed to allow swivel up to 15° from bottom holes or with the use of BC15 swivel (available separately) for attachment to inclined beams without bending the rod
  • Hardened cup point setscrew to provide secure grip on tapered sections
  • Stamped steel with electrogalvanized finish for good corrosion protection
  • Available in hot dipped galvanized finish (special order)
  • J-Bolt assembly available for more secure attachment in industrial or seismic applications
ApplicationsFor attachment to beams or angles up to 3/4" (20 mm) thick.
Catalog No. RS M C MAX Coating Std Box Qty F1
(Lbs)
F2
(Lbs)
BC100000EG 1/2" 3/8" - 16 3/4" EG 25 500 300
F1 is load rating from the front hole
F2 is load rating from the back hole

Yes! I am interested
Request Callback
CADDY Beam Clamps (Beam/Purlin)

Ask For Price

CADDY Beam Clamps (Beam/Purlin)

Product Description:

ERICO offers a range of CADDY Beam Clamps.

Features
  • Easy installation to beam flanges up to 1/2"
  • Supports 1/4" and 3/8" threaded rod, S-hooks, electrical boxes, conduit and bridle rings
  • Accommodates standard 1/4"-20 or #10-24 threaded bridle rings
NOTE: When using rigid conduit on P Series, use next size larger clip (1/2" rigid use 12P). Applications

The "lightweight-heavyweight" alternative to malleable clamps for support of various components to beam. Pre-riveted combinations available.

Catalog No. Fig No. Description Static Load Limit Std Box Qty
BC 1 Beam clamp thru 1/2" flange 100 lbs. 100
BCISN375 2 Beam clamp thru 1/2" flange 3/8" smart nut 100 lbs. 100
BC812M 3 1/2" to 3/4" conduit to beam thru 1/2" flange 100 lbs. 100
BC16M 3 1" conduit to beam thru 1/2" flange 100 lbs. 100
BC20M 3 1-1/4" conduit to beam thru 1/2" flange 100 lbs. 100
BC24M 3 1-1/2" conduit to beam thru 1/2" flange 100 lbs. 50
BC32M 3 2" conduit to beam thru 1/2" flange 100 lbs. 50
BC812MSM 4 1/2" to 3/4" conduit to beam thru 1/2" flange 25 lbs. 100
BC16MSM 4 1" conduit to beam thru 1/2" flange 25 lbs. 100
BC20MSM 4 1-1/4" conduit to beam thru 1/2" flange 25 lbs. 100
BC24MSM 4 1-1/2" conduit to beam thru 1/2" flange 25 lbs. 50
BC32MSM 4 2" conduit to beam thru 1/2" flange 25 lbs. 50
BC8P 5 1/2" conduit to beam thru 1/2" flange 25 lbs.* 100
BC12P 5 3/4" conduit to beam thru 1/2" flange 25 lbs.* 100
BC16P 5 1" conduit to beam thru 1/2" flange 25 lbs.* 100
BC8PSM 6 1/2" conduit to beam thru 1/2" flange 15 lbs.* 100
BC12PSM 6 3/4" conduit to beam thru 1/2" flange 15 lbs.* 100
BC16PSM 6 1" conduit to beam thru 1/2" flange 15 lbs.* 100
*Ultimate static load limit.
Yes! I am interested
Request Callback
CADDY Beam Retainer Accessories (Beam/Purlin)

Ask For Price

CADDY Beam Retainer Accessories (Beam/Purlin)

Product Description:ERICO offers CADDY Beam Retainer Accessories. Features

For use with CADDY beam clamps

Applications

For use with CADDY beam clamps

Catalog Number L A MAX Coating Std Box Qty
  in mm in mm    
BC090900EG 9" 230 6" 150 PG 50
BC091200EG 12" 300 9" 230 PG 50
BC091500EG 15" 380 12" 300 PG 25
Yes! I am interested
Request Callback
CADDY Big Mouth Universal Beam Clamp (Beam/Purlin)

Ask For Price

CADDY Big Mouth Universal Beam Clamp (Beam/Purlin)

Product Description:ERICO offers two versions of the Big Mouth Universal Beam Clamp.Features
  • Malleable iron body
  • Set screw with hardened cup point locknut
  • Electro zinc plated
  • Centre distance between rod and screw - 25.4 mm
  • Extra-wide mouth
  • UL approval
  • FM approval
  • Retainer strap available on request
Applications

CADDY Big Mouth Universal Beam Clamps fit flanges up to 48.4mm.

Description Part No. Ø  M mm A mm C mm H mm Protection Pack
BTK M10 389890 M10 21.4 31.8 48.4 8.7 1 50
BTK M12 388890 M12 18.9 31.8 48.4 9.5 1 50

Ø = Diameter
M = Bolt Size
A = Flange Width
C = Flange Size
H = Fastener Height

Yes! I am interested
Request Callback
CADDY Bulb Tee Clip (Beam/Purlin)

Ask For Price

CADDY Bulb Tee Clip (Beam/Purlin)

Product Description:

ERICO offers Caddy Bulb Tee Clips.

Features
  • Provides means of support from underside of bulb tee 1-1/2" thru 2-3/8" wide
  • Ceiling material not defaced when applied
  • Requires only hammer to install
Applications

CADDY Bulb Tee Clips are available for 1/4" carriage bolts, 1/4"-20 nuts, 3/8"-16 stud or nut.

NOTE: Other stud lengths quoted on request.

Catalog No. Fig No. Conduit Size Std Box Qty
4J2438 1 Jr. Beam Clamp for bulb tees. Use standard 1/4" carriage bolt (not furnished) 100
4NJ2438 2 Jr. Beam Clamp for bulb tees – 1/4"-20 nut included 100
6NJ2438 2 Jr. Beam Clamp for bulb tees – 3/8"-16 nut included 100
4J2438S 3 Jr. Beam Clamp for bulb tee with 3/8" long 1/4"-20 stud 100
Yes! I am interested
Request Callback
CADDY C-Clamp (Beam/Purlin)

Ask For Price

CADDY C-Clamp (Beam/Purlin)

Product Description:The CADDY C-Clamp is designed for suspension or direct attachment of services and cables.Features
  • For beam flanges up to 45 mm thickness
  • The clamp is serrated for increased security
  • Used in combination with CR clamps for conduits and cables
  • Used in combination with SM nuts for threaded rods Can be used in combination with SPP (Special Paint Protection) washer when securing onto protected surfaces
  • Can be used in combination with HSC Snap Clips
  • Hot dipped galvanised or stainless steel
ApplicationsFor suspension or direct attachment and installation of services, conduits, cables, threaded rods, chains, etc.

Description Part No. C mm M mm Protection Pack Load
C20 336100 20 6 x 25 3 100 110
C30 336110 30 8 x 30 3 100 110
C45 336120 45 8 x 30 3 50 110
C20-2 336130 20 6 x 25 2 100 110
C30-2 336140 30 8 x 30 2 100 110
C45-2 336150 45 8 x 30 2 50 110

Yes! I am interested
Request Callback
CADDY C-EC Clamp (Beam/Purlin)

Ask For Price

CADDY C-EC Clamp (Beam/Purlin)

Product Description:The CADDY C-EC Clamp is used for securing conduits and cables to strut profiles.Features
  • 6 to 100 mm diameter range
  • Compatible with 41 x 41 mm and 41 x 21 mm strut profiles
  • Protective inserts are available on request to prevent cable damage due to excessive torque
Applications For securing conduits and cables to strut profiles

DescriptionPart No.Ø mmProtectionPack
C 12EC3376006-123100
C 16EC33761012-163100
C 20EC33762016-203100
C 24EC33763020-243100
C 28EC33764024-283100
C 32EC33765028-323100
C 36EC33766032-363100
C 40EC33767036-403100
C 44EC33768040-443100
C 48EC33769044-483100
C 52EC33770048-52350
C 56EC33771052-56350
C 60EC33772056-60350
C 64EC33773060-64350
C 70EC33774064-70350
C 76EC33775070-76325
C 82EC33776076-82325
C 88EC33777082-88325
C 94EC33778088-94325
C100EC33779094-100325
Yes! I am interested
Request Callback
CADDY C-ES Clamp (Beam/Purlin)

Ask For Price

CADDY C-ES Clamp (Beam/Purlin)

Product Description:

ERICO offers the CADDY C-ES clamp.

Features
  • Same general characteristics as the CADDY C-EU Clamp
  • For vertical profiles L or U, maximum height 40 mm
  • Protective inserts to prevent cable damage due to excessive torque are available upon request
Applications

The CADDY C-ES Clamp is designed for securing conduits, pipes or cables at right angles directly to the beam.

DescriptionPart No.Ø mmProtectionPack
C 12ES3370006-123100
C 16ES33701012-163100
C 20ES33702016-203100
C 24ES33703020-243100
C 28ES33704024-283100
C 32ES33705028-323100
C 36ES33706032-363100
C 40ES33707036-403100
C 44ES33708040-443100
C 48ES33709044-483100
C 52ES33710048-52350
C 56ES33711052-56350
C 60ES33712056-60350
C 64ES33713060-64350
C 70ES33714064-70350
C 76ES33715070-76325
C 82ES33716076-82325
C 88ES33717082-88325
C 94ES33718088-94325
C100ES33719094-100325
Yes! I am interested
Request Callback
CADDY C-EU Clamp (Beam/Purlin)

Ask For Price

CADDY C-EU Clamp (Beam/Purlin)

Product Description:

ERICO offers the CADDY C-EU clamp.

Features
  • The C-EU clamp can be used on beams up to 12 mm thickness
  • The clamp has double serrations
  • Protective inserts are available on request to prevent cable damage due to excessive torque
Applications

The CADDY C-EU clamp is used for securing conduits, pipes or cables at right angles directly onto the beam.

DescriptionPart No.Ø mmProtectionPack
C 12EU3373006-123100
C 16EU33731012-163100
C 20EU33732016-203100
C 24EU33733020-243100
C 28EU33734024-283100
C 32EU33735028-323100
C 36EU33736032-363100
C 40EU33737036-403100
C 44EU33738040-443100
C 48EU33739044-483100
C 52EU33740048-52350
C 56EU33741052-56350
C 60EU33742056-60350
C 64EU33743060-64350
C 70EU33744064-70350
C 76EU33745070-76325
C 82EU33746076-82325
C 88EU33747082-88325
C 94EU33748088-94325
C100EU33749094-100325
Yes! I am interested
Request Callback
CADDY Clamping System 6000HB (Beam/Purlin)

Ask For Price

CADDY Clamping System 6000HB (Beam/Purlin)

Product Description:The CADDY Clamping System 6000HB is designed for the suspension of heavy components from inclined beam flanges.Features
  • Multidirectional universal clamp
  • For beam flanges up to 35 mm thickness
  • Serrated and perforated 41 x 41 mm profile
  • Beam flange angle - maximum 45°
  • Suspension angle - maximum 30°
ApplicationsFor the suspension of heavy components from inclined beam flanges

Description Part No. L mm Protection Pack Load
6001HB 336000 300 1 + 3 1 300
6002HB 336010 400 1 + 3 1 230
6003HB 336020 500 1 + 3 1 180

Yes! I am interested
Request Callback
CADDY Clamping System HB2 (Beam/Purlin)

Ask For Price

CADDY Clamping System HB2 (Beam/Purlin)

Product Description:The CADDY Clamping System HB2 is designed for the suspension of lighter components from inclined beam flanges.Features
  • Multidirectional universal clamp
  • For beam flanges up to 24 mm thickness
  • Serrated and perforated 41 x 41 mm profile
  • The load ratings are in accordance with the position of the HB2
ApplicationsSame general principles as the System 6000HB, but for lighter applications

