The Europack Flat Bed Blister Packing Machines are Thermoforming Machines with automatic Forming, Sealing and Trimming Operations. The machines are available for both Rigid and Flexible Packing.

Sealing Technique: For the smaller packs a simple sealing method where a sealing die moves on top and applies pressure on the packs by pressing itself against the top heated sealing plate. For special requirements a pneumatically moving sealing top plate can be provided to ensure proper heat transfer to the sealing layer.

Trimming Technique: Depending on the material and the desired pack shape, different cutting units are used.

Rectangular Flexible Packs: Two part cutting is done using cross knife or die punch depending on the requirement.

Shape Rigid Packs: Die and punch cutting system is provided to cut packs in different shapes.

Packaging Material:

Rigid bottom Webs: PVC, HIPS or any other thermo formable material.
Flexible Bottom Webs: PP/PE, PA/PE
Top Webs: Lacquer Coated Paper / Foil or any other suitable laminate to seal with the bottom web.

Applications:

• Consumer durables like Toys, Tooth Brushes, Adhesive Tubes and toiletries.
• Precision Engineering goods like Bearings, Drill Bits, Watches and Electonic Components etc.
• Pharmaceutical products like Ampoules, Vials, Ointment Tubes, Tablets & Capsules.
• Food Products like Confectionaries, Portion Packs of Jam, Honey and Margarine.

Product Improvement is a continuous process at EUROPACK. The data given here is subject to revision.

Salient Features:

• "Contact Heating" for Faster Cycle.
• Adjustable Width and Travel of the Machine.
• Fully Automatic Roll Fed Machine, Loading, Clamping, Forming is Automatic.
• In Built Plug assist Arrangement for Deep Draw Articles.
• Plate Cooling instead of Die Cooling. Cost of the Dies reduced Substantially.
• Suitable for PVC, HIPS, PET, EPS and Other Forming Grade Material
• Size reducing Frames available.
• Robust Machine with "Powder Coated" structure.
• Power Consumption only 3 KW

Technical Specifications:

Model	EP/AB 1812	EP/AB 1420
Effective Forming Area	18" X 12"	14" X 20"
Maximum Draw	100 mm	100 mm
Roll Width	20.5"	22.5"
Minimum Air Pressure	4.5 Bar	4.5 BarMaximum Speed
Maximum Speed	10 Cycles/ Min	10 Cycles/ Min
Power Supply	440 V, 3 Phase	440 V, 3 Phase

Applications:

Pharmaceuticals	Cosmetics	Food Products	General
Ampoules & Vials Trays	Soap Boxes	Jams and Pickles	Stationery Industry
Ointment Tubes	Lipstick Trays	Frozen Meat	Household General Products
Hospital Products	Nail Polish	Fish or Poultry	Toys and Games
Boxes, Cartons etc.	Mascara & Perfumes	Mithai and Snack Boxes	Audio/Video Equipment

Salient Features:

• Easy Changeover of the Moulds
• Plug Assist arrangement for Deep Draw Articles
• Size reducing frames available
• Robust machine with "Powder Coated Structure”

Technical Specifications:

Effective Forming Area	Upto 2,000 X 2000 MM
Maximum Draw	500 MM
Output	10 to 60 Cycles / Hr
Material	HDPE / ABS / HIPS / Acryic / PP / PC
Thickness	2 mm to 10 mm

Applications:

• Refrigerator inner liners and doors in HIPS
• Bathroom and Kitchen Cabinets
• Bath Tubs, Deep Sinks and Sanitary Wares in Acrylic
• Briefcase and Suitcase Shells in ABS
• Tube Light Panels, Street Lamps, Lamp Sheds
• Industrial Trays for Material Handling
• Automobile Products like Dash Boards, Door Panels
• Truck Liners, Bumpers, Stepney Covers
• Cable Joints for Underground Cables
• Glow Signs and Large Signages for Advertisement
• 3D Posters for Outdoor Advertisement
• Toy Cars Structure for Children
• Decorative Doors and Panels

This Machine is used to Cut, Separate and Trim Individual Blisters in Plastic with the aid of a cutting tool. Apart from these the Machine is also ideally used for Cutting Paper, Rubber etc.up to 2 mm Thickness.

Salient Features:

• Extremely Versatile, High Production
• Positive Grip ensures Perfect Cutting
• Easy operation and does not need any skilled operator
• Adjustable Roller Height
• Uses Low Cost Steel rule Cutting Tool
• Machine Equipped with Safety Devices at Roller end
• Drive provided in both the Rollers
• Materials upto 2 mm Thickness like Plastics, Blisters and Paper can be easily cut.

