Plastic Hub Plastic Blade

X–Series
Diameter 520 mm – 1370 mm
The X-series impeller is specially developed to produce high air flow rates of relatively low rotational speeds. The blades have regular circular profile with same width at the tip and root. This is high strength injection molded thermal plastic impeller diameter ranges from 520 mm to 1370 mm with pitch angles from 20° to 45°.

The series –X is specially designed for ventilation systems, condensers, Dry Coolers and cooling towers.

• Improved Efficiency
• Lower Absorbed Power
• Heavy Duty
• Temperature Range (-40° C to 120° C)

Y –Series
Diameter 350 mm – 1250 mmThe Y series of Impeller utilize blades with an airfoil profile. The blade dimension is chosen to provide a uniform blade area resulting in optimum performance. Impeller diameters range from 350mm to 1250 mm with pitch angles from 15° to 45° to meet your specific application requirement.

This impeller utilizes three high strength injection molded thermal plastic (PPG/PAG) Hub range from 12, 14, 18 blade. They can be fitted with less than the maximum number of blades (i.e. a 12 cavity hub can be fitted with six blades while the remaining cavities are plugged with spacers).The impeller change from (12-12 to 6-12) (14-14 to 7-14) (18-18 to 9-18).

• Heat Ageing Stabilized
• Standard Duty
• Temperature Range (-40° C to 120° C)