Our company offers gas blowers, which are based on positive displacement rotary air blower principle. These are specially developed for pumping of Biogas and are generally used in Biogas lines to boost the gas pressures to meet the burner input demand. These gas blowers are generally vertical in construction, that is suction top and discharge bottom, so as to prevent any accumulation of corrosive matter inside the casing. Since they operate in closed loop, suction and discharge silencers are generally not required. Special material of construction, lubrication and sealing arrangements make them ideal choice for Biogas applications.

We also offer special blowers, capable of handling different gases. Material of construction and constructional details vary to meet different gas requirements. For inflammable and toxic gases, leak tightness is ensured. Basic designs are modified, depending upon the nature of gas to be handled and customer's requirement. Water jet injection cooling can also be provided to keep the gas temperature low.

Standard Design & Constructional Features

• 100% oil free air delivery
• Factory Engineered, factory guaranteed, superior product
• Alloy steel hardened and ground timing gears
• Anti-friction bearings
• Rotary oil sealings
• Rigid one piece CI casing and side plates
• Horizontal and vertical configurations available
• Easy rotor timing setting
• No vanes, valves or rings to wear
• Large inlet and outlet connections for minimum loss
• Improved volumetric efficiency and reduced operating temperatures
• Alloy steel toughened shafts ground to close tolerances

Our company offers water cooled air blowers, which are similar to air cooled type in construction and performance except in the change of cooling arrangement. In water cooled blowers the main casing & side plates have water jackets around them, where water is circulated, which dissipates the heat generated and keeps the internals cool.

Water cooled blowers are recommended for applications where discharge pressures exceed 7000 mm WG, since it is essential to dissipate heat for efficient working and long life of the bearings and seals. We have a unique design of single inlet & single outlet for cooling water and no cumbersome water pipe connections externally. Internal circulation of water to various areas is through inbuilt channels. This unique design makes the operations very simple, yet very effective. The cooling water inlet is at the bottom so that the water rises up against gravity, reaching all the corners before it comes out from the outlet. The flow rates of cooling water are low. The Standard Design & Constructional Features of these blowers are

• Factory Engineered, factory guaranteed, superior product
• 100% oil free air delivery
• Alloy steel hardened and ground timing gears
• Anti-friction bearings
• Rotary oil sealings
• Rigid one piece CI casing and side plates
• Horizontal and vertical configurations available
• Easy rotor timing setting
• No vanes, valves or rings to wear
• Large inlet and outlet connections for minimum loss
• Improved volumetric efficiency and reduced operating temperatures
• Alloy steel toughened shafts ground to close tolerances

We offer dry vane pumps, which is 100% oil free and cater to the industrial demands. These compact, quiet, sturdy & reliable pumps are suitable for delivering small volumes of 100% oil free air at moderate pressures essentially required for food, medicine, printing, electroplating, agitation, small STP & ETP Plants and other similar applications. These vane pumps are precision machines with simple construction & are highly efficient in operation.

They require practically zero maintenance and are rated for continuous duty operation. They fall in the category of positive displacement machines and are capable of delivering relatively constant discharge at varying discharge pressures to meet the process requirements. No internal valves or setting are required, making them simple in operation and maintenance.

They are silent in operation and require no internal lubrication. These vane pumps are made of prime quality impregnated graphite with wear compensation mechanism to ensure high efficiency during their entire life. Multi vane design reduces pulsations giving less pulsating flow eliminating the need of additional accessories.
These pumps are in compact package units with essential accessories such as Pump Motor Base Frame, Guards, Drive, Suction Filter, Relief Valve & Pressure Gauge.
The Standard Design & Constructional Features of these pumps are:

• 100% Oil Free Air
• Wide range of pressures
• Quite Operation
• Compact Design
• Durable for long life
• Low maintenance
• Long vane life designed for continuous duty operation
• Supported by Everest Expertise

Our company offers vacuum boosters, which are used in growing number of applications where fast pump down times are required, and environment or energy usage concerns, rule out any alternative pump selection. These pumps enhance the performance. The ultimate vacuum and pumping speed of oil-sealed / water-ring / dry vacuum type of mechanical pumps are used in diverse industry.
Some of the outstanding advantages include:

• High Vacuum of the order of 0.001 Torr or better.
• High pumping speeds at low pressures. Speed is boosted by 3 to 10 times or more
• Relatively lower power consumption for such performance boosting
• Considerable reduction in pump down time of vacuum machines
• Prevents oil back streaming from rotary pump
• Dry Pumping - Suitable for Gas / Vapour Loads
• Boosts vacuum performance of existing plant & machinery