Description Part No. A mm Protection Pack
HB2 336030 < 24 1 50
HB2-3 336040 < 24 3 50

Yes! I am interested
Request Callback
CADDY Clamping Systems 3000, 2000, 1000 (Beam/Purlin)

Ask For Price

CADDY Clamping Systems 3000, 2000, 1000 (Beam/Purlin)

Product Description:CADDY Clamping Systems 3000, 2000 and 1000 are designed for attaching or suspending lighter elements or loads.FeaturesSystem 3000
  • Perforated profile 30 x 15 x 2.5 mm (double perforation)
  • For beam flanges upto 15 mm thickness
  • Electro zinc plated
  • Components available as complete or separate units

System 2000

  • Perforated profile 25 x 12 x 2 mm (double perforation)
  • For beam flanges up to 11 mm thickness
  • Components available as complete or separate units

System 1000

  • Perforated profiles 20 x 10 x 1.5 mm (single perforation)
  • For beam flanges up to 7 mm thickness
  • Electro zinc plated
  • Components available as complete or separate units
Applications
  • System 3000 - for attaching or suspending lighter elements: light duty cable trays, trunking, ductwork, etc, with maximum security onto steel beams
  • System 2000 - Similar to System 3000, but for lighter loads
  • System 1000 - For attaching or suspending light loads
Yes! I am interested
Request Callback
CADDY Clamps - Stainless Steel Range (Beam/Purlin)

Ask For Price

CADDY Clamps - Stainless Steel Range (Beam/Purlin)

Product Description:ERICO offers the CADDY C-Clamp and the System 5000 for stainless steel applications.FeaturesC-Clamp
  • For beam flanges up to 45 mm thickness
  • The clamp is serrated for increased security
  • Used in combination with CR clamps for conduits and cables
  • Used in combination with SM nuts for threaded rods
  • Can be used in combination with SPP (Special Paint Protection) washer when securing onto protected surfaces
  • Can be used in combination with HSC Snap Clips
  • Hot dipped galvanised or stainless steel

Clamping System 5000

  • Slotted profiles
  • For beam flange up to 35 mm thickness
  • Hot dipped galvanised or stainless steel
  • Available complete or as separate components
Applications

C-Clamp - For suspension or direct attachment and installation of services, conduits, cables, threaded rods, chains, etc.

System 5000 - For attaching or suspending semi-heavy services such as cable trays, ventilation ductwork, trunking, pipes, etc., with maximum security onto steel beams.

Description Part No. C mm M mm Protection Pack Load
C20 336100 20 6 x 25 3 100 110
C30 336110 30 8 x 30 3 100 110
C45 336120 45 8 x 30 3 50 110
C20-2 336130 20 6 x 25 2 100 110
C30-2 336140 30 8 x 30 2 100 110
C45-2 336150 45 8 x 30 2 50 110
Yes! I am interested
Request Callback
CADDY D1, D2, D3 Purlin Clamps (Beam/Purlin)

Ask For Price

CADDY D1, D2, D3 Purlin Clamps (Beam/Purlin)

Product Description:The CADDY D1, D2, D3 Purlin Clamps are designed for the suspension of threaded rod from purlin section.Features
  • D1 - straight, lower hole is slotted, 11 x 14 mm, to allow for variable purlin angle
  • D2 - obtuse angle 15°
  • D3 - reflex angle 15°
  • D2/D3 angled to ensure perpendicular suspension from purlin
  • Maximum height, return flange, 24 mm
  • For threaded rods maximum 10 mm
ApplicationsDesigned for the suspension of threaded rod from purlin section.

Description Part No. A mm Ø mm Protection Pack Load
D1 336280 <4 11 1 100 120
D2 339100 <4 11 1 100 120
D3 339110 <4 11 1 100 120

Yes! I am interested
Request Callback
CADDY EBC Beam Clamp (Beam/Purlin)

Ask For Price

CADDY EBC Beam Clamp (Beam/Purlin)

Product Description:The CADDY EBC range of beam clamps is designed for attaching or suspending services, cables, pipes etc, from steel beams and sections.Features

EBC Beam Clamp

  • For beam flanges up to 16 mm thickness
  • Serrated clamp for improved load rating
  • EPZ corrosion protection
  • Can also be used in combination with HSC Snap Clips

EBC-MA Beam Clamp

  • Same general characteristics as EBC
  • For height adjustment, simply squeeze the spring steel component
  • The load rating applies to the vertically suspended threaded rod

EBC-MSM Beam Clamp

  • Same general characteristics as the EBC
  • Load rating applies to conduit in the vertical axis
  • The conduit support clip will rotate 360°
  • The conduit clip is locked secure with pliers

EBC-M Beam Clamp

  • Same general characteristics as the EBC-MSM but for vertical conduit support
  • The conduit clip will rotate 360°

EBC-RBMX Beam Clamp

  • Same general characteristics as the EBC
  • The cables are simply pushed into position

EBC-P Beam Clamp

  • Same general characteristics as the EBC
  • The conduits are simply pushed into position
  • The conduit clip will rotate 360°

EBC-PSM Beam Clamp

  • Same characteristics as the EBC-P
  • Rotating clip riveted onto the side of EBC
Applications

For attaching or suspending services with threaded rods, chains or wires from steel beams and sections.

Yes! I am interested
Request Callback
CADDY EM Pipe Clip Range (Beam/Purlin)

Ask For Price

CADDY EM Pipe Clip Range (Beam/Purlin)

Product Description:

ERICO offers the CADDY EM Pipe Clip Range. 

FeaturesEM Clip
  • Spring steel clip, EPZ corrosion protection (also available in stainless steel)
  • Beam flange thickness - 3-20 mm
  • Simply hammered into position
  • Two M6 thread impression holes
  • Can be used in combination with HSC Snap Clips

EM-SM Clip

  • Same general characteristics as the EM-clip
  • Riveted stud M6 x 11 mm for securing equipment

EM-P Clip

  • Same general characteristics as the EM clip
  • The conduit is simply pushed into position
  • Conduit clip will rotate 360°

EM-M Clip

  • Same general characteristics as the EM clip
  • The conduit clip is locked secure with pliers
  • Conduit clip rotates 360°
ApplicationsThe CADDY EM range of clips is designed for securing services, cables and pipes.
Yes! I am interested
Request Callback
CADDY H Clip Range - Europe/Asia (Beam/Purlin)

Ask For Price

CADDY H Clip Range - Europe/Asia (Beam/Purlin)

Product Description:The CADDY H Clip range is designed for suspending or attaching services, cables, etc. to metal beams.FeaturesH Clip
  • Spring steel clip with EPZ corrosion protection (also available in stainless steel)
  • Profile thickness: 2-20 mm max
  • Simply hammer into position

H-i Clip

  • With M6 thread impression

H-iX Clip

  • Riveted stud M6 x 11 mm

H-ST Clip

  • 2H4ST3 - ideal for purlin applications
  • Steel strip is easily formed into place by hand

H-RBMX Clip

  • Allows cable separation
  • Cables are pushed into position

H-CA/H-CB Clips

  • Single (CA) or double (CB) application

H-CT Clip

  • For all types of cable ties up to a max size of 9 x 2 mm

H-CTB Clip

  • Polyamide cable ties available in black or white

H-MA Clip

  • To adjust height squeeze the spring steel component

H-Ti/T Clip

  • MTi - M6, M8 or M10 thread impression clips
  • T10 - 11 mm clearance hole for use with threaded rods up to 10 mm diameter
  • Can be used in combination with VKM or HM nuts

H-S Clip

  • Can be used with banding up to 25 mm max width
  • For installation parallel to the beam

H-SR Clip

  • With banding suspension component at 90° to the beam

H-Di Clip

  • Same general characteristics as the H-Clip

H-MSM Clip

  • Conduit clip securely locked into position with pliers
  • Clip will rotate 360°

H-PSM Clip

  • Conduit is pushed into position
  • Clip will rotate 360°

H-PiN Clip

  • Conduit is pushed into position
Applications
  • The H Clip range is extensive and includes the following:
    • H Clip - for attaching or suspending services by chains or wires
    • H-i Clip - for threaded rod suspensions
    • H-iX Clip - for securing electrical services
    • H-ST Clip - for retaining cables onto the beam flange
    • H-RBMX Clip - for installation of communications and low voltage cables
    • H-CA/H-CB Clips - for installation of unprotected copper cables
    • H-CT Clip - for installation of cables with cable ties
    • H-CTB Clip - for cable installation with polyamide or stainless steel locking cable ties
    • H-MA Clip - for suspension of services with threaded rod
    • H-Ti/T Clip - for suspension from beam with threaded rod
    • H-S Clip - for installation with perforated banding or strapping
    • H-SR Clip - as H-S Clip but with banding suspension
    • H-Di Clip - for attaching electrical junction boxes
    • H-MSM Clip - for securing conduits, pipes or cables to the side of beams
    • H-PSM Clip - for securing conduit clips horizontally or vertically to beams
    • H-PiN Clip - for attaching conduits inside the beam
Yes! I am interested
Request Callback
CADDY Hammer-On Flange Clip (Beam/Purlin)

Ask For Price

CADDY Hammer-On Flange Clip (Beam/Purlin)

Product Description:CADDY Hammer-On Flange Clips offers a 1/4"-20 thread for (side or underside) beam attachment of components. Also available with a 1/4"-20 x 3" staked stud.Features
  • When used with CADDY combination conduit hanger, the conduit run lines up with "knock-outs" in outlet box and eliminates offsets and bends
  • Provided with a 1/4"-20 thread impression so that the box may be quickly and securely attached to the clamp
  • Also available with a staked stud, 1/4"-20 x 3/8" to provide easier attachment of outlet boxes to beams - eliminates having to use loose screws
  • The CADDY combination washer-wing nut (Cat. No. 4WN) can be used to attach box. (Not included.)
ApplicationsHelps eliminate offsets and bends.

Catalog No. Fig. No. Flange Thickness Std Box Qty
M24 1 1/8"-1/4" 100
M58 1 5/16"-1/2" 100
M912 1 9/16"-3/4" 100
M24S 2 1/8"-1/4" 100
M58S 2 5/16"-1/2" 100
M912S 2 9/16"-3/4" 100

Yes! I am interested
Request Callback
CADDY Hammer-On Flange Clip (Beam/Purlin)

Ask For Price

CADDY Hammer-On Flange Clip (Beam/Purlin)

Product Description:CADDY Hammer-On beam clamps are available for flanges up to 3/4".Features
  • Locates a "portable" 1/4" hole with just a hammer
  • Installs easily regardless of insulation materials on beam flange
  • Fits most beams and bulb tees
ApplicationsFor providing a "portable" hole on most size beams and bulb tees.

Catalog No. Fig No. Flange Thickness Std Box Qty Static Load Limit
2H4 1 3/32"-9/64" 100 160 lbs.
4H24 2 1/8"-1/4" 100 200 lbs.
4H58 2 5/16"-1/2" 100 200 lbs.
4H912 2 9/16"-3/4" 100 200 lbs.

Yes! I am interested
Request Callback
CADDY Hammer-On Z Purlin Clips (Beam/Purlin)

Ask For Price

CADDY Hammer-On Z Purlin Clips (Beam/Purlin)

Product Description:ERICO offers CADDY Hammer-On Z Purlin Clips.Features
  • Hammer-on clip compensates for angle of purlin
  • Provides method for attaching conduit and boxes to purlin
Applications

CADDY Hammer-On Z Purlin Clips are available pre-riveted to other CADDY fasteners for a variety of applications.

