Instrumentation & Signal Cable

Instrumentation cable

These are suitable for measurement & control in the field of electronics.Special application of these cables is their suitability for maxi-termi point connections. Instrumentation cables provide vital communication link between sensing device & read out equipment for Analog & Digital signals.

Thermocouple Extension / Compensating Lead Cables :

Voltage Grade - upto 1100V
Cable Code - KX, KX(A), TX, JX, EX, SX/RX, BX, NX, UX, WX
Construction - Single or Multiple Pairs
Range - 16 AWG / 18 AWG / 20 AWG / 20 AWG upto 20 pair

High Temperature / Teflon Cables :
These cables will be insulated and sheathed with Fiber Glass or PTFE based on specific requirement

Heating Cables - HC3 -( for industries and hazardous areas ) :

Thermo heating cable HC3 are the hardy and tough heating cable.when the ambient runs low, strap our workhorse heating cable and keep the fluid flow. Heating cable HC3 maintains temperature in pipelines and storage tanks to keep fluids in flow state.

Construction :

Heating Cable HC3 is a series type heating cable with single conductor (multistand , spiraled) heating element with a primary PTFE (teflon)  insulation, metal braid and an outer PTFE sheath.Each length of heating cable HC3 requires termination kits with cold lead for power connection.

Features :

Standards  -  Tested to IEC 62086-1 requirements.
Approvals  - ATEX certified for use in hazardous area
Uniform Heating - Generates the same rated rated heat output all along its length
Easy to install - Requires no special tools & tackles to install

Range :

Standard manufacturing linear resistance (ohms/KM) are below and are supplied in reels of 500 to 1000M lengths 0.8 / 1.1 / 1.8 / 2.9 / 4.4 / 7 /10 / 11.6 / 15 /17.8 / 25 / 31.5 / 50 / 68 / 2160 / 2400 / 3000 / 4000 / 5600 / 8000.