Insulation oils get polluted due to heat emitted by transformers during the operations like generating, transmitting and distributing. This oil has a tendency to absorb moisture from windings which leads to gradual deterioration of dielectric strength (Not Re-phrased).
Our range of Mobile Oil Filtration Plant is an aid to this problem as these can efficiently purify this lubricant.
We offer Oil Filtration Plant which is used for purifying and upgrading transformers' oil. Our filtration plans make the oils superbly usable on transformers to comply with standard specifications. Our expertise allow us to design these plants as per customers' specifications. We offer them in varied capacities covering a whole range of applications in low, high and extra high voltage equipment. Our range of Oil Filtration Plant can perform the following functions:
Removal of suspended impurities such as dust, rust, scales, colloidal carbon oxidation sludge etc. up to < 1 micron.
Degassing and dehydration of transformer oil with vacuum
Circulation of heated Oil and filling of treated oil in transformer tank
Prevention of acid formation by evaporation and adsorption method
We also manufacture Transformer Oil Filtration Plant can remove impurities from transformer and switchgear oil. Our filtration plant can remove such as moisture, dirt, air and other gases from oils.
Our range of Transformer Oil Filtration Plant runs on `low temperature and high vacuum` principle. We make our range s per the International Standards 6034 (1989) and its latest revision. We produce our range in variable capacities of 600 to 10000 lph which can be customized to special capacities if required by the clients.
The process or purifying of oils include taking impure oil into the system through the inlet ball valve and then pumping it through a positive displacement pump. Before this complicated process, a filter removes solid particles up to 1mm size and magnetic particles.
The process then include heating the oil up to 60°c, later passing it through the cartridge filters, where particles up to 5 microns are filtered. Our Transformer Oil Filtration Plant carries a specially designed vacuum chamber that removes moisture, air and all the gases. The oil falls by way of gravity over the media inside forming a thin film of oil, exposing a larger surface area. The dissolved moisture and gases are evacuated and the oil is ready. (Cant re-phrase)
We manufacture Turbine Oil Filtration Plants in an array of capacities ranging from 500 LPH to 10000 LPH. We make these plants available in single stage and double stage variants. We devise them depending upon the volume of insulating oil to be filtered.
Our expertise have empowered us to facilitate our customers with higher capacity plants if required, as we also offer our products in customized manner too. We also design our range of plants mobile units besides the regular stationary unit.
For outdoor usage they are supplied with an enclosure. Our range of Turbine Oil Filtration Plants works superbly well as it can treat the unqualified turbine oil and removes the impurities from thus improving its quality. We make these powerful enough so that they can efficiently remove water, gas and other impurities from emulsified turbine oil.
Features:
Our range of Turbine Oil Filtration Plant proffers automatic systems. The with automatic advance system ensures safety, pressure, electricity and temperature constancy with infrared liquid.
Has a trapezoidal, spiral, automatic back flushing system.
Automatic Unmanned, On-line oil purification with turbine or water turbine
Breaks emulsification thoroughly with high- molecule polymeric material
The plants can thoroughly clear the liquid water and can make the oils up to 80% water free. Our Turbine Oil Filtration Plants can effectively de-water the oils through one and two step dehydration method.
Our plants sport distinctive technique to remove impurities by filtering through double FH trapezoidal network. Along with that, absorbing by high polymer material is also a process that our plants include
Has the capacity to equal or surpass 200 and make the cleanness lower grade 6(NAS1638) with its advanced dielectric condensation devices. (Cant be re-phrased)
Our range of Turbine Oil Filtration Plant uses an advanced detaching theory of membrane which clears water and emulsification to purify the lubricant. After the filtration treatment, the oils emulsify to a much lesser degree. This TYA series prevent damage to the lubrication system and extends the life of both the insulating oil and the machinery.(???)
We manufacture our range of Vacuum Drying Autoclaves as per clients' requirements. Our company is also engaged in making high performance autoclaves which increase the efficiency and performance of any plant. This equipment comprises a vacuum autoclave in which a cylinder containing a piston is situated at one end. This cylinder can be closed at the end by a hollow piston containing a condenser casing.
The cylinder is evacuated through a port and there is a piston given to close the port. When the piston is lowered to close the cylinder, immediately an injection valve is opened to fill the cylinder with an impregnating substance.
When the injection valve is shut the piston slowly presses the impregnant out through the neck of the condenser casing. The process then increases the pressure till the ejection valve opens it and a blast of gas appears to clean the cylinder to remove any remaining impregnant.
We also offer Vacuum Impregnation Plants which can be designed as per clients’ requirements. Our range of Vacuum Impregnation Plants comes with the following specifications:
IMPREGNATION CYCLE
It is designed as per the schematic diagram attached and is used for varnish impregnation to be carried out in following steps (???):
Pre-heating the jobs in either Impregnation Chamber or Oven.
Evacuation of Impregnation Chamber (after putting the jobs) to make the voids in the jobs clear and drying of jobs for specific time & required temperature / vacuum.
Induction of impregnant (Varnish) in the Impregnation Chamber from impregnant Tank to submerge the jobs in it.
Pressurize the Impregnation Chamber with dry air or nitrogen to fill the voids with impregnant.
Return the varnish to impregnant Tank.
Evacuate the Impregnation Chamber and cure the jobs either in impregnation Chamber or in Oven for specific time.....(Not Re-phrased)
Impregnation chamber specifications:
Working Volume: 100 Ltrs to 5000 Ltrs. constructed from M.S. plates, bars, structural etc.
Working Pressure: @ 4 kg/ cm2 & Vacuum: As per process requirement.
Lid Opening: Screw Davit type for quick opening & closing.
Samson International Marketing Agency Manufacturing and exporting air filters, compressed air filters, industrial air filters and commercial air filters.
Processing...