Catalog No. Fig No. Description Std Box Qty
122 1 For wrap wire, "S" hooks bolting straps 100
123 2 1/4" bottom hole to Z purlin for assembly 100
122708 3 For #8 wire or 1/4" plain rod to Z purlin 100
1226A 4 For 3/8" plain rod to Z purlin 100
1224TI 5 For 1/4" threaded rod to Z purlin 100
1226TI 5 For 3/8" threaded rod to Z purlin 100
1226T 5 For 1/4" and 3/8" threaded rod to Z purlin, nuts required 100
1236M 6 For 3/8" conduit to Z purlin 100
123812M 6 For 1/2" to 3/4"conduit to Z purlin 100
1238P 7* For 1/2" conduit to Z purlin 100
12312P 7* For 3/4"conduit to Z purlin 100
12316M 6 For 1"conduit to Z purlin 100
12316P 7* For 1"conduit to Z purlin 50
12320M 6 For 1 1/4"conduit to Z purlin 50
* Purlin thickness 13 - 16 gage
NOTE: When using Rigid conduit on P Series, use next size large clip (1/2" Rigid use 12-P)
NOTE: Loads indicated are for CADDY Fasteners only
Yes! I am interested
Request Callback
CADDY Kit INC8 (Beam/Purlin)

Ask For Price

CADDY Kit INC8 (Beam/Purlin)

Product Description:The CADDY Kit INC8 is used for securing services and equipment inside H or C section beams.Features
  • The kit contains 2 preformed mounting plates and 2 high tensile bolts M8 x 25 mm
  • EPZ corrosion protection
  • Bolts electro zinc plated
  • Used in combination with 41 x 41 mm and 41 x 21 mm strut profiles
ApplicationsThe CADDY Kit INC8 is used for securing services and equipment, either horizontally or vertically inside H or C section beams.

Description Part No. A mm Protection Pack Load
INC8 336290 13 4 100 45

Yes! I am interested
Request Callback
CADDY Malleable Beam Clamp - Model 255 (Beam/Purlin)

Ask For Price

CADDY Malleable Beam Clamp - Model 255 (Beam/Purlin)

Product Description:

ERICO offers the CADDY Malleable Beam Clamp.

Features
  • Available for threaded rod sizes 3/8" to 5/8" diameter
  • For attachment to beams or angles up to 3/4" (20 mm) thick
  • Hardened cup point setscrew to provide secure grip on tapered sections
  • Malleable iron clamp with electrogalvanized finish for good corrosion protection
  • Available with optional locknut and/or in hot dipped galvanized finish (special order)
  • Retaining strap available separately, for more secure attachment for industrial or seismic applications
Applications

The CADDY Malleable Beam Clamp (Model 255) is available for 3/8", 1/2" and 5/8" threaded rod to beam flanges up to 3/4" thick.

Catalog No. RS M C MAX
in
H
in
W
in
Coating Std Box Qty Lbs
2550037EG 3/8" - 16 3/8" - 16 3/4" 1-3/4" 1-11/16" EG 100 400
2550050EG 1/2" - 13 3/8" - 16 3/4" 1-3/4" 1-11/16" EG 100 400
2550062EG 5/8" - 11 3/8" - 16 3/4" 2-15/16" 2-1/2" EG 50 400
C = Flange Size
H = Fastener Height
M = Bolt Size
RS = Rod Size
Yes! I am interested
Request Callback
CADDY Multi-Flange Rod Hangers (Beam/Purlin)

Ask For Price

CADDY Multi-Flange Rod Hangers (Beam/Purlin)

Product Description:

ERICO offers CADDY Multi-Flange Rod Hangers.

Features
  • C or Z Purlins or up to 1/4" (7mm) horizontal beam flange
  • Slotted, Hex, Robertson, Phillips combo head bolt
  • Hardened cup point setscrew for secure grip
  • Fast installation of threaded components ( 1/4" or 3/8"), no nuts required.
  • Swivel feature option
  • Electrogalvanized finish for good corrosion protection
  • Available in Hot Dipped Galvanized finish (special order)
NOTE: Loads up to 200 lbs. (0.90 kN) on C or Z purlins or 160 lbs. (0.71 kN) on horizontal beams.Applications

CADDY Multi-Flange Rod Hangers work on C & Z purlins as well as I-beam/bar joist flanges. Available with a swivel to permit straight threaded rod drops from pitched roofs.

Catalog No. Fig No. Description Thread Std Box Qty
PH4 1 Rod Hanger 1/4"-20 25
PH6 1 Rod Hanger 3/8"-16 25
PHSW4 2 Rod Hanger with Swivel 1/4"-20 25
PHSW6 2 Rod Hanger with Swivel 3/8"-16 25
Yes! I am interested
Request Callback
CADDY Multi-Purpose Purlin Clamp - Model 315 (Beam/Purlin)

Ask For Price

CADDY Multi-Purpose Purlin Clamp - Model 315 (Beam/Purlin)

Product Description:CADDY Multi-Purpose Purlin Clamps (Model 315) permit attachment of 3/8"-16 threaded rod to purlins and beams without drilling.Features
  • Large mouth opening (1-5/8"- 41 mm) to fit large thick flange (bottom flange) steel beams or angles and large lip "C" or "Z" Purlins
  • Available for threaded rod sizes 3/8" diameter
  • Attaches to a wide variety of structural sections including "C" Purlins, angles, channels and beams
  • Locknut and hardened cup point setscrew to provide secure grip on tapered sections
  • Malleable iron clamp with electrogalvanized finish for good corrosion protection
  • Available in hot dipped galvanized finish (special order)
ApplicationsFor attachment of 3/8"-16 threaded rod to purlins and beams without drilling.

Catalog Number RS M C max (in) Coating Std Box Qty Lbs
3150037EG 3/8" - 16 3/8" - 16 1 EG 25 400
C = Flange Size
M = Bolt Size
RS = Rod Size

Yes! I am interested
Request Callback
CADDY Pipe-To-Beam Clamps (Beam/Purlin)

Ask For Price

CADDY Pipe-To-Beam Clamps (Beam/Purlin)

Product Description:ERICO offers the CADDY Pipe-to-Beam Clamps.Features
  • Malleable iron casting with steel hardware
  • Hot dipped galvanized coating for excellent corrosion protection
  • Range for 3/8” - 4” diameter pipe
  • Available with stainless steel hardware (special order)
ApplicationsIdeal for direct attachment of conduit to steel structural sections.

Catalog No. PS Std Box
Qty
Qty Exception
PAR- - RA 0037HD 3/8" 25  
PAR- ET- RA 0050HD 1/2" 25  
PAR- ET- RA 0075HD 3/4" 25  
PAR- ET-  RA 0100HD 1" 25  
PAR- ET-  RA 0125HD 1-1/4" 25  
PAR- ET-  RA 0150HD 1-1/2" 25 PAR-25
PAR- ET-  RA 0200HD 2" 20 ET-10
PAR- ET-  RA 0250HD 2-1/2" 10 RA-20
PAR- ET-  RA 0300HD 3" 10 RA-15
PAR- - RA 0350HD 3-1/2" 10  
PAR- - RA 0400HD 4" 10  
PS = Pipe Size Rigid/EMT
C Max is 1/4" /20mm

Yes! I am interested
Request Callback
CADDY PW2 Clips (Beam/Purlin)

Ask For Price

CADDY PW2 Clips (Beam/Purlin)

Product Description:CADDY PW2 clips are designed for suspending services from roll lip purlins.Features

    PW2 Clip

  • Clip simply pivoted into position
  • EPZ corrosion protection

    PW2-CT Clip

  • Same general characteristics as the PW2 clip
  • For all types of cable ties with a maximum size up to 9 x 2 mm

    PW2-MA Clip

  • Same general characteristics as the PW2 clip
  • For height adjustment simply squeeze the spring steel component

    PW2-Ti/T Clips

  • Same general characteristics as the PW2 clip
  • Ti - thread impression
  • T10 - clearance holes Ø1, Ø2
  • Threaded rod form locks below purlin

    PW2-RBMX Clip

  • Same general characteristics as the PW2 clip
  • The cables are simply pushed into position
Applications
  • PW2 Clip for suspending services with chain or wire
  • PW2-CT Clip for suspending cables with polyamide cable ties
  • PW2-MA Clip for suspending services with threaded rods
  • PW2-Ti/T Clips for suspending services with threaded rods
  • PW2-RBMX Clips for installation of communications alarm, security, low voltage, data cable installations, etc.
Yes! I am interested
Request Callback
CADDY Retained Beam Clamp - Model 363 (Beam/Purlin)

Ask For Price

CADDY Retained Beam Clamp - Model 363 (Beam/Purlin)

Product Description:ERICO offers the CADDY Retained Beam Clamp - Model 363.Features
  • Steel beam clamp to fit up to 5/8" (16 mm) thick and 8" (200 mm) wide flanges
  • Can be attached to beam before installation of threaded rod or components
  • Accommodates threaded rod from 3/8" to 5/8"
  • Electrogalvanized finish for good corrosion protection
  • Available in hot dipped galvanized finish or made from stainless steel (special order)
Applications

Captures far side of flange for increased safety in industrial and seismic applications.

Catalog No. RS M C MAX
in
H
in
A
in
Coating Std Box
Qty
Lbs
3630037EG 3/8" 3/8" - 16 5/8" 2-3/4" 3-1/2" EG 25 300
3630050EG 1/2" 1/2" - 13 5/8" 2-3/4" 3-1/2 EG 20 700
3630032EG 5/8" 5/8" - 11 5/8" 2-3/4" 3-1/2" EG 15 1000
A = Flange Width
C = Flange Size
H = Fastener Height
M = Bolt Size
RS = Rod Size
Yes! I am interested
Request Callback
CADDY Retainer Strap Assemblies (Beam/Purlin)

Ask For Price

CADDY Retainer Strap Assemblies (Beam/Purlin)

Product Description:CADDY Retainer Strap Assemblies require only a hammer to install to beams. Pre-riveted assemblies are available for conduit, pipe, box, rod and other applications.Features
  • Only one piece to install
  • Fast hammer-on installation
  • Riveted restraining strap eliminates cumbersome assemblies and hardware
  • Restraining strap is easily bent into position
  • Lightweight design, heavyweight results

 

Applications

Approved for seismic applications.  California Division of State Architect Product Acceptance Number PA-003

Catalog No. Fig No. Flange Threaded Rod, Stud, or Conduit Std Box Qty
CM24S 1 1/8" - 1/4" 1/4"-20 x 3/8" stud 50
CM58S 1 5/16" - 1/2" 1/4"-20 x 3/8" stud 50
CM912S 1 9/16" - 3/4" 1/4"-20 x 3/8" stud 50
C4TI24 2 1/8" - 1/4" 1/4"-20 threaded rod 50
C4TI58 2 5/16" - 1/2" 1/4"-20 threaded rod 50
C4TI912 2 9/16" - 3/4" 1/4"-20 threaded rod 50
C6TI24 2 1/8" - 1/4" 3/8"-16 threaded rod 50
C6TI58 2 5/16" - 1/2" 3/8"-16 threaded rod 50
C6TI912 2 9/16" - 3/4" 3/8"-16 threaded rod 50
CM24812M 3 1/8" - 1/4" 1/2" & 3/4" conduit 50
CM2416M 3 1/8" - 1/4" 1" conduit 50
CM58812M 3 5/16" - 1/2" 1/2" & 3/4" conduit 50
CM5816M 3 5/16" - 1/2" 1" conduit 50
CM912812M 3 9/16" - 3/4" 1/2" & 3/4" conduit 50
CM91216M 3 9/16" - 3/4" 1" conduit 50
C24812SM 4 1/8" - 1/4" 1/2" & 3/4" conduit 50
C2416SM 4 1/8" - 1/4" 1" conduit 50
C58812SM 4 5/16" - 1/2" 1/2" & 3/4" conduit 50
C5816SM 4 5/16" - 1/2" 1" conduit 50
C912812SM 4 9/16" - 3/4" 1/2" & 3/4" conduit 50
C91216SM 4 9/16" - 3/4" 1" conduit 50
Fig. 1 Load 75 lbs.
Fig. 2 Load 200 lbs.
Fig. 3 Load 75 lbs.
Fig. 4 Load 25 lbs
Yes! I am interested
Request Callback
CADDY Reversible Beam Clamp

Ask For Price

CADDY Reversible Beam Clamp

Product Description:The CADDY Reversible Beam Clamp with Side Mounting Threads permits attachment of 1/4"-20 threaded components to the top or bottom flange of beams. Features
  • Reversible to allow installation to both top and bottom flange
  • Hardened cup point setscrew to provide secure grip on tapered sections
  • Threaded to quickly accommodate attachment of 1/4" diameter threaded rod, bridle rings and boxes from three positions – top, bottom and back
  • Heavy-duty malleable iron construction with electrogalvanized finish for added corrosion protection
Applications

Easy installation to steel members up to 3/4" (20 mm) thick.

