Cable Lugs

Aluminum Alloy Tabular Bi-metallic Terminals are manufactured out of aluminium of purity equal to or greater than 99.5%, having maximum conductivity not less than 60% IACS and are designed as per IS 5082.These are anti-corrosive and user for highly corrosive environment.

Aluminum Reducer Terminals are manufactured out of purity equal to or greater than 99.5%, having maximum conductivity not less than 60% IACS and are designed as per IIS 5082.These are used for terminating one or more Aluminium conductors to a smaller termination area. Aluminium Crimping Reducer Terminals / Lugs For Aluminium Conductor.

Aluminum Crimping Terminals are manufactured out of tubes of purity equal to or greater than 99.5%, having maximum conductivity not less than 60% IACS and are designed as per IS 5082.These are used for terminating all sizes of cables to terminate electrical switching equipments.

AT-XL type of terminals are manufactured out of extrusion tubes of purity equal to or greater than 99.5% having maximum conductivity not less than 60% IACS and are designed as per Aluminium IIS5082 suitable suitable for high voltage application where termination of XPLE cable is required.

Bi-metallic connectors are made from aluminium purity equal to or greater than 99.5%. The barrel is friction welded to the pin thus achieving the best possible transition between the copper pin and aluminium barrel. Barrels are crapped and filled with grease so as to avoid oxidisation of the aluminium.

Bi-metallic terminals for aluminium conductors are manufactured from solid materials by friction welding. This method means that aluminium and copper join  through the heat, which develops when aluminium rotates against copper under pressure.

End Sealing Ferrules are manufactured from electrolytic copper. These Ferrules are used when a perfect connection is needed at the end of cable. Some cables, especially those with small dimeters, may conduct connections without an End sealing ferrule. By using these ferrules strands, deviation can be avoided and the risk of cable breakage can be reduced.

End Sealing insulated ferrules are manufactured from electrolytic copper. These ferrules have dimensions according to 46228 and are used when a perfect connection is needed at the end of a cable. Some cables especially those with small diameters, may conduct badly in electrical connections without an End Sealing Ferrule.

Braco Ring Terminals are designed to offer maximum efficiency under heavy duty applications.Therefore these terminals are ideal for use in application which are subject to continuous , mechanical vibrations viz.engines, railways, moving components etc.The terminal is brazed and soft annealed, which means that the terminal can be crimped in either description. Copper Crimping Fork Terminals / Lugs (Non-Insulated And Insulated).

Braco Ring Terminals are designed to offer maximum efficiency under heavy duty applications. Therefore these terminals are ideal for use in application which are subject to continuous, mechanical vibrations viz.engines, railways, moving components etc. The terminal is brazed and soft annealed, which means that the terminal can be crimped in either description. Copper Crimping Pin Terminals / Lugs (Non-Insulated And Insulated).

Copper crimping reducer terminals are used to terminate one or more aluminium conductors to a smaller termination area. These type of terminals are applicable in tunnel type terminal blocks  viz. Fuse gears, cut-outs, meters etc. Braco is able to produce any copper reducing link that you may require.  copper crimping reducer terminals / lugs for aluminium conductor.

Braco Ring Terminals are designed to offer maximum efficiency under heavy duty applications.Therefore these terminals are ideal for use in application which are subject to continuous , mechanical vibrations viz.engines, railways, moving components etc.The terminal is brazed and soft annealed, which means that the terminal can be crimped in either description. Copper Crimping Ring Terminals / Lugs (Non-Insulated and Insulated).

Braco Ring Terminals are designed to offer maximum efficiency under heavy duty applications.Therefore these terminals are ideal for use in application which are subject to continuous , mechanical vibrations viz.engines, railways, moving components etc.The terminal is brazed and soft annealed, which means that the terminal can be crimped in either description.

Copper tube crimping terminals are manufactured from electrolytic copper tube. The dimensions of the tube are designed to obtain the efficient electrical conductivity and mechanical strength  to resist vibration and pull out.These are terminating any size of cables, electrical switching equipments, where vibration is critical.

Copper tube crimping terminals are manufactured from electrolytic copper tube. The dimensions of the tube are designed to obtain the efficient electrical conductivity and mechanical strength to resist vibration and pull out. These are terminating any size of cables, electrical switching equipments and where vibration is critical. Copper Crimping Terminals / Lugs With Inspected Hole For Copper Conductor (Heavy Duty)

Copper tube crimping terminals are manufactured from electrolytic copper tube. The dimensions of the tube are designed to obtain the efficient electrical conductivity and mechanical strength to resist vibration and pull out. These are terminating any size of cables, electrical switching equipments and where vibration is critical. Copper Crimping Terminals / Lugs With Inspected Hole (Light Duty).

Connectors are designed for jointing low voltage conductors. Made of electrolytic copper tube having the same dimension as CT serious lugs. Connectors are annealed and electrolytically tin plated. They feature an internal taper at both ends to ease the introduction of conductor and dimple (if required) to ensure correct positioning.

Connectors are designed for jointing low voltage conductors. Made of electrolytic copper tube having the same dimension as CT serious lugs.Connectors are annealed and electrolytically tin plated. They feature an internal taper at both ends to ease the introduction of conductor and dimple (if required) to ensure correct positioning.

Double hole aluminium crimping terminals which are also known as "Non rotating terminals" are manufactured out of ec grade extrusion tubes drawn to the required sizes having minimum conductivity not less than 60% iacs and are designed as per is 5082. Double Hole Aluminium Crimping Terminals / Lugs For Aluminium Conductor.

Copper long palm terminals are manufactured from electrolytic copper tube. These are used where more secured termination is required as it can easily accommodate two bolts to reduce drift. All terminals are standard with blank palm and stud holes can be punched to order. These terminals are normally used in vibrating applications.

Aluminum Long Barrel Aluminium Crimping Terminals are manufactured out EC grade extrusion tubes drawn to the required sizes having maximum conductivity not less than 60% IACS and are designed as per IIS 5082.

Braco Open Close Terminals are made out of EC grade copper. These terminals ensure completeness and ease of conductor entry so that contact is reliable and have more tensile strength. The terminals are annealed to avoid cracking or breaks and are tin plated to avoid oxidization and to achieve maximum corrosion protection.

Snap on terminals made of phosphorus bronze. These are used in electrical and electronic installation like PCB mounted devices, electronic power relays etc.These can also be provided insulation.

Soldering type copper terminals are made out of EC grade copper and used where high value of current flow is desired and to soldering loose terminations are avoid, thereby preventing heating at termination ends. Termination tin plated to avoid oxidization and to achieve maximum corrosion protection.

Soldering type copper terminals are made out of EC grade copper and used where high value of current flow is desired and to soldering loose terminations are avoid, thereby preventing heating at termination ends. Termination tin plated to avoid oxidization and to achieve maximum corrosion protection.

Soldering Type weak back ferrules are manufactured of copper and are used to straight through joints. Tinning is provided to give better finish, to avoid oxidisation and to achieve maximum corrosion protection.