Espee Electricals
Thane, Maharashtra
Home»Our Products»

Electrical Test Kits

Electrical test kit is specially designed for the professionals. We have innovative and portable instruments with unique combination of features that make them highly useful and convenient at very affordable range of prices. Our electrical test kit includes: 3 Phase Relay Test Kit, Dual type relay test kit, Relay test kit, Auxillary relay test kit, Primary current injection test kit and high voltage test kit.


Oil BDV Test Set

We also offer our clients the Oil BDV Test Set. The technical specifications are as follows:

  • Input Voltage – 230 VAC
  • Output - 0 TO 60 KV/ 80 KV
  • Volt meter - Shows KV Voltage
  • Trip reading hold on for 10 to 20 sec.
  • 10 mm acrylic oil cup 1 ltr. oil capacity
  • Door lock protection
  • Audible Buzzer at trip condition
  • HV on- off trip indication
  • On – Off reset facility

Automatic Oil BDV Test Set

Automatic Oil BDV Test Set
Automatic Oil BDV Test Set

We also offer our clients the Automatic Oil BDV Test Set.

The technical specifications are as follows:-

  • Input Voltage – 230 VAC
  • Output - 0 TO 60 KV/ 80 KV
  • Volt meter - Shows KV Voltage
  • Trip reading hold on for 10 to 20 sec.
  • 10 mm acrylic oil cup 1 ltr. oil capacity
  • Door lock protection
  • Audible Buzzer at trip condition
  • HV on- off trip indication
  • On – Off reset facility

Relay Test Kit

We also offer clients Relay Test Kits with external current meter facility with a current range from 1mA to 100 mA. These test kits can work on AC and DC voltage and are easy to handle. The specifications of our test kits are as follows:

  • In put voltage: 230 V AC 50Hz
  • Out put voltage: 10 V/100 A, 100 V/1A
  • 0 to 250 VAC, 0 to 300 VDC dimer 1
  • 0 to 250 VAC, 0 to 300 VDC / set current dimer 2
  • Timer range 9.999, 99.99, 999.9, 9999 sec range /reset switch
  • External current meter calibration facility
  • Indicator on - off Push button
  • Timer range reset facility
  • Fixed 110 VDC /current range 1 mA to 100 A fine accuracy
  • Time voltage & current source available
  • Easy carry on anywhere test kit fixed in travel bag
  • Testing probe supplied with kit
  • Select & Switch Voltage AC-DC / Current

Specification

  • Out put: two separate dimmer
  • D1 set current: 0 to 10V/100A, 0 to 100V / 10A, 0 to 10V/ 5A
  • D1 set voltage: 0 to 250V AC
  • 0 to 300V DC
  • 110V AC fixed

D2 set voltage:

  • 0 to 250V AC
  • 0 to 300V DC
  • 110V DC fixed
  • 230V AC fixed

3 Phase Relay Test Kit

3 Phase Relay Test Kit
3 Phase Relay Test Kit

We also offer three phase relay test kit which is capable of showing the separate current for every phase and can operate with both DC and AC current. The specifications of our three phase test kit is as follows:

  • Input voltage 415v 3 phase neutral
  • Output R Y B phase 3V/50 Amp, 6V/25 Amp with neutral common
  • Shows separate current per phase
  • 110 VAC fixed 3 phase / 415 V variable RYB n
  • 110 VDC fixed / 0 to 300 V variable
  • N/o N/c potential free contact
  • External current meter calibration facility
  • Timer range 9.999/99.99/999.9/9999 pick up / drop up relay time
  • Auxiliary indication cont./ start stop indicator push button
  • Set voltage & current separate dimer RYB

Input voltage: 415VAC, 50HZ

Output Voltage:

  • 0-415 VAC phase to phase with respective Neutral 0-230 VAC
  • 0-230 VAC
  • 0-300 VDC
  • 110 VAC fixed +5%
  • 110 VDC fixed +5%