Catalog No. RS M C MAX
in
C MAX
mm
Coating Std Box Qty Top
Lbs
Top
Kg
Bottom
Lbs
Bottom
Kg
BC260025EG 1/4"-20 1/4"-20 3/4" 20 EG 100 250 1.10 100 0.44
NOTE: Safety factor of 3.5
C = Flange Size
M = Bolt Size
RS = Rod Size
Yes! I am interested
Request Callback
CADDY Reversible Beam Clamps

Ask For Price

CADDY Reversible Beam Clamps

Product Description:CADDY Reversible Beam Clamps (Model 300 & 310) permit attachment of threaded rod (up to 5/8"-11) to top or bottom flanges (up to 1-1/4" thick). Features
  • Reversible for attachment to top or bottom flange
  • Available for threaded rod sizes (#310 Series 3/8" and 1/2" diameter) (#300 Series 3/8" to 3/4" diameter)
  • Locknut and hardened cup point set screw to provide secure grip on tapered sections
  • Malleable iron clamp with electrogalvanized finish for good corrosion protection
  • #310 Series Large mouth opening (1-1/4" [32 mm]) to fit large thick flange steel beams or angles and large lip purlins
  • Available in hot dipped galvanized finish (special order)
  • Retaining strap available separately, for more secure attachment for industrial or seismic applications.
Applications

Attaches to a wide variety of structural sections including "C" Purlins, angles, channels and beams.

Catalog No. Fig No. RS C Max
in
H
in
P
in
Std Box Qty Top
Lbs
Bottom
Lbs
3000037EG 1 3/8" - 16 3/4" 1-9/16" 13/16" 100 500 250
3000050EG 1 1/2" - 13 3/4" 1-13/16" 1-1/16" 50 950 760
3000062EG 1 5/8" - 11 3/4" 1-13/16" 1-1/16" 50 950 760
3000075EG 1 3/4" - 10 3/4" 1-3/4" 1-1/8" 50 950 760
3100037EG 2 3/8" - 16 1-1/4" 2-1/16" 13/16" 50 500 250
3100050EG 2 1/2" - 13 1-1/4" 2-3/8" 1-1/16" 50 950 760
Coating - EG
NOTE: Safety factor of 3.5.

C = Flange Size
H = Fastener Height
P = Fastener Width
RS = Rod Size

Yes! I am interested
Request Callback
CADDY Rod Hanger Beam Clamp - Model 200 (Beam/Purlin)

Ask For Price

CADDY Rod Hanger Beam Clamp - Model 200 (Beam/Purlin)

Product Description:ERICO offers the CADDY Rod Hanger Beam Clamp, Model 200. Features
  • Available for threaded rod sizes 3/8" to 1/2" diameter
  • Locknut and hardened cup point setscrew to provide secure grip on tapered sections
  • Stamped steel with electrogalvanized finish for good corrosion protection
  • Available in hot dipped galvanized finish or made from AISI 304 stainless (special order)
  • Retaining strap available separately for more secure attachment for industrial or seismic applications
Applications Rod Hanger Beam Clamp for attachment to beams or angles up to 3/4" (20 mm) thick.

Catalog No. RS M C Max
in
H
in
W
in
Coating Std Box Qty Lbs
2000037EG 3/8" - 16 3/8" - 16 3/4" 2-3/8" 2-1/4 " EG 100 250
2000050EG 1/2" - 13 1/2" - 13 3/4" 2-3/8" 2-1/4 " EG 50 760
NOTE: Safety factor of 3.5 C = Flange Size
H = Fastener Height
M = Bolt Size
RS = Rod Size

Yes! I am interested
Request Callback
CADDY SC and HK Snap Clips (Beam/Purlin)

Ask For Price

CADDY SC and HK Snap Clips (Beam/Purlin)

Product Description:The CADDY SC and HK Snap Clips are designed for installing cables or tubes with a diameter of 6-32 mm.Features

SC Snap Clip

  • For use on profiles of 1-12 mm thickness
  • EPZ corrosion plating
  • Can be installed either in horizontal or vertical position
  • The SC clips can easily be combined with SCA adaptor and SCB adaptor - SCD adaptor
  • For installations to metal sheets, see our HSC range

SCA Adaptor

  • Utilises 1, 2 or 3 snap clips, type 24SC range, all diameters
  • For flanges with a thickness of 13 up to 20 mm
  • EPZ corrosion protection
  • Can be installed either in horizontal or vertical position

SCB Dual Snap Clip Adaptor

  • Same general characteristics as the SCA adaptor
  • Utilises 24SC snap clip range
  • For profiles of 3 to 20 mm thickness
  • Can be installed either in horizontal or vertical position
  • Designed for installing 2 cables or tubes in parallel

HK Snap Clip

  • Same general characteristics as the SC range
  • For profiles of 1.5 to 11 mm thickness
  • For cables or tubes Ø 4.2 mm to 6.5 mm
  • Can be installed either in horizontal or vertical position
  • Electro zinc corrosion protection
Applications

Spring steel clips for installing cables or tubes with a diameter of 6 up to 32 mm, multi-combination snap clip adaptor, dual snap clip adaptor, spring steel clips for installing cables or tubes with a diameter of 4.2 up to 6.5 mm

Yes! I am interested
Request Callback
CADDY Strut-To-Beam System (Beam/Purlin)

Ask For Price

CADDY Strut-To-Beam System (Beam/Purlin)

Product Description:The CADDY 6000 series Strut-to-Beam System permits fast attachment of heavy equipment or service piping (up to 2000 lbs.) without drilling or welding the structural beam.Features
  • Comes assembled in single profile 1-5/8" x 1-5/8" (41 x 41mm) or double profile back to back 1-5/8" x 1-5/8" (41 x 41mm) 12 gauge
  • For beam flanges up to 1-3/8" (41 x 41mm) 12 gauge
  • Hot dipped galvanized or stainless steel (AISI 304)
  • Clamp sets available separately
ApplicationsFor fast attachment of heavy equipment or service piping (up to 2000 lbs.) without drilling or welding the structural beam.
Yes! I am interested
Request Callback
CADDY System BTF - Beam Tray Fixing (Beam/Purlin)

Ask For Price

CADDY System BTF - Beam Tray Fixing (Beam/Purlin)

Product Description:The CADDY System BTF is an ingenious combination of EM Clips and wired cable tray for securing cables along steel beams.Features
  • Standard length 1.5 metres
  • Wire cable tray electro zinc plated
  • The spring steel clips are EPZ plated
  • Available in 3 sizes for beam flanges between 3-20 mm
  • Pre-assembled kit contains 3 EM-clips complete with wire cable tray
  • Angles, steps, etc. - the BTF kit has maximum installation flexibility
  • Conveniently packed in boxes of 10 pieces, with 4 additional EM clips
  • Easy to install and handle, the BTF allows you to reduce installation time and cost
ApplicationsFor securing cables along steel beams
Yes! I am interested
Request Callback
ADDY TKE Clamp (Beam/Purlin)

Ask For Price

ADDY TKE Clamp (Beam/Purlin)

Product Description:The CADDY TKE Clamp is used for suspending services via threaded rods.Features
  • For beam flanges up to 19.5 mm thickness
  • Electro zinc plated
  • VDS, UL, and FM certification
ApplicationsFor suspending services via threaded rods up to a maximum load of 400 kg (with a safety factor of 4:1)

Description Part No. B mm Ø Protection Pack
TKEM6 386690 11 M6 1 140
TKE8 386700 16 9 mm 1 100
TKEM8 386710 16 M8 1 100
TKE10 386720 17 11 mm 1 100
TKEM10 386730 17 M10 1 100
TKE12 386740 19 13 mm 1 80
TKEM12 386750 19 M12 1 80

Yes! I am interested
Request Callback
CADDY Universal Beam Hangers (UBH & UBHT) (Beam/Purlin)

Ask For Price

CADDY Universal Beam Hangers (UBH & UBHT) (Beam/Purlin)

Product Description:CADDY Universal Beam Hangers fit most existing concrete or steel beams without the need for drilling.Features

Universal Beam Hanger (UBH)

  • Fully adjustable in height and width, no special tools required
  • For all types of beam flange up to a maximum of 500 mm width, maximum of 180 mm thickness, maximum flange angle of 40°
  • 3 thread impression holes M6 or M8
  • 2 types in 2 sizes
  • Maximum static load is 75 kg (with a safety factor of 4:1)
  • Accessories also available

Universal Beam Hanger with Cable Tray Support Arm (UBHT)

  • The characteristics and the method of installation are the same as those of the UBH
  • Available in 2 sizes
  • To secure the cable trays in place (sheet or wire) use either one or two locking clips
  • Maximum load 100 kg (ultimate)
Applications
  • UBH is a universal beam hanger that fits most existing beams, concrete or steel, without drilling
  • UBHT is designed to support cable trays, trunking or ventilation ductwork on most types of concrete or steel beams, without drilling
Yes! I am interested
Request Callback
CADDY UPC Universal Purlin Clamp (Beam/Purlin)

Ask For Price

CADDY UPC Universal Purlin Clamp (Beam/Purlin)

Product Description:The CADDY Universal Purlin Clamp (UPC) is used for the suspension of threaded rods from purlin section.Features
  • Heavy load applications - Load  NU-300 kg
  • 10 mm threaded rods
  • Clamp pivoting action ensures perpendicular suspension from purlin section
  • Compatible with most purlin sections
Applications

Universal Purlin Clamp is used for the suspension of threaded rods from purlin section

Description Part No.

