We supply optimum quality epoxy coatings that are formulated using finest quality chemical. Our diverse gamut of epoxy coatings are as follows: Economical Chemical Protection System (Packing : 1 — 5ltr. Our extreme chemical resistance epoxy polymer can be applied with glass flaked as fillers. These polymers have strong cross linked structure and can be cured by polyamide. Our range can resist chemical like:

• Acetic acid 20%
• Sulfuric acid
• HCL 33%
• Phosphoric acid 0-70%

These are also ideal for replacing rubber lining and polypropylene lining.
Specification:

• Coverage: 15 m2 per unit.
• Color: Maroon (may change colour)
• Applications: Chemical retaining tank, internal lining, bund areas, acid pump internals, solvent areas etc.

Universal Concrete Repair & Protection System:
Our universal concrete repair and protection system is used for repairing damaged floors. Our range encompasses salient attributes like excellent comprehensive strength, appropriate for old as well as new concrete and many more.
Specification:

• Coverage: 305 Sq. mtr. per unit
• Applications: Damaged concrete floors, staircases, Kota Stone jointing, ramps, drains etc.

Clean Room Coatings:
We use ESSKAY 601 abrasion epoxy floor coating system that contains bactericidal additives. Our clean room coating is appropriate for pharmaceutical formulation plant and operation theatre of hospitals. These coatings encompass cleanliness and anti-bacterial properties and can be easily cleanable. Some of the salient attributes are as follows:

• Scratch proof
• Abrasion resistance
• Compressive strength
• Flexural strength
• Chemical resistance

Specification:

• Ceramic enhanced self leveling 2 mm epoxy flooring
• Preparation of floor surface
• Application of concrete primer over prepared surface.
• Application of 2 mm thick SK 601 self leveling floor coating.
• SK 601 coating in 500 U can be given.
• For area where high traffic movement is not there.
  

Our extensive spectrum of  P U wall coating is prepared using supreme quality chemical. These coatings are water based and designed in such way that kills the bacteria coming in contact with wall coating. Our range exhibits following attributes:

• Anti-fungal
• Bactericides coatings
• Non yellowing

 Application:

• Application of cement primer
• Application of two coats of acrylic putty for leveling the wall
• Application of one coat of wall primer
• Application of two coats of food & beverage wall coating.
  

Our extensive spectrum of anti corrosive coating is formulated using premium quality chemical. These coatings are used in protecting steel and delivers excellent corrosion and chemical resistance with minimal surface preparation. Two coats of solvent based self primary epoxy coating system gives excellent protection in metal and concrete surface. Low VOC product intended for single coat application over metal and concrete surface.

Specification:

• Salt fog test: Passes for 10,000 hrs.
• Coverage: 7 sq. m. per ltr.@100 dft.
• Color: All major colors
• Applications: Steel, structures, pipe lines, tank externals, demarcation line on industrial floors etc.
  

Our extensive spectrum of water proofing coating is formulated using supreme quality chemicals. We offer our gamut to various industries and following are salient attributes:

• Attractive range of finishes and colors
• Outstanding Adhesion
• Excellent chemical resistance
• Excellent abrasion resistance
• Wide choice of systems and properties
• Food safe surfaces
• Easy to apply
  

We offer general purpose adhesive to various industries within the domestic territory. Our adhesive is prepared from superior quality chemical. Following are the salient features: Some adhesives are exclusively used in hologram industries.

• High cohesive strength
• Chemical resistance
• High bond strength
  

We provide a wide range of rubber based adhesive that is prepared from top notch quality chemical. these are widely used in industries like automobile, electronics, construction, defense, bus body building, shipping, telecommunication & railways etc. Our gamut exhibits following attributes:

• High performance
• High bond strength
• High adhesive strength
  

We provide diverse range of Specialty adhesive that is prepared from premium quality chemical. These are specifically developed for bonding treated Teflon films to foil or polyester and glass fiber screen. Our heat-applied asphalt lamination coating and adhesive exhibits following features:

• Offers good adhesion
• Tack and block resistance in a uniform coating
• Ideal for bonding several substrates including polyester, propylene and foil construction
• Fire-retardant and pressure-sensitive adhesive

Quality of our specialty adhesive is apparent from the Boeing aircraft corporation flammability vertical burn test bss7230 (12 second ignition) over 2 mil polyester.

Our gamut of Red Oxide Primer is formulated using top notch quality chemicals. The primer has properties of physical drying and has extreme corrosion resistance. It is also resistant to water and chemicals. The red oxide primer is mainly used in severely corrosive environment.

Specification:

• Viscosity : 100±10sec by ford cup No.B-4 at 30°c
• Sp. Gr. : 1.40 .05 Kg/Ltr
• Drying time : 2 to 4 hours
• Flash point : Not below 25°c
• Covering capacity: 10 to 12 sq.mtr. at 35 micron DFT on smooth and non absorbent surface
• Method of application: By brush or spray
• Shelf life : 6 months
  

We provide wide range of Universal primer prepared from superior quality chemical. Our range used in various industries and customized as per client specification. Our gamut exhibits following attributes:

• Chemical resistance
• Water resistance
• Corrosion resistance
  

Our gamut of synthetic enamels is formulated using finest quality chemical. Synthetic enamel is a quick drying, high gloss enamel having hard-wearing properties. It is suitable for exterior and interior use, both on wood and metal surface.

Specification:

•  IS. 2933
• IS-133 
  

Some of the unique traits are as follows:

• Supply Viscosity - 90-110 Secs. By flow Cup No.4@ 30°c.
• Weight Per 10 Litre - 9.0 TO 11.5 Kgs.
• Drying Time - Surface Dry within 2 hours
• Hard Dry Within 6 Hours.
• Color - Close match to standard shade.
• Finish - Smooth & Glossy
• Scratch Hardness - Passes 1500 gms.
• Flexibility & Adhesion - Satisfactory
• Covering Capacity - 12-14Sq. Meters per Litre.
• Exterior Durability - Excellent
• Resistance to Water - Satisfactory.
  

Our diverse assortment of Varnish is formulated using optimum quality chemical. These are usually a combination of a drying oil, a resin, thinner or solvent. Varnish finishes are usually glossy but may be designed to produce satin or semi-gloss sheens by the addition of "flatting" agents. These are used in wood finishing and also applied over wood stains. Some of the salient features are as follows:

• Transparent
• Hard
• Protective Finish/ Film
  

We offer diverse range of coving that is prepared from premium quality chemical like concrete primer, aggregates and many more. These are applied for rounding of wall to floor, wall and wall to ceiling etc. These coving gives a joint free cleanable area along with floor and wall coating. Covings are made in following sizes.

• Wall to floor coving -75mm×75mm radial
• Wall to Wall coving -50mm×50mm radial
• Pencil coving - For window frames, Electric panels etc.