We manufacture Phthalimide for use in Pigment Industry also for use in Phthalimide based other intermediates.

Molecular Weight	147
Physical Appearance	White Crystalline Powder
Purity	99% minimum
Melting Point	232oC – 234oC
Free Phthalic Acid Content	less than 0.2%
Ash Content (Residue)	less than 0.1%
Moisture	less than 0.5%
Packing	25 Kg HDPE / Paper bags

We produce potassium phthalimide which is extensively used in pharmaceutical industry. Its balanced composition makes it a good solvent. We also manufacture it as per the requirements of the clients. It is available in white crystalline and white powder form. Their specifications as per their forms are:

Physical Appearance	White Powder
Molecular Weight	185
Purity	98% minimum
Melting Point	> 300oC
Free Phthalic Acid Content	less than 0.2%
Turbidity 5%solution	less than 10 NTU
Ash Content (Residue	less than 0.1%
Moisture	Not Traceble
Packing	25 Kg HDPE / Paper bags

It is also available in various active concentration such as 10%, 20%, 30%, 50% etc.

The silicone based antifoam emulsion are available in various concentrations depending on its use. The typical available concentrations are 10%, 20%, 30%, 50% and 100%. It is widely used in rubber, petrochemicals, fertilizer, food, detergent industries and at many effluent treatment plants.

Physical Appearance	Translucent Gray Liquid
Active Ingredient	100%
Viscosity	> 2000 CPS
Diluents	Kerosene, Toluene
Shelf Life	9-12 Months
Performance	less than 15 Seconds
Packing	50 /100/200 Kg HDPE Drums

We manufacture alloxan monohydtrate, to cater to the needs of varied pharmaceutical and chemical industries. When producing this chemical it is checked that it is not harmful to use. It is available with the following specifications:

Molecular Weight	160
Physical Appearance	Creamish to yellowish Crystalline Powder
Molecular Formula	C4H2N2O4.H2O
Purity	98% minimum
Melting Point	259 - 260oC
Ash Content (Residue)	less than 0.1%
Moisture	10 – 12% as H2O
Packing	200 Kg HDPE drums

Our range of chemicals also includes 3 cyclohexyl propionic acid. They are largely used in pharmaceutical industries and other chemical based companies. It is available with the following specifications:

Molecular Weight	168
Molecular Formula	C10H16O2
Physical Appearance	low melting white solid
Purity	99% minimum
Refractive Index	1.464 – 1.469
Melting Point	32oC Low melting solid
Moisture	0.5% maximum
Packing	25 Kg HDPE drums

Available as clear liquid above temperature 33°C

We also manufacture sodium lauryl sulphate for use in tooth powder/tooth paste/ shampoo/detergent and various related industries. They are prepared with utmost attention to its composition. It is available with the following specifications:

Molecular Weight	288
Molecular Formula	C12H25NaO4S
Physical Appearance	White Powder
Purity (Active Matter)	94% minimum
PH of 10% solution	7.5 -9.5 at 25oC
Chlorides	less than 0.3%
Sulphates	less than 2.5%
NDOM (Unreacted oil)	less than 2.5%
Moisture	less than 1%
Packing	20 Kg HDPE Bags

Our range of chemicals also includes Murexide (ammonium purpurate). This is used as research indicator and in special grade pigments. It is available with the following specifications:

Molecular Weight	284.19
Molecular Formula	C8H8N606
Physical Appearance	Red Purple Powder
Purity	97% minimum
Wave length (ë Max)	523 - 525 mm
Specific extension E 1%/1CM	575 - 580
Sensitivity / Suitability	Passes Test (< 0.5 ml Of CaCl2 1mg/100 ml)
Packing	As required

We also manufacture cyclohexylamine hydrobromide, to cater to the needs of pharmaceutical and allied industries. They are prepared with special attention to its formulation.

We offer tri chloro acetic acid to cater to the varied needs of our clients. These are manufactured with special attention to its composition. This helps in making the products safe and reliable to use. They are available with the following specifications:

Specifications
Physical Appearance	White Crystalline Powder
Purity	99% Minimum
Chlorides	less than 20 PPM
Moisture	Less than 0.5% (KF)
Residue on Ignition	less than 0.1

We also manufacture sodium lauryl ether sulphate, with various use in shampoo/ cosmetic and related industries. They are prepared with utmost attention to its composition. It is available with the following specifications:

Molecular Weigh	386
Physical Appearance	Colorless thick liquid
Purity (Active Matter)	68% minimum
PH of 10% solution	7.5 -9.5 at 25 OC
Chlorides	less than 0.3%
Sulphates	less than 2.5%
NDOM (Unreacted oil)	less than 2.5%
1,4 Dioxane contenet	less than 100 PPM
Packing	210 Kg HDPE Drums

We offer Barbituric Acid, to be used in different chemical preparations. They are prepared using well researched compositions to ensure their safe and reliable performance. It is available with the following specifications:

CAS No.	000067 -52 -7
Chemical Formula	C4H4N2O3
Molecular Weight	128
Physical Appearance	Off White Powder
Purity	99% minimum
Melting Point	248 – 252oC
Ash Content	less than 0.5%
Moisture	less than 0.5%
Packing	25 Kg HDPE / Paper bags

We manufacture Chloramine T trihydrate for used in water purification and other related Industry. This product is available in powder or tablets for according to requirement of customers.

CAS NO.	7080-50-4
Molecular Weight	281
Physical Appearance	White Crystalline Powder/Tablets
Purity	98% minimum
Melting Point	180oC
PH of 5% solution	8 to 10
Solubility	Soluble in water
Solubility in Alcohol	Maximum Insolubles are 1.5
Packing	25 Kg HDPE Drums / Paper bags