Protection

Pack Load
UPC 386800 1 50 300
Yes! I am interested
Request Callback
CADDY VF/J Clips (Beam/Purlin)

Ask For Price

CADDY VF/J Clips (Beam/Purlin)

Product Description:The CADDY VF/J Clips are used for suspending services from angle section or purlins. Features

VF Clip

  • For profiles of 1.5 to 6 mm thickness
  • EPZ corrosion protection
  • Can be used in combination with CADDY HSC Snap Clips

J Clip

  • Same general characteristics as the VF clip but used for purlin or angle section with a smaller return flange >10 mm
  • Maximum purlin angle 15° from vertical
  • Can be used in combination with HSC Snap Clip

J-RBMX Clip

  • Same general characteristics as the J clip
  • The cables are simply pushed into position

J-MA Clip

  • Same general characteristics as the J clip
  • For height adjustment simply squeeze the spring steel component
  • The load rating applies to the threaded rod vertically suspended

J-Ti/T Clip

  • MTi - M6, M8 or M10 thread impression clips
  • T10 - 11 mm clearance hole for use with threaded rods up to 10 mm diameter
  • Same general characteristics as the J clip

J-CT/CTB Clip

  • Type CT are supplied without cables ties
  • Type BW are supplied with WHITE cable ties
  • Type BB are supplied with BLACK cable ties
  • Same general characteristics as the J clip
Applications
  • VF Clip - for suspending services by chain or wire
  • J Clip - used for purlin or angle section with a smaller return flange
  • J-RBMX Clip
  • J-MA Clip - for use with threaded rods
  • J-Ti/T Clip - for use with threaded rods
  • J-CT/CTB Clip - for securing cables to purlin or angle section
Yes! I am interested
Request Callback
CADDY Wide Mouth Beam Clamps

Ask For Price

CADDY Wide Mouth Beam Clamps

Product Description:CADDY Wide Mouth Beam Clamps (Models BC13 / BC14) permit quick attachment to beam flanges up to 1-5/8" thickness without drilling or welding.Features
  • BC13 (Fig 1) Heavy duty steel beam clamp to fit up to 7/8" (22mm) thick flanges
  • BC14 (Fig 2) Heavy duty steel beam clamp to fit flanges from 5/8" (16 mm) to 1-5/8" (41 mm) thick
  • Threaded to allow quick and easy attachment of threaded rod or bolted components
  • Electrogalvanized finish for good corrosion protection
  • Available in hot dipped galvanized finish (special order)
  • Retaining strap available separately for more secure attachment or seismic applications
  • Hardened cup point setscrew to provide secure grip on tapered sections
Applications Permit quick attachment to beam flanges up to 1-5/8" thickness without drilling or welding.

Catalog No. Fig No. RS M C MAX
in
Coating Std Box Qty Lbs
BC130025EG 1 1/4" - 20 3/8" - 16 7/8" EG 20 650
BC130037EG 1 3/8" - 16 3/8" - 16 7/8" EG 20 650
BC130050EG 1 1/2" - 13 1/2" - 13 7/8" EG 10 1100
BC130062EG 1 5/8" - 11 1/2" - 13 7/8" EG 10 1600
BC140037EG 2 3/8" - 16 3/8" - 16 1-5/8" EG 20 800
BC140050EG 2 1/2" - 13 1/2" - 13 1-5/8" EG 20 1300
BC140062EG 2 5/8" - 11 1/2" - 13 1-5/8" EG 10 1900
*Minimum flange thickness 5/8" (16 mm)

C = Flange Size
M = Bolt Size
RS = Rod Size


Yes! I am interested
Request Callback
CADDY PYRAMID 25 (Rooftop Pipe and Equipment Supports)

Ask For Price

CADDY PYRAMID 25 (Rooftop Pipe and Equipment Supports)

Product Description:CADDY® PYRAMID 25 Pipe & Equipment Support from ERICO® provides an easy method for supporting up to 25 lb loads of pipe, conduit and equipment. CADDY PYRAMID dramatically reduces installation time by replacing other labor-intensive support methods such as wood blocks, straps and clips.Features
  • Supports up to 25 lb loads
  • Lightweight, all-plastic construction weighs less than 1/3 lb
  • Absorbs shock and vibration
  • Protects roof membrane
  • No tools or fasteners needed for installation
  • Handles up to three 1/2” or two 3/4” or 1” pipes/conduit
  • Has a small 4” x 5” footprint
  • UV-Resistant
ApplicationsSupports equipment or multiple runs of pipe and conduit and provides for numerous mounting options and clamping positions.More Information
Part No. Description
Max Working Load (lb)
PPRPS25H4 3-5/8” high support 25
PPRPS25H6 5-5/8” high support 25
Yes! I am interested
Request Callback
CADDY PYRAMID 25 (Rooftop Pipe and Equipment Supports)

Ask For Price

CADDY PYRAMID 25 (Rooftop Pipe and Equipment Supports)

Product Description:CADDY® PYRAMID 25 Pipe & Equipment Support from ERICO® provides an easy method for supporting up to 25 lb loads of pipe, conduit and equipment. CADDY PYRAMID dramatically reduces installation time by replacing other labor-intensive support methods such as wood blocks, straps and clips.Features
  • Supports up to 25 lb loads
  • Lightweight, all-plastic construction weighs less than 1/3 lb
  • Absorbs shock and vibration
  • Protects roof membrane
  • No tools or fasteners needed for installation
  • Handles up to three 1/2” or two 3/4” or 1” pipes/conduit
  • Has a small 4” x 5” footprint
  • UV-Resistant
ApplicationsSupports equipment or multiple runs of pipe and conduit and provides for numerous mounting options and clamping positions.More Information
Part No. Description
Max Working Load (lb)
PPRPS25H4 3-5/8” high support 25
PPRPS25H6 5-5/8” high support 25
Yes! I am interested
Request Callback
CADDY PYRAMID 50 (Rooftop Pipe and Equipment Supports)

Ask For Price

CADDY PYRAMID 50 (Rooftop Pipe and Equipment Supports)

Product Description:CADDY® PYRAMID 50 Pipe & Equipment Support from ERICO® provides an easy method for supporting up to 50 lb loads of pipe, conduit and equipment. CADDY PYRAMID dramatically reduces installation time by replacing other labor-intensive support methods such as wood blocks, straps and clips.
Features
  • Supports up to 50 lb loads
  • Electro-galvanized (EG) finish provides superior corrosion protection
  • Polyethylene closed-cell foam and 16-gauge steel construction
  • Metal top designed to shed water and minimize water collection on foam base
  • Absorbs shock and vibration
  • Protects roof membrane
  • The 4” high model has a 10-3/8” x 4” footprint
  • The 6” high model has a 10-3/8” x 4-3/4” footprint
ApplicationsSupports equipment or multiple runs of pipe and conduit and provides for numerous mounting options and clamping positions.More Information
Part No. Max Working Load (lb) Height (in) Finish
RPS50H4EG 50 4 EG
RPS50H6EG 50 6 EG
Yes! I am interested
Request Callback
Rooftop Pipe and Equipment Supports

Ask For Price

Rooftop Pipe and Equipment Supports

Product Description:The CADDY® PYRAMID 50 Plenum model from ERICO® provides an easy method for supporting pipes, conduit and equipment below raised floors. CADDY PYRAMID dramatically reduces installation time by replacing other labor-intensive support methods such as wood blocks, straps and clips.Features
  • Supports up to 50 lb loads
  • CADDY® COAT Silver (SV) finish on the plenum version provides superior corrosion protection
ApplicationsSupports equipment or multiple runs of pipe and conduit and provides for numerous mounting options and clamping positions.More Information
Part No. Max Working Load (lb) Height (in) Finish
RPS50AHSV 50 2-1/4 SV
Yes! I am interested
Request Callback
CADDY PYRAMID 150 (Rooftop Pipe and Equipment Supports)

Ask For Price

CADDY PYRAMID 150 (Rooftop Pipe and Equipment Supports)

Product Description:CADDY® PYRAMID 150 Pipe & Equipment Support from ERICO® provides an easy method for supporting up to 150 lb loads of pipe, conduit and equipment. CADDY PYRAMID dramatically reduces installation time by replacing other labor-intensive support methods such as wood blocks, straps and clips.Features
  • Supports up to 150 lb loads
  • Electro-galvanized (EG) finish on top plate for added corrosion protection
  • Polyethylene closed-cell foam and 14-gauge steel construction
  • Absorbs shock and vibration
  • Protects roof membrane
  • Has six 3/8”-16 threaded inserts with captive nuts that allows the product to be used with standard pipe clamps and accessories.
  • Large 16” x 12” footprint distributes load more evenly than alternative methods
  • With or without strut. Strut length is 16".
ApplicationsSupports equipment or multiple runs of pipe and conduit and provides for numerous mounting options and clamping positions.More Information
Part No. Max Working Load (lb) Height (in) Threads Finish Strut Included?
RPS150T1 150 3-3/16 3/8"-16 EG No
RPS150T2 150 4 3/8"-16 EG Yes

Product available with other thread configurations and surface finishes.
Yes! I am interested
Request Callback
CADDY PYRAMID 300 (Rooftop Pipe and Equipment Supports)

Ask For Price

CADDY PYRAMID 300 (Rooftop Pipe and Equipment Supports)

Product Description:CADDY® PYRAMID 300 Pipe & Equipment Support from ERICO® provides an easy method for supporting up to 300 lb loads of pipe, conduit and equipment. CADDY PYRAMID dramatically reduces installation time by replacing other labor-intensive support methods such as wood blocks, straps and clips.Features
  • Supports up to 300 lb loads
  • Electro-galvanized (EG) finish on top plate for added corrosion protection
  • Crosslink polyethylene closed-cell foam supports the additional weight; 14-gauge steel top plate
  • Has six 3/8”-16 threaded inserts with captive nuts that allows the product to be used with standard pipe clamps and accessories
  • Absorbs shock and vibration
  • Protects roof membrane
  • Large 16” x 12” footprint distributes load more evenly than alternative methods
  • With or without strut. Strut length is 16".
ApplicationsSupports equipment or multiple runs of pipe and conduit and provides for numerous mounting options and clamping positions.More Information
Part No. Max Working Load (lb) Height (in) Threads Finish Strut Included?
RPS300T1 300 3-3/16 3/8"-16 EG No
RPS300T2 300 4 3/8"-16 EG Yes

Product available with other thread configurations and surface finishes.
Yes! I am interested
Request Callback
Caddy PYRAMID 600

Ask For Price

Caddy PYRAMID 600

Product Description:CADDY® PYRAMID 600 Pipe & Equipment Support from ERICO® provides an easy method for supporting up to 600 lb loads of pipe, conduit and equipment. CADDY PYRAMID dramatically reduces installation time by replacing other labor-intensive support methods such as wood blocks, straps and clips.Features
  • Supports up to 600 lb loads
  • Consists of two CADDY PYRAMID 300 bases tied together with a length of strut
  • Electro-galvanized (EG) finish on top plate for added corrosion protection
  • Crosslink polyethylene closed-cell foam supports the additional weight; 14-gauge steel top plate
  • Has twelve 3/8”-16 threaded inserts with captive nuts for maximum pipe / conduit holding
  • Absorbs shock and vibration
  • Protects roof membrane
  • Footprint is 32” x 12” (24” x 16” optional with cutting of strut) for more even load distribution
ApplicationsSupports equipment or multiple runs of pipe and conduit and provides for numerous mounting options and clamping positions.More Information
Part No. Max Working Load (lb) Height (in) Threads Finish Strut Included?
RPS600T2 600 4 3/8"-16 EG Yes

Product available with other thread configurations and surface finishes.
Yes! I am interested
Request Callback
CADDY PYRAMID Column Support

Ask For Price

CADDY PYRAMID Column Support

Product Description:CADDY® PYRAMID Pipe & Equipment Supports from ERICO® provide an easy method for supporting pipes, conduit and equipment. CADDY PYRAMID dramatically reduces installation time by replacing other labor-intensive support methods such as wood blocks, straps and clips.FeaturesColumn Supports allow attachment of rooftop equipment for air conditioning, etc., or serve as support for strut structures to attach pipes, conduits and ducts. Strut lengths are available in 16” pieces for the CADDY PYRAMID 150 and CADDY PYRAMID 300 and in 32” pieces for the CADDY PYRAMID 600. For added flexibility, strut can be cut to length on site as required.ApplicationsThere are two types of column supports available. The CADDY PYRAMID Column Support RPSCSEG attaches with two screws to the CADDY PYRAMID 50 models or to the strut on the CADDY PYRAMID 150, 300 or 600 models. The ERICO column support P11 can be mounted with four screws on top of the models CADDY PYRAMID 150 or 300 without strut. The vertical strut structures attach directly to the column support.More InformationFor more information on the ERICO column support P11, strut and other strut fittings/accessories, please review the CADDY Mechanical Hangers and Supports for Plumbing, HVAC and Fire Protection catalog.
Yes! I am interested
Request Callback
CADDY SPEED LINK Universal Support System (CADDY Speed Link)