Output load voltage: R Phase

  • 0 to 100V/0-5 Amp +5%
  • 0 to 20V/0-25Amp+5%
  • 0 to 10V/0-50Amp +5%

Y Phase

  • 0 to 100V/0-5Amp +5%
  • 0 to 20V/0-25Amp +5%
  • 0 to 10V/0-50 Amp +5%

B Phase

  • 0 to 100V/0-1 Amp +5%
  • 0 to 20V/0-25 Amp +5%
  • 0 to 10V/0-50 Amp +5%
Auxillary relay Sense Contact: N/O, N/C.
Potential free contact: N/O, /N/C, COM 6Amp.
Protection: Over load & short circuit by fuse individual phase.
Timer range: 9.999/99.99/999.9/9999 pick up/drop up relay time.
Auxiliary indication: Cont/start stop indicator push button set voltage & current separate dimmer RYB.
Size: W 550mm, D350mm, H200mm fixing in travel bag.

Dual Type Relay Test Kit

Dual Type Relay Test Kit
Dual Type Relay Test Kit

We also offer our clients the Dual Type Relay Test Kit which comes with a travel bag and can be carried anywhere with ease. These test kits are been supplied with the following specifications -

  • Dual Type Relay test kit With Input voltage 230 VAC 50 Hz
  • Out put voltage  0 to 250 VAC , 0 to 300 VDC /50 amp ac dimer 1
  • Out put  voltage 0 to 250 VAC , 0 to 300 VDC /10 amp ac dimer 2
  • Potential free contact n/o , n/c  aux cont. with lamp  
  • Timer cont. com, n/o, n/c
  • Selected switching between AC-DC voltage, current /testing probe
  • Fine current range selected switch to separate amp
  • Timer range 9.999, 99.99, 999.9, 9999, selected range reset s/w
  • Indicator push button start, stop
  • Travel bag / kit size size 450 mmd,350 mmw

Auxiliary Relay Test Kit

Auxiliary Relay Test Kit
Auxiliary Relay Test Kit

Keeping in mind the diverse requirements of the clients, we are engaged in manufacturing and supplying wide range of Auxiliary Relay Test Kitthat are widely acknowledged among the clients for its flawless performance and excellent quality. Our entire product range is in compliance with international quality standards and policies. Additionally, clients can avail the entire product range in nominal rates.

 

Features:

 

  • Easy installation
  • Quality approved
  • Nominal rates

Primary Current Injection Test Kits

Primary Current Injection Test Kits
Primary Current Injection Test Kits

  • Input voltage: 230 V AC 50 Hz Single phase 30 Amp
  • Output voltage: 0 to 3 V AC
  • Output current: 0 to 2000 Amp AC
  • Protection: Electrical Protection against over & short By Fuse
  • Power on MCB: Provide to switch on the supply of the unit.
  • Input on led : Provided to indicate availability of the input 230V AC supply
  • Set current: Provided to center off spring loaded switch Increase & Decrease ( Low & High Current)
  • On-off push button: Provided to ON & OFF indicator push button Green push button to press start the unit and red push button press for stop the unit.
  • Metering: Digital Panel Current Meter provided to monitor Output Load Current

High Voltage Test Kit

Technical Specification

  • Type: 72 KV DC high voltage test kit
  • Input:230V AC 50 HZ 
  • Out put:zero to 72 KV DC 10 mA

Control

  • Power on: Provided indicator switch
  • On - off: Provided  indicator push button      
  • Volt  meter: Show on zero to 72 KV DC
  • Current meter: Show on likege current zero to 10mA
  • Protection: LT & HT trip protection over load trip protection with indicator trip level 1, 5, 10 Ma
  • Timer: Set  testing time 1min, 2min,and 5min.
  • Connection: Polarity connector probe in put & out put

Circuit Breaker Time Interval Meter

Circuit Breaker Time Interval Meter
Circuit Breaker Time Interval Meter

Electrical Specifications:

 

  • Input Voltage: 230V AC , 50HZ single phase.