Technical Specifiactions:

Model	EPC 5050
Max. Cutting Area	500 x 500 mm
Power	380/440 V 1 KW
Operation	Double Drive Motoried
Appr. Machine Dimensions	1.3 x 0.8 x 1.2 M
Gross Weight	250 Kgs

Technical Specifications:

MODEL	TFM 2040	TFM 3050	TFM 3060
Forming Area (mm)	335X200	400X200	500X300
Width (mm)(Max-Min)	335 - 165	400 - 165	500 - 200
Stroke Length (mm) (Max-Min)	200 - 50	200 - 50	300 - 50
Draw (mm)(Max)	100	100	125
Dry Cycles/min (Max)	25	25	25
Sheet width (mm)(Max - Min	370 - 200	450 - 200	540 - 250
Sheet thickness(Max - Min)	0.3 - 1.2	0.3 - 1.2	1.5 - 0.3
Reel Dia (mm)(Max)		750
Heating units	1	1	1
Total heating capacity (KW	10	12	18
Type of heaters	- - - - - - - - - - Infrared Ceramic (Imported) - - - - - - - - - -
Total connected load (KW)	14	16	22.25
Compressed air reqd.(Litre/Min)	1500@5kg/cm2	1800@5kg/cm	2500@7kg/cm2
Chilling Plant capacity (K Cal/hr	9000	9000	16000
Raw material (fomable grade)	HIPS	HIPS	HIPS
Approx. weight of the machine(KGs	1200	1500	2500
Approx Dimensions of machine (M2)	2.9 X 1.7 X 2.9	2.9 X 1.7 X 2.9	5.0 X 2.0 X 3.8

• Our policy is of continuous development & improvement.
• Output depends on grade of material, thickness, processing and operating parameters.
• Elecrical supply of 440V +/- 5% is required. In case of large fluctuations, it is recommended to use Voltage Stabilizer.

Specifications
Material	HIPS
Production/hour	60 to 80kg/hr
Film thickness range	100 to 1000 MICRONS
Layflat tubing width	800 mm
Power supply	3 Phase, 415 V, 50Hz
Water consumption	500 litre/hr
500 litre/hr	5 Kg/cm
Screw(65 MM)
Material	EN-41B, Stress Relieved, Gas Nitrided and Hard Chrome Plated
L/D Ratio	26:1
Screw type	Barrier type with Maddock mixing zone
Barrel Cooling zones	5
Barrel
Material	EN-41B, Nitrided
Cooling arrangement	Blower cooling for zones 2 & 3
No. of Zones	4
Heating system	Mica Band Heaters
HOPPER	Capacity-50 kg.
MAIN DRIVE	20 H.P. A.C. motor
GEAR BOX	Helical type with integral thrust bearing housing
Cross Head and Die
Die size	200mm
Heating zone	2 nos.
Air ring	Air ring made of Aluminium provided with 1 H.P. Blower

Take-Off Unit The take-off unit is fabricated of M.S. Profile having a total height of 12 fts. It has 2x850mm nip rolls with manual clamping arrangement with bearing reduction gearbox, D.C. motor (1/2 H.P.) Flattening board and Irish ring.

Control Panel Consisting of 6xPID Temp. Controller, Ammetors, thermocouples, on/off switch for the entire cabinet, starter for the blower will be provided. D.C. Drive of 1/2 H.P. for Nip Roller and Winder.

Technical Specifications

Model No.	ERP 50	ERP 65	ERP 75	ERP 90
Screw Dia (mm) (inch)	50 (2)	65 (2.5)	75 (3)	90 (3.5)
L/D Ratio	20:1	20:1	20:1	20:1
Screw Drive	- - - - - - - - - - - - - -With Gear Box - - - - - - - - - - - - -
Screw Drive Motor (HP)	7.5	15	20	25
Palletiser Motor (HP)	0.5	1	1	1.5
Heating Load (KW)	10	15	18	18
Output (KG/HR)	15-20	30-40	60-75	75-100
Palletizer Size (Inch)	6	6	8	8
Palletizer Price	50 K	50 K	55 K	55 K
Palletizer Capacity	20 KG
MS Water Tank + Stand	10 K	10 K	10 K	10 K

Agglomerator is ideal to convert film scrap of LDPE, HDPE, HM, PP, BOPP, Tapes Rafia, etc. into Dense cubes for easy feeding into Extruder.

Used for preheating and mixing of materials.

Standard Models from 30 kgs/per hour to 140 kgs/hour or more as per your requirement.

Supply of Agglomerator Machine fitted with motor & 4 Rotary & 4 Fixed Blades (6 & 8 for EPA/60) & with material of construction of the tank as MS as follows:

EPA/30 with 30 HP Motor & 120 KGs output