Ask For Price

CADDY SPEED LINK Universal Support System (CADDY Speed Link)

Product Description:ERICO introduces CADDY® SPEED LINK - a universal support system guaranteed to reduce installation time. A cost-effective alternative to threaded rod, strut and strut nuts, this innovative system has the versatility to meet virtually all your support needs.Features
  • Reduces installation time
  • Quickly installs as a stand-alone hanging system for fast installation without drilling into the building structure
  • Works with a variety of CADDY Fasteners for easy installation
  • Features galvanized steel construction of the wire rope, locking device and hook, providing superior fire resistant performance
  • Reduces inventory, storage space and shipping costs with its small, lightweight design
  • Increases installation versatility - easily hang objects at a variety of angles, even from sloped ceilings
  • Allows easy adjustments of supported objects during and after installation with a unique locking device
  • Minimizes vibration and system wear and tear with strong, yet flexible wire rope 
  • Improves the aesthetics of your installations with its sleek design
Applications CADDY SPEED LINK supports a wide range of applications with maximum efficiency and minimal effort.
  • Lighting support
  • Round, oval and rectangular ductwork
  • Cable trays
  • Electrical busway
  • Pipe and tube
  • Conduit
  • Strut profiles
  • C-profiles
  • Signage from overhead building structural members
Yes! I am interested
Request Callback
CADDY SPEED LINK LD Universal Support System

Ask For Price

CADDY SPEED LINK LD Universal Support System

Product Description:

ERICO introduces CADDY® SPEED LINK LD - a universal support system that quickly suspends static loads, even at an angle.  It is a cost-effective alternative to jack chain, threaded rod and associated hardware in lighting and other installation projects.

Features
  • The 1.5 mm (0.059 inch) wire rope with a crimped-on hook holds working loads of up to 20 kg (44 lbs) with a 5:1 safety factor.
  • A small, aesthetically pleasing locking device completes the assembly. This low-profile stainless-steel device helps ensure stability and allows for additional vertical adjustment after wire insertion.  A small screwdriver releases the lock for fast installation adjustments.
  • The wire rope/hook assembly is available in galvanized steel as well as stainless steel for applications where a higher level of corrosion resistance is required.
  • The system installs without drilling or tools and allows objects to be hung at an angle-e.g., from sloped ceilings.
  • A new universal toggle and Y-toggle makes lighting and overhead decking installation even easier.
  • For overhead decking applications, the universal toggle/wire rope assembly is identical to standard CADDY SPEED LINK LD, except the hook is replaced with a toggle.     
  • The optional Y-toggle consists of two 500 mm (20 in.) or 800 mm (31 in.) lengths of wire rope with a toggle on each end. The center of the wire rope is looped and crimped. It is ideal as a support or safety wire for lighting fixtures.
  • CADDY SPEED LINK LD is available in 2 m (6.6 ft), 5 m (16.4 ft) and 10 m (32.8 ft) lengths.
  • It works with a variety of CADDY® Fasteners including beam clamps and purlin clips or can be looped directly around the beam.
  • A convenient plastic sleeve keeps the wire rope looped up until the contractor is ready to install.
  • An optional extension tool allows CADDY SPEED LINK LD to be installed from the ground.
Applications
  • Lighting support
  • Speakers
  • Sensors
  • Signage for overhead building structural members
  • Overhead decking
Yes! I am interested
Request Callback
Concrete Eyebolt Screw (CADDY Speed Link)

Ask For Price

Concrete Eyebolt Screw (CADDY Speed Link)

Product Description:ERICO® has simplified the process of suspending electrical and mechanical devices from concrete and/or masonry structures with the Concrete Eyebolt Screw. This time-saving product requires only a drilling machine capable of drilling concrete and a 5 mm diameter bit, eliminating the need for heavy, noisy and expensive equipment, such as power actuated tools.

Any standard drill can be used to attach the Concrete Eyebolt Screw into concrete or masonry, making installation quick and easy. Simply drill a 5 mm hole, 45 mm deep, with a standard bit, add the adapter and a Concrete Eyebolt Screw to the drill and then screw it into the hole. Once installed, the Concrete Eyebolt Screw is stable, secure and easy to remove.

The Concrete Eyebolt Screw has a working load rating of 700 N and is an ideal way to attach CADDY® SPEED LINK wire rope hanging systems, chain or hooks.
Features
  • Allows direct connection of eyebolt screws into concrete and/or
    masonry using only a 5 mm drill and an adapter (included)
  • Is ideal for suspending hanging systems from concrete ceilings
  • Has a maximum working load rating of 700 N
  • Saves time and money over alternative methods
  • Provides quick and easy installation
Applications A simple and effective way to suspend electrical and mechanical devices from concrete and/or masonry structures.

Article No.
Part No.
Description
Qty. Per Box
195864
CFEB05
Concrete Eyebolt Screw
100

Yes! I am interested
Request Callback
CADDY EMT Conduit Clip (Ceiling/Partitions)

Ask For Price

CADDY EMT Conduit Clip (Ceiling/Partitions)

Product Description:ERICO offers the CADDY EMT Conduit Clip.Features
  • For use as hold-down of 1/2", 3/4", 1", 1-1/4" thin wall conduit to 1-1/2" lathers channel
  • No installation tools required
Applications

For use as hold-down of thin wall conduit to lathers channel.

Catalog No. Conduit Size Std Box Qty
8D1.5L 1/2" EMT conduit 100
12D1.5L 3/4" EMT conduit 100
16D1.5L 1" EMT conduit 100
20D1.5L 1-1/4" EMT conduit 100
Static load limit 50 lbs. (When conduit hangs below lathers channel.)
Yes! I am interested
Request Callback
CADDY Lathers Channel Box Mount (Ceiling/Partitions)

Ask For Price

CADDY Lathers Channel Box Mount (Ceiling/Partitions)

Product Description:ERICO offers the CADDY Lathers Channel Box Mount.Features
  • Provides attachment of conduit and outlet boxes directly to lathers channel with 1/4"-20 x 3/4" screw furnished
  • Can be applied to the top or bottom flange of the channel
  • Fits most lathers channel 3/4", 1-1/2 " and 2", maximum flange width 5/8"</UL
Applications

Provides attachment of conduit and outlet boxes directly to lathers channel.

Catalog No. Description Std Box Qty
4LCB Lathers channel box mount 100
UL & cUL Listed
No Load Rating - Positioning Only
Yes! I am interested
Request Callback
CADDY Lathers Channel Hanger (Ceiling/Partitions)

Ask For Price

CADDY Lathers Channel Hanger (Ceiling/Partitions)

Product Description:ERICO offers the CADDY Lathers Channel Hanger.Features
  • Attaches 1-1/2" lathers channel to #8 wire, 1/4" plain rod
  • Attaches 2" lathers channel to 1/4" plain rod
  • Available in both center and sidemount for 1/4" rod
  • Will fit channel flange widths 7/16" thru 5/8"
  • No installation tools required
Applications

Provides pre-leveling of channel.

Fig 1
Catalog No.
Fig 2
Catalog No.
Size Std Box Qty
Wire or Rod Lathers Channel
2B1.5LS* #8 1-1/2" channel 100
4B1.4LS 4B1.5L 1/4" plain rod 1-1/2" channel 100
4B2LS 1/4" plain rod 2" channel 100
* Cannot be used on #9 wire.
Static load limit 160 lbs.
Yes! I am interested
Request Callback
CADDY Lathers Channel Hanger (Ceiling/Partitions)

Ask For Price

CADDY Lathers Channel Hanger (Ceiling/Partitions)

Product Description:ERICO offers the CADDY Lathers Channel Hanger.Features
  • Provides a method for attaching 1-1/2" channel to existing #8 wire, #9 wire, 3/16" or 1/4" plain rod, or 1/8"-3/16" x 1" wide strap
  • No installation tools required
Applications

Eliminates the major problem of cutouts for lighting layouts, ducts, obstructions and architectural changes.

Catalog No. Lathers Channel
Flange Width
Supporting Member Static Load Limit Std Box Qty
HRL1.5A 9/16" to 5/8" #9 and #8 wire, 3/16" and 1/4" plain rod 100 lbs. 100
1/8" and 3/16" thick strap 75 lbs. 100
Yes! I am interested
Request Callback
CADDY Lathers To T-Grid Hanger Clip (Ceiling/Partitions)

Ask For Price

CADDY Lathers To T-Grid Hanger Clip (Ceiling/Partitions)

Product Description:ERICO offers the CADDY Lathers to T-Grid Hanger Clip.Features
  • Allows 6" drop space providing area for light fixtures
  • Installs quickly and easily
Applications

Fits 1-1/2" channel with flange widths from 1/2" to 5/8".

Catalog No. Description Std Box Qty
LTGH Provides 6" space in supporting acoustical tee from 1-1/2" lathers channel 100
Yes! I am interested
Request Callback
CADDY Lock-On Twist Clip (Ceiling/Partitions)

Ask For Price

CADDY Lock-On Twist Clip (Ceiling/Partitions)

Product Description:ERICO offers the CADDY Lock-On Twist Clip. Features
  • Attaches easily to tee bar
  • Doesn’t harm acoustical tee
  • Fits 15/16" tee bar
  • Provides "positive lock" to position fastener
Applications

For attaching to tee bar

Catalog No. Description Std Box Qty
PT16 Lock-on twist clip for 15/16", tee 3/4" stud 100
PT16FP With felt pad 100
PT16SPCR Plastic spacer for PT16 100
Static load limit 50 lbs.
Yes! I am interested
Request Callback
CADDY Support Box From Lathers Channel (Ceiling/Partitions)

Ask For Price

CADDY Support Box From Lathers Channel (Ceiling/Partitions)

Product Description:ERICO offers the CADDY Support Box from Lathers Channel.Features
  • Provides a convenient new method of supporting an electrical box from 3/4" thru 2" lathers channel
  • CADDY “one piece/two piece” construction eliminates loose parts to drop
  • Built-in thread impressions eliminate the need for nuts
  • Multiple pre-punched holes allow for box height adjustability and screw and nut are provided
Applications

Provides a convenient new method of supporting an electrical box from 3/4" thru 2" lathers channel

Catalog No. Lathers Channel Size Std Box Qty
LCSB12 3/4", 1", 1-1/2" or 2" 50
No Load Rating - Positioning Only
Yes! I am interested
Request Callback
CADDY Cable Snap Clip (Conduit/Cable)

Ask For Price

CADDY Cable Snap Clip (Conduit/Cable)

Product Description:CADDY Snap Clips attach cable to beams without tools within seconds.Features
  • Supports cable from 1/16"-1/2" flange
  • Works effectively with MC and AC cable dimensions 3/8" - 1-1/4" and low voltage cables from 7/32" and up
  • Clip "snaps" on flange and cable "snaps" into clip - this is "snappy"
Applications

CADDY Snap Clips attach to beams and cable with just a snap - no tools needed.

Catalog NumberCable O.D.DescriptionStd Box Qty
SC2A.218-.281Low voltage, data and MC/AC
cable to 1/16" thru 3/16"
flange thickness
100
SC2B.312-.375100
SC2C.375-.437100
SC2D.468-.562100
SC2E.500-.718100
SC2F.750-.937100
SC2G.968-1.250100
SC4A.218-.281Low voltage, data and MC/AC
cable to 3/16" thru 9/32"
flange thickness
100
SC4B.312-.375100
SC4C.375-.437100
SC4D.468-.562100
SC4E.500-.718100
SC4F.750-.937100
SC4G.968-1.250100
SC8A.218-.281Low voltage, data and MC/AC
cable to 5/16" thru 1/2"
flange thickness
100
SC8B.312-.375100
SC8C.375-.437100
SC8D.468-.562100
SC8E.500-.718100
SC8F.750-.937100
SC8G.968-1.250100
Yes! I am interested
Request Callback
CADDY Cable/Conduit From Drop Wire Support (Conduit/Cable)

Ask For Price

CADDY Cable/Conduit From Drop Wire Support (Conduit/Cable)

Product Description:A better mousetrap compared to the original CADDY "Batwings".Features
  • Supports cable and conduit without bending drop wire
  • Delivers 25% faster installation
  • Eliminates the need to trap cable/conduit against drop wire

NOTE: May require dedicated drop wire/rod and CADDY EC311 Securing Clip – Consult local authority.

Applications

The PCS series clips pinch-on the drop wire/rod and accept flexible conduit or EMT.

Catalog No. Fig No. Description Std Box Qty
PCS1 1 Flexible cable support from #8-#12 drop wire for MC/AC 14-2 through 12-3 with ground up to .600 O.D. 100
PCS2 2 Conduit/cable support from #8-#12 drop wire for 1/2" and 3/4" EMT, MC/AC up to .900 O.D. 100
Yes! I am interested
Request Callback
CADDY Combination Push-in Wall Clips WC812 (Conduit/Cable)

Ask For Price

CADDY Combination Push-in Wall Clips WC812 (Conduit/Cable)

Product Description:ERICO offers the WC812 Combination Push-in Wall Clips.Features
  • Quickly attaches pipe, conduit, MC/AC and tube to wall surfaces
  • Just push in - there’s no need to close the clip
  • Eliminates the need to stock multiple products
  • Lightweight, one-piece design
  • Standoff design eliminates conduit bending
  • Provides automatic alignment with electrical box knockouts
  • Low-profile design eliminates snag potential
  • Secure with powder-actuated tools, self-tapping concrete anchors or screw guns
ApplicationsWC812 is ideal for use with the CADDY Screw Gun Bracket (SGB/TSGB series) for supporting conduit between studs (no offset bending required and no drywall bulging).More InformationWC812 - Combination Push-in Wall Clip (100 per box)
  • 1/2" and 3/4" EMT conduit
  • 1/2" Rigid, IMC, PVC SCH 40
  • 5/8" and 3/4" Copper tube
  • MC/AC .700 - .925 O.D.
Yes! I am interested
Request Callback
Conduit Hangers From Drop Wire/Rod And Beam

Ask For Price

Conduit Hangers From Drop Wire/Rod And Beam

Product Description:The B18 Series means one assembly supports the box and conduit combination for quick and efficient code compliance.Features
  • One riveted assembly
  • No conduit bends (beam application)
  • 66% less Drop Wires (rod/wire application)
  • Delivers with NEC & CEC compliance, refer to the 2002 CADDY Code Compliance Book
  • Hammer-on (beams), Pinch-on (rod/wire), or Finger-close (conduit)

NOTE:  May require dedicated drop wire/rod and CADDY EC311 Securing Clip – consult local authority.

Applications
  • For single and multiple runs of conduit
  • B18 series - Combo Box & 1/2" & 3/4" conduit from #12 wire thru 1/4" rod
  • B18CO now available to support multiple runs

Yes! I am interested
Request Callback
CADDY Conduit Clamps with Bolts (Conduit/Cable)

Ask For Price

CADDY Conduit Clamps with Bolts (Conduit/Cable)

Product Description:ERICO offers CADDY Conduit Clamps with Bolts.Features
  • Fast and easy installation – installs with screwdriver or nut driver
  • Accommodates 1/2" thru 4" EMT or rigid conduit
  • Mounting hole size CD0 thru CD3 for 1/4" bolt. CD4 thru CD9 for 5/16" bolt. Available in 3/8" mounting hole for 1/2"-2" pipe. To order add suffix 37 (ie. CD2B37).
  • Retained bolt and built-in nut means there are less parts to handle or drop
  • Bright zinc finish
  • Also available in stainless steel 302 - contact factory for price and delivery, to order add suffix SS (ie. CD2B-SS). Stainless do not have nutless feature.  
Applications

Can be used in all locations where EMT or rigid conduit is used.

Catalog No. Fig No. Rigid Conduit Size
EMT
Std Box Qty
CD0B* 1 1/2" 1/2" 100
CD1B* 1 3/4" 3/4" 100
CD2B* 1 1 1 100
CD2.5B* 1 1-1/4" 100
CD3B* 1 1-1/4" 1-1/2" 100
CD4B* 1 1-1/2" 50
CD5B* 1 2 2 50
CD6B 2 2-1/2" 2-1/2" 25
CD7B 2 3 3 25
CD8B 2 3-1/2" 3-1/2" 10
CD9B 2 4 4 10
* Manufactured with retained bolt and built-in nut
Yes! I am interested
Request Callback
CADDY Conduit Clips (Conduit/Cable)

Ask For Price

CADDY Conduit Clips (Conduit/Cable)

Product Description:ERICO offers the CADDY Conduit Clips.Features
  • Can be used with Beam Clamps for both vertical and horizontal installation of conduit
  • Available with either a plain hole for 1/4" bolt or a 1/4"-20 thread impression
  • Clips have new finger close capability - 6M redesigned to work better with MC & AC cable
Applications

Available for 3/8" thru 2" EMT, rigid and aluminum conduit.

Catalog No. Fig No. Conduit Size Mounting Hole Std Box Qty
6M 1 For 6M 14-2 thru 12-3 MC/AC and 3/8" Flexible Conduit 9/32" Plain 100
812M 1 1/2" to 3/4" 9/32" Plain 100
16M 1 1" 9/32" Plain 100
20M 1 1-1/4" 9/32" Plain 100
24M 1 1-1/2" 9/32" Plain 100
32M 1 2" 9/32" Plain 100
812M4I 1 1/2" to 3/4" 1/4"-20 Thread Impression 100
6M4I 1 For 6M 14-2 thru 12-3 MC/AC and 3/8" Flexible Conduit 1/4"-20 Thread Impression 100
16M4I 1 1" 1/4"-20 Thread Impression 100
20M4I 1 1-1/4" 1/4"-20 Thread Impression 100
24M4I 1 1-1/2" 1/4"-20 Thread Impression 100
32M4I 1 2" 1/4"-20 Thread Impression 100
8P 2 1/2" 9/32" Plain 100
12P 2 3/4" 9/32" Plain 100
16P 2 1" 9/32" Plain 100
8P4I 2 1/2" 1/4"-20 Thread Impression 100
12P4I 2 3/4" 1/4"-20 Thread Impression 100
16P4I 2 1" 1/4"-20 Thread Impression 100

Load:
M Series 100 lbs. Vertical; 25 lbs. Horizontal
P Series 25 lbs. Vertical; 15 lbs. Horizontal
Yes! I am interested
Request Callback
CADDY Conduit Hangers

Ask For Price

CADDY Conduit Hangers

Product Description:ERICO offers CADDY Conduit Hangers from Flange, Wire or Rod.Features
  • Conduit support to rods or flanges
  • Can be used for flexible metallic tubing, armored cable, portable cables, control tubes, communications cable, etc.
  • No installation tools required

NOTE: May require dedicated drop wire/rod and EC311 – consult local authority

Applications

Supports conduit (EMT, Rigid, ENT, MC/AC and Aluminum) to rods (horizonal application only) or flanges.

Conduit #10 & #12 Wire #8 & #9 Wire 3/16" & 1/4" Rod 1/8"-1/4" Flange 5/16"-3/8" Flange 7/16"-1/2" Flange
1/2" EMT K8 K8 K8 K8 K12 K12
1/2" Rigid K8 K12 K12 K12 K12 K16
3/4" EMT K12 K12 K12 K12 K16 K16
3/4" Rigid K12 K12 K16 K16 K20* K20*
1" EMT K16 K16 K16 K20* K20*
1" Rigid K20* K20* K20*
1-1/4" EMT K20 K20 K20
* For horizontal application only
"K" Series packaged 100 per box

 

  Wire Sizes  
Cable Size #12 #10, #9, #8 Std Box Qty
14-2 (.433-.475 O.D.) KX KX 100
4-3 (.453-.500 O.D.) KX KX 100
12-2 (.467-.510 O.D.) KX KX 100
12-3 (.489-.535 O.D.) KX K8 100
Yes! I am interested
Request Callback
CADDY Conduit To Conduit (Conduit/Cable)

Ask For Price

CADDY Conduit To Conduit (Conduit/Cable)

Product Description:Quickly support a raceway with scrap conduit and pre-riveted CADDY P-series (push-in style) back-to-back conduit clips.Features
  • Requires no tools to install
  • Ideal as spacer between same or different size conduit
Applications

Available for conduit 1/2" to 1" EMT and 1/2" to 3/4" Rigid.

Catalog No. Conduit Size* Std Box Qty
8P8P 1/2" to 1/2" 100
8P12P 1/2" to 3/4" 100
8P16P 1/2" to 1" 50
12P12P 3/4" to 3/4" 100
12P16P 3/4" to 1" 100
16P16P 1" to 1" 50
*EMT. For Rigid conduit use next larger size clip (1/2" Rigid use 12P)
Yes! I am interested
Request Callback
CADDY Flange Mount Conduit Clip - Push-In (Conduit/Cable)

Ask For Price

CADDY Flange Mount Conduit Clip - Push-In (Conduit/Cable)

Product Description:ERICO offers the CADDY Flange Mount Conduit Clip - Push-In.Features
  • Available with CADDY Conduit Clip bottom mounted or side mounted
  • Requires only hammer to install
  • Will pivot thru 360°
NOTE: When using rigid conduit on P series, use next size larger clip (1/2" Rigid use 12P)Applications

Available for 1/2" thru 1" EMT, rigid and aluminum conduit.

Catalog No. Fig 2
Catalog No.
Description Std Box Qty
8P24 8P24SM 1/2" conduit to 1/8" to 1/4" flanges 100
8P58 8P58SM 1/2" conduit to 5/16" to 1/2" flanges 100
8P912 8P912SM 1/2" conduit to 9/16" to 3/4" flanges 100
12P24 12P24SM 3/4" conduit to 1/8" to 1/4" flanges 100
12P58 12P58SM 3/4" conduit to 5/16" to 1/2" flanges 100
12P912 12P912SM 3/4" conduit to 9/16" to 3/4" flanges 100
16P24 16P24SM 1" conduit to 1/8" to 1/4" flanges 100
16P58 16P58SM 1" conduit to 5/16" to 1/2" flanges 100
16P912 16P912SM 1" conduit to 9/16" to 3/4" flanges 50
Yes! I am interested
Request Callback
CADDY Flange Mount Conduit Clip - Snap Close (Conduit/Cable)

Ask For Price

CADDY Flange Mount Conduit Clip - Snap Close (Conduit/Cable)

Product Description:ERICO offers the CADDY Flange Mount Conduit Clip. Features
  • Available with CADDY Conduit Clip bottom mounted or side mounted
  • Requires only hammer and pliers to install
  • Will pivot through 360°
Applications

Available for 3/8" thru 2" EMT, rigid and aluminum conduit.

Fig 1
Catalog No.
Fig 2
Catalog No.
Description Std Box Qty
6M24 6M24SM 3/8" MC/AC cable to 1/8" to 1/4" flanges 100
6M58 6M58SM 3/8" MC/AC cable to 5/16" to 1/2" flanges 100
6M912 6M912SM 3/8" MC/AC cable to 9/16" to 3/4" flanges 100
812M24 812M24SM 1/2" to 3/4" conduit to 1/8" to 1/4" flanges 100
812M58 812M58SM 1/2" to 3/4" conduit to 5/16" to 1/2" flanges 100
812M912 812M912SM 1/2" to 3/4" conduit to 9/16" to 3/4" flanges 100
16M24 16M24SM 1" conduit to 1/8" to 1/4" flanges 100
16M58 16M58SM 1" conduit to 5/16" to 1/2" flanges 100
16M912 16M912SM 1" conduit to 9/16" to 3/4" flanges 100
20M24 20M24SM 1 1/4" conduit to 1/8" to 1/4" flanges 100
20M58 20M58SM 1 1/4" conduit to 5/16" to 1/2" flanges 100
20M912 20M912SM 1 1/4" conduit to 9/16" to 3/4" flanges 50
24M24 24M24SM 1 1/2" conduit to 1/8" to 1/4" flanges 50
24M58 24M58SM 1 1/2" conduit to 5/16" to 1/2" flanges 50
24M912 24M912SM 1 1/2" conduit to 9/16" to 3/4" flanges 50
32M24 32M24SM 2" conduit to 1/8" to 1/4" flanges 50
32M58 32M58SM 2" conduit to 5/16" to 1/2" flanges 50
32M912 32M912SM 2" conduit to 9/16" to 3/4" flanges 50
Fig. 1 Load 75 lbs.
Fig. 2 Load 25 lbs.
Yes! I am interested
Request Callback
CADDY Flexible Conduit And Cable Hanger (Conduit/Cable)

Ask For Price

CADDY Flexible Conduit And Cable Hanger (Conduit/Cable)

Product Description:Erico offers the CADDY WMX series Flexible Conduit and Cable Hangers. Features
  • Bundle runs of MC or AC or communications cables
  • Can be used with all flange clips or deck clip DH2 - also AO or AB, VF14, AF14, 122-123
NOTE:  Refer to local authorities and NEC Article 310 for derating ampacity when flexible power cables are used. Applications The CADDY WMX series Flexible Conduit and Cable Hanger supports bundles from a variety of structures when used with other CADDY fasteners.

Catalog No. Fig No. Number of Runs
of MC/AC Cable That
May Be Supported
"A" Dimension Ultimate
Static Load Rating
Std Box Qty
WMX3 1 3 1-1/8" 50# 100
WMX6 2 6 1-3/4" 75# 100

Yes! I am interested
Request Callback
CADDY HSC Snap Clip (Conduit/Cable)

Ask For Price

CADDY HSC Snap Clip (Conduit/Cable)

Product Description:The CADDY HSC Snap Clip is used for attaching conduits, etc, to roof decking, etc.Features
  • Secured into 7 mm pre-drilled hole
  • Profile thickness 0.7 to 1.5 mm
  • 6 to 32 mm diameters tubes
  • EPZ corrosion protection
  • Can be used in combination with various other CADDY clips including:
    • 122 Clip
    • AF Clip
    • C-Clamp
    • EBC Clamp
    • EER Clip 
    • EM Clip 
    • GTD Clip
    • H Clip
    • LRB Clip
    • OCDC Clip
    • PCSI Clip
    • TDH Clip
    • VF and J Clips
    • VKR Clip
    • WDC Clip
ApplicationsThe CADDY HSC Snap Clip is used for attaching conduits, tubes and cables to roof decking, metallic sheets, etc.More Information
Description Part No. Ø mm Protection Pack Ø tubes i.R.O
HSC67 186000 6-7 1 (4) 100 -
HSC78 187740 7-8 1 (4) 100 -
HSC89 186010 8-9 1 (4) 100 -
HSC910 187780 9-10 1 (4) 100 -
HSC1011 186020 10-11 1 (4) 100 -
HSC1214 186030 12-14 1 (4) 100 -
HSC1518 186040 15-18 1 (4) 100 16
HSC1924 186050 19-24 1 (4) 100 20
HSC2530 186060 25-32 1 (4) 100 25-32
Yes! I am interested
Request Callback
CADDY Lightweight Trapeze (Conduit/Cable)

Ask For Price

CADDY Lightweight Trapeze (Conduit/Cable)

Product Description:

ERICO offers CADDY Lightweight Trapeze.

Features
  • Fast, easy assembly for lightweight loads up to 100 lbs
  • Use with 3/8" MC/AC to 2" conduit
  • No screws or bolts
Applications

Quickly build a lightweight trapeze out of scrap 1" EMT conduit and pre-riveted CADDY M-series back-to-back conduit clips.

Catalog No. Description Std Box Qty
166M 14-2 thru 12-3 MC/AC to 1" EMT 100
16812M 1/2" or 3/4" Conduit to 1" EMT 100
1616M 1" Conduit to 1" EMT 100
1620M 1-1/4" Conduit to 1" EMT 50
1624M 1-1/2" Conduit to 1" EMT 50
1632M 2" Conduit to 1" EMT 50
Total load of trapeze must not exceed 100 lbs.
Yes! I am interested
Request Callback
CADDY LINIAN Clip (Conduit/Cable)

Ask For Price

CADDY LINIAN Clip (Conduit/Cable)

Product Description:The CADDY® LINIAN Clip is a time-saving alternative for installing fire-resistant cables on brickwork, concrete, masonry, wood studs and wood beams. The CADDY LINIAN Clip is coloured red to be compatible with red-coloured insulated fire-resistant cables. The conventional method of attaching cable to wall surfaces involves anchoring a clip into a fixing hole and tightening down the screw prior to hanging the cable, which can be quite time consuming. The CADDY LINIAN Clip easily fixes cable by simply drilling a hole, positioning the clip around the cable, compressing the clip’s legs and pushing the clip into the hole. After the hole is drilled, no tools are needed for installation, which reduces installation time by up to 70% over conventional installation methods.

Friction securely holds the clip in place. An independent third party subjected the clips to a tensile strength test and found that it took 107 N average force to pull out the clip.

The CADDY LINIAN Clip features spring steel construction with a corrosion-resistant coating applied. Spring steel is lightweight, durable and withstands temperatures up to 510°C. The coating enables the clip to withstand the ASTM®-B117-9 500-hour salt spray test. The clip also complies with BS6853: D8.3 1999 – precautions in the design and construction of passenger-carrying trains; London Underground Limited standard 2-01001-001 Section 5.2.3 – Toxic Fume Emission Requirements; and BS5839-1:2002 Clause 26.2 for standard fire-resistant cables.
Features
  • Easily fixes fire-resistant cables to brickwork, concrete, masonry, wood studs and wood beams
  • Installs up to 70% faster than saddle clips
  • After the hole is drilled, no tools are required for installation
  • Independently tested to resist tensile loads of up to 107 N
  • Corrosion-resistant coating
Applications The CADDY® LINIAN Clip is a time-saving alternative for installing fire-resistant cables on brickwork, concrete, masonry, wood studs and wood beams.


Article
Number
Description
Product
Family
Box
Qty
Hole
Diameter
Recommended
Hole Depth
LI1
179055
CADDY LINIAN Clip, red, for cable 6 – 8 mm
MO
100
6 mm
40 mm
LI2 179056
CADDY LINIAN Clip, red, for cable 9 – 11 mm
MO
100
6 mm
40 mm

ASTM is a registered trademark of ASTM International.


Yes! I am interested
Request Callback
CADDY MC/AC Cable To Metal Stud (Conduit/Cable)

Ask For Price

CADDY MC/AC Cable To Metal Stud (Conduit/Cable)

Product Description:

Erico offers CADDY MC/AC Cable to Metal Stud.

Features
  • Attaches MC or AC cable to metal stud easily
  • Requires no special tools
  • Provides fast installation
Applications

CADDY #449 snaps onto metal stud and MC/AC cable snaps into the clip.

CatalogNumberCableStd BoxQty
44914-2 (.433-.475 O.D.)100
44914-3 (.453-.500 O.D.)100
44912-2 (.467-.510 O.D.)100
44912-3 (.489-.535 O.D.)100
No Load Rating - Positioning Only
Yes! I am interested
Request Callback
CADDY MCS Series Support Bracket

Ask For Price

CADDY MCS Series Support Bracket

Product Description:The MCS Series Support Bracket neatly isolates, supports and secures MC/AC cables.Features
  • Properly spaces MC/AC cable to eliminate bundling and NEC derating issues (NEC 310.15)
  • Results in a "neat and workman-like" installation
  • Reduces inventory
  • Holds up to eight MC/AC cables, eliminating numerous one-hole straps
  • UL Listed and meets requirements of proposed UL Standard 2239 for support of conduit and cable
  • Pre-riveted assemblies allow for attachment to virtually any building structure
  • Pre-riveted assemblies available for beams, purlins and drop rod/wire
ApplicationsThe MCS Series Support Bracket neatly isolates, supports and secures MC/AC cables.
Yes! I am interested
Request Callback
CADDY Metal Deck Conduit Support

Ask For Price

CADDY Metal Deck Conduit Support

Product Description:CADDY AOL series Metal Deck Conduit Support offers "push-in" installation of conduit and eliminates offset bending.Features
  • Provides spacing between conduit and deck surface
  • Easily attached with screw gun or power tool
Applications

Permits conduit to be laid out and then attached

Catalog No. Description Std Box Qty
AOL8P Support bracket for 1/2" EMT 100
AOL12P Support bracket for 3/4" EMT or 1/2" Rigid 100
AOL16P Support bracket for 1" EMT or 3/4" Rigid 100
Yes! I am interested
Request Callback
CADDY Multi-Function Clip for Drop Wire or Flange

Ask For Price

CADDY Multi-Function Clip for Drop Wire or Flange

Product Description:ERICO offers the CADDY Multi-Funtion Clip from Drop Wire or Flange.Features
  • Attaches to #12 wire thru 3/8" rod
  • Fits 1/8" to 3/8" flanges
  • Provides attachment of conduit and boxes
  • Supports #10-24 and 1/4"-20 threaded bridle rings

 

Applications

Eliminates offset bending conduit

NOTE:  May require dedicated drop wire/rod and EC311– consult local authority.

Catalog No. Fig No. Description Wire Size Flange Size Std Box Qty 

4Z34*

1 Multi-function clip #12 wire thru 1/4" plain rod 1/8"-3/8" 100

4Z34812M*

2 Multi-plus 1/2" or 3/4" conduit #12 wire thru 1/4" plain rod 1/8"-3/8" 100

4Z3416M*

2 Multi-plus 1" conduit #12 wire thru 1/4" plain rod 1/8"-3/8" 100

4Z348P*

3 Multi-plus 1/2" EMT conduit #12 wire thru 1/4" plain rod 1/8"-3/8" 100

4Z3412P*

3 Multi-plus 3/4" EMT conduit #12 wire thru 1/4" plain rod 1/8"-3/8" 100

4Z3416P*

3 Multi-plus 1" EMT conduit #12 wire thru 1/4" plain rod 1/8"-3/8" 100

6Z34

1 Multi-function clip 3/8" plain or threaded rod 3/8"-7/16" 100

6Z34812M

2 Multi-plus 1/2" or 3/4" conduit 3/8" plain or threaded rod 3/8"-7/16" 100

6Z3416M

2 Multi-plus 1" conduit 3/8" plain or threaded rod 3/8"-7/16" 100

6Z348P

3 Multi-plus 1/2" EMT conduit 3/8" plain or threaded rod 3/8"-7/16" 100

6Z3412P

3 Multi-plus 3/4" EMT conduit 3/8" plain or threaded rod 3/8"-7/16" 100
Yes! I am interested