Eurotech Assessment And Certification Services Private Limited

1. Total luminous flux
2. Electrical powers
3. Luminous Intensity distribution
4. Efficacy (lm/watt)
5. Chromaticity

1. LM-79 requires complete luminaire testing
2. Traditionally, photometric evaluation of lighting products is based on separate tests for lamps and luminaires
3. For SSL products, LED lamps typically cannot be separated from their luminaire because of heat effects

1. Relative testing – Lamps of interest and luminaire are measured separately. Then the actual light distribution and intensity of the complete luminaire of interest is derived by normalization of the test data
2. Absolute testing – The actual light distribution and intensity of the luminaire of interest is measured directly from the complete luminaire.

• Electrical Testing Laboratoriesx remove
• Electrical Testing Servicex remove
• Testing Laboratoriesx remove
• Environmental Testing Laboratories

Additional Information:

• Item Code: ITC-05
• Delivery Time: 10 days
• Packaging Details: 17k

ITC can do Electrical Safety testing against below international standard like:

• IEC 61010-1 : Lab Instruments
• IEC 60204-1 : Control Panel
• IEC 60595 : LED luminary
• IEC 61347 : Lamp control gear
• IEC 60950 : Information technology equipments
• IEC 60601 : Electromedical equipments
• IEC 60065 : Audio video & similar product
• IEC 61439 : Low voltage switchgear & control gear assemblies
• IEC 60034 : rotating electrical machine and more contact us for more information…

ITC can do Electrical Safety testing against Laboratory & Measuring Instruments equipments for following types of products/standards:

Popular standards for Laboratory & Measuring Instrument Product testing are IEC 61010.

Electrical control equipment, Electrical microscopes, Power supply, Auto transformer, Electrical laboratory equipment, Signal generators, Transducers, Transmitters

Popular standards for Laboratory & Measuring Product testing are IEC 61010.

General Safety Testing for Luminaries

• Testing in Single Fault condition
• Marking & Documentation
• Protection against electric c shock
• Determination of Accessible parts
• Protective Bonding
• Creepage and Clearances distances
• Drop Test
• Protection By Interlocks

• Electrical Resistivity Testing Servicesx remove
• Electrical Testing Laboratoriesx remove
• Electromagnetic Field Testingx remove
• Electrical Testing Service

We have developed a special testing facility against Solid particle protection & Liquid ingress protection generally called as the IP testing. We have below test facility at present in our;

1. IP 1X, IP 2X, IP 3X, IP 4X for protection of machine against Penetration by solid foreign objects

2. IP 5X for Dust Protection

3. IP 6X for Dust Protection

4. IP X3, IP X4, IP X5, IP X6, IP X7 & IP X8 for protection against ingress of water.

Ingress protection (IP) testing at ITC India NABL accredited Electrical Safety Testing laboratory can determine a products susceptibility to solid particle (including dust) ingress and liquid ingress (water).

1. IEC 60529

2. BS EN 60529

1. Ingress Protection of (IP) Ratings (Solid ingress)

2. Ingress Protection (IP) Ratings (Liquid ingress)

The testing will access the protection of the equipment against ingress of solid bodies and/or liquids, varying over differing degrees of protection, depending upon the requirements you place on your product.

The test specified in the first digit of the Protection Index (IP1X, IP2X, IP3X, IP4X, IP5X, IP6X), meaning protection against solid particles and dust entry into the fixture according to the BS EN 60598-1 IEC 60598 – 1, IEC 60529.

• Electrical Testing Laboratoriesx remove
• Electrical Testing Servicex remove
• Water Testing Servicesx remove
• Testing Laboratories

ITC can do Electrical Safety testing against Consumer, Household, and Commercial Appliance Equipment equipment for following types of products/standards:

Electric Iron, Warming plates, Electric Kitchen Machines, Refrigerators, Room Heaters, Electric Immersion, Water Heater, Electric Stoves, Vacuum Cleaners and Water-Suction Cleaning Appliances

Popular standards for Consumer, Household & Commercial Appliance Equipment Product testing are IEC 60335-1:2010-05, IS:302-1: 2008, IS 302-2-12: 1993, IS 302-2-14: 1994, IS 302-2-24: 1994, IS 302-2-30: 2007, IS 302-2-201:2008, IS 302-2-202:1992, EN 60335-1:2010, IS 4250:1980, IEC/EN 60335-2-2, IEC/EN 60335-2-3, IEC/EN 60335-2-12, IEC/EN 60335-2-14, IEC/EN 60335-2-30, IEC/EN 60335-2-89 etc

General Safety Testing for Luminaries

• Classification
• Marking & Instruction
• Power I/P & Current
• Leakage Current and electric strength at operating temp
• Stability & Mechanical Hazards
• Internal Wiringg
• Creepage & Clearance
• Resistance to heat and fire
• Temperature withstand test for bowl

• Electrical Testing Laboratoriesx remove
• Electrical Testing Servicex remove
• Machine Testing Servicesx remove
• Resistance Testing Service

ITC can do Electrical Safety testing against Information Technology Instruments equipments for following types of products/standards:

Popular standards for Information Technology Product testing are IEC 60950.