Front Panel Indication & Controls:

  • Power On Switch : Provided Switch On The Timer
  • Key Bord : Provided Test Operation
  • R-S232 Port : Provided Connect The Computer
  • Timer Sense : Closed, Trip, C/o & Bounce Time
  • Display : Digital LCD Type
  • Output Termination : Provided To The Rear Side 3pole With Com + Close, Trip Coil Connection


Features:

  • Fully digital micro base control key board operation
  • Close, trip , c-o, bounce time on key board operation
  • Real time and date pass word protected
  • Storage 100 test reading , Re- call facility
  • R-S 232 connected
  • Thermal printer for test operation print
  • Work on live switch yard. Induction protected

Accessories:

  • Breaker Timer
  • Printing Roll
  • Test Probe
  • Input Supply Cord
  • Operating Manual
 

Oil Test Unit (BDV)

We also offer our clients the Oil Test Unit which comes with a mild steel powder coated cabinet which makes them easy to carry and long lasting. The technical specifications are as follows:

  • Input Voltage – 230 VAC
  • Output - 0 TO 60 KV/ 80 KV
  • Volt meter - Shows KV Voltage
  • Trip reading hold on for 10 to 20 sec.
  • 10 mm acrylic oil cup 1 ltr. oil capacity
  • Door lock protection
  • Audible Buzzer at trip condition
  • HV on- off trip indication
  • On – Off reset facility

High Voltage AC Control Unit

High Voltage AC Control Unit
High Voltage AC Control Unit

Leveraging our extensive experience in designing and developing a wide range of electrical equipments, we present a highly efficient range of High Voltage AC Control Units. These are specially designed for efficiently managing high voltage power supply for various industrial applications. These are known for easy installation and operations, quick response and reliability. We offer this sophisticated product at an affordable pricing.

Mili Volt Drop Tester

We also offer our clients the Mv Drop Tester which is been used to check drop across the test points at set current. The specifications of our tester are as follows

  • Input Voltage: 230 VAC
  • Output voltage: 0 to 5 V/100 Amp DC
  • Measuring up to 200 Mv
  • Output o/l electronic trip protection
  • Set v/a manual by variance
  • DPM meter for amp & Mv
  • Indication on, o/l trip, o/p on
  • Start, stop, reset facility with audio buzzer
  • Power on MCB protection over load & short circuit
  • DPM meter Mv / Amp

High Voltage Test Kit

  • In put : 230v ac ± 10%
  • Output : 0 to 5 kv ac
  • Out put current : 0 to 30 ma ac
  • Switch : 1) power no switch 2) on – off indicator push button
  • Meter analog type : 1) volt meter : 2) current meter
  • Triping : electronics protection 0 to 30 ma
  • Timer : in built digital timer 1 min.
  • Terminal : hv earth terminal provided
  • Test probe : provided with safety switch
  • Weight : max. 10 kg
  • Size : w 350 mm x d 260mm x h 150mm

C B T Interval Meter

C B T Interval Meter



Electrical Specifications:

 

  • Input Voltage: 230V AC , 50HZ single phase.

Front Panel Indication & Controls:

  • Power On Switch : Provided Switch On The Timer
  • Key Bord : Provided Test Operation
  • R-S232 Port : Provided Connect The Computer
  • Timer Sense : Closed, Trip, C/o & Bounce Time
  • Display : Digital LCD Type
  • Output Termination : Provided To The Rear Side 3pole With Com + Close, Trip Coil Connection


Features:

  • Fully digital micro base control key board operation
  • Close, trip , c-o, bounce time on key board operation
  • Real time and date pass word protected
  • Storage 100 test reading , Re- call facility
  • R-S 232 connected
  • Thermal printer for test operation print
  • Work on live switch yard. Induction protected

Accessories:

  • Breaker Timer
  • Printing Roll
  • Test Probe
  • Input Supply Cord
  • Operating Manual


Espee Electricals

Mr. P. A. Yavagal (CEO)
Gala No. 113, Amar Industrial Estate, Shankeshwar Nagar, Nandivli Bhopar Road, Dombivli East
Thane - 421204
Maharashtra, India
© Espee Electricals. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited