Flameproof & Weatherproof Aviation Obstruction Light fixture for installation in hazardous areas Div. 1 & 2 as per IS:5572 (Part-I) with superior powder coated epoxy finish and anti loosening type external hardware.
Type
LA series 31200
Type of protection
Ex d IIA/IIB as per IS: 2148
Certificate of Conformity
TC/H395 + V/1/1/667 + V/1/1/1081
Enclosure material
Die cast Aluminum alloy
Degree of protection
IP 55 as per IS:2147
Transparent part
Heat and impact resistant toughened
Lamp Holder
Porcelain E - 27
Rating
100 Watt GLS T4
Voltage