(Monitor , SMPS, Network card ,UPS, Computer, Modem ,Cable tester , Balance, Refrigerated enclosure)

Popular standards for Information Technology Product testing are IEC 60950

General Safety Testing for Luminaries

• List of critical components
• Electrical data
• Durability
• Access to energized parts
• Limited power source measurement
• Protection against hazardous moving parts
• Stability
• Drop Test
• Touch current and protective conductor current
• Impulse test

• Electrical Testing Laboratoriesx remove
• Electrical Testing Servicex remove
• Testing Laboratoriesx remove
• Laboratory Testing Services

ITC can do Electrical Safety testing against Battery Testing for following types of products/standards:

• Marking Durability
• Accessibility Test
• Protection against Electric Shocks
• Power I/P & Current
• Heating/ Temperature Rise
• Leakage Current
• Di-Electric strength
• Transient Impulse overvoltages
• Moisture Resistance
• Leakage current and Electric strength
• Endurance
• Abnormal Operation
• Stability & Mechanical Hazards
• Mechanical strength
• Ingress Protection
• Provision for Earthing
• Creepage & Clearance
• Resistance to heat and fire
• Resistance to rusting
• Creepage distances and air clearances
• Instability hazards

• Electrical Testing Laboratoriesx remove
• Electrical Testing Servicex remove
• Laboratory Testing Servicesx remove
• Testing Laboratories

ITC can do Electrical Safety testing against Machinery equipment for following types of products:

Metalworking machinery, Food machinery, Plastic and rubber machinery, printing paper and board machinery, Wood machinery, Textile machines, laundry machines, footwear machinery, Construction and building material machinery,etc..

List of tests as per product safety includes:

• Incoming supply conductor terminations and devices for disconnecting and switching off
• Protection against electric shock
• Protection of equipment
• Equipotential bonding
• Control circuits and control functions
• Operator interface and machine-mounted control devices
• Control gear: location, mounting, and enclosures
• Conductors and cables
• Wiring practices
• Electric motors and associated equipment
• Accessories and lighting
• Marking, warning signs and reference designations
• Technical documentation
• Verification of conditions for protection by automatic disconnection of supply
• Insulation resistance tests
• Voltage tests
• Protection against residual voltages
• Functional tests

ITC can do Electrical Safety testing against Luminaries/LED equipment for following types of products/standards:

Fixed general purpose luminaries, Luminaries for road and street lighting, Aquarium luminaries, Lighting chains, Emergency lighting.

LED-lamps , LED bulb , LED based street lights ,flood lights , tube lights , DC or AC supplied electronic control gear for LED modules , Indoor-outdoor LED luminaires etc

Popular standards for LED Product testing are LM 79 ,IS 16106:2012 ,IEC 61347-2-13 ,IEC 62384,IEC62722-2-1,IEC 62031,IS 15885(part2/sec13),IS 16103,IS 16102,IEC 62612,IEC 60969 etc

General Safety Testing for Luminaries

• Marking
• Construction
• External and internal wiring
• Provision for Earthing
• Protection against electric c shock
• Resistance to Dust, Solid objective and Moisture
• Insulation Resistance and electric Strength.
• Creepage and Clearances distances
• Endurance and Thermal Test
• Resistance to Heat ,Fire and Tracking
• Screw Terminals
• Screwless terminals and Electrical Connections

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer),Other

ITC can do Electrical Safety testing against below international standard like:

• IEC 61010-1 : Lab Instruments
• IEC 60204-1 : Control Panel
• IEC 60595 : LED luminary
• IEC 61347 : Lamp control gear
• IEC 60950 : Information technology equipments
• IEC 60601 : Electromedical equipments
• IEC 60065 : Audio video & similar product
• IEC 61439 : Low voltage switchgear & control gear assemblies
• IEC 60034 : rotating electrical machine and more contact us for more information…

ITC are a leading service provider for the Services which includes services like EMC/EMI testing & Environmental Testing for following types of products/standards:

We focus on the following industries product EMC/EMI testing:

• Industrial electronics
• Consumer electronics
• Telecommunications
• Medical

• EMC Testing Servicesx remove
• Electrical Testing Laboratoriesx remove
• Electrical Testing Servicex remove
• Laboratory Testing Services

We can do the following EMC testing on your product.

Additional Information:

• Item Code: EMC-01-ITC

ITC can do Electrical Safety testing against Luminaries/LED equipment for following types of products/standards:

Fixed general purpose luminaries, Luminaries for road and street lighting, Aquarium luminaries, Lighting chains, Emergency lighting.

LED-lamps , LED bulb , LED based street lights ,flood lights , tube lights , DC or AC supplied electronic control gear for LED modules , Indoor-outdoor LED luminaires etc

Popular standards for LED Product testing are LM 79 ,IS 16106:2012 ,IEC 61347-2-13 ,IEC 62384,IEC62722-2-1,IEC 62031,IS 15885(part2/sec13),IS 16103,IS 16102,IEC 62612,IEC 60969 etc

General Safety Testing for Luminaries

• Marking
• Construction
• External and internal wiring
• Provision for Earthing
• Protection against electric c shock
• Resistance to Dust, Solid objective and Moisture
• Insulation Resistance and electric Strength.
• Creepage and Clearances distances
• Endurance and Thermal Test
• Resistance to Heat ,Fire and Tracking
• Screw Terminals
• Screwless terminals and Electrical Connections

We can do the testing of your LED product against the different standard like LM 79, IS 16106, IEC 60598-1, IEC 61347-2-13, IEC 62384, IEC62722-2-1, IEC 62031, IS 15885(part2/sec13), IS 16103, IS 16102, IEC 62612, and IEC 60969 etc

• Electrical Resistivity Testing Servicesx remove
• Electrical Testing Servicex remove
• Electrical Testing Laboratoriesx remove
• Testing Laboratories

Additional Information:

• Pay Mode Terms: D/P,T/T (Bank Transfer),Other

Owing to the rich industrial experience and expertise in this domain, we are instrumental in providing Electrical Testing Service. This Electrical Testing Service is known for its high reliability and excellent rates.

we are NABL approved Testing Laboratory (with Certificate No. T 1811 attached herewith) with specialization to test against EN and IEC standards for electrical safety leading to CE/NIST/IEC certification.

• Electrical Testing Laboratoriesx remove
• Electrical Testing Servicex remove
• Testing Laboratoriesx remove
• Laboratory Testing Services

ITC can do Electrical Safety testing against below international standard like:

• IEC 61010-1 : Lab Instruments
• IEC 60204-1 : Control Panel
• IEC 60595 : LED luminary
• IEC 61347 : Lamp control gear
• IEC 60950 : Information technology equipments
• IEC 60601 : Electromedical equipments
• IEC 60065 : Audio video & similar product
• IEC 61439 : Low voltage switchgear & control gear assemblies
• IEC 60034 : rotating electrical machine and more contact us for more information…

• Electrical Testing Servicex remove
• Testing Laboratoriesx remove
• Electrical Testing Laboratoriesx remove
• EMC Testing Services

ITC can do Electrical Safety testing against Photovoltaic (PV) Modules equipment for following types of products/standards:

(Photovoltaic modules, Sun cubes, etc.)

Popular standards for Photovoltaic (PV) Modules Product testing are IEC 61215 & IEC 62108

General Safety Testing for Luminaries

• Visual Inspection
• Insulation Test
• Thermal Cycling
• Humidity Freeze
• Damp Heat
• Wet Leakage Current Test

• Electrical Testing Servicex remove
• Solar Modulex remove
• Electrical Testing Laboratoriesx remove
• Laboratory Testing Services

ITC can do Electrical Safety testing against Electro Medical equipments for following types of products/standards:

Popular standards for Electro Medical Product testing are IEC 60601-1, IS 13450 etc

General Safety Testing for Electro Medical

•   Power Input
•   Marking & Instruction
•   External and internal wiring
•   Resistance to environmental Stress
•   Instability hazards
•   Creepage and Clearances distances
•   Determination of Accessible Parts
•   Protective earthing, functional earthing and potential equalization of ME EQUIPMENT
•   Leakage currents and patient auxiliary currents

For List of standards under 60601

ITC can do Electrical Safety testing against Environmental Testing equipment against following types of products/standards:

ITC can do Electrical Safety testing against Cable Gland Testing for following types of products/standards:

BS 6121: Specification for mechanical cable glands for elastomer and plastics insulated cables, IEC 62444: Cable glands for electrical, BS EN 50262: Cable glands for electrical installations Test carries out under this standard. installations

Owing to the rich industrial experience and expertise in this domain, we are instrumental in providing Electrical Testing Service. This Electrical Testing Service is known for its high reliability and excellent rates.

we are NABL approved Testing Laboratory (with Certificate No. T 1811 attached herewith) with specialization to test against EN and IEC standards for electrical safety leading to CE/NIST/IEC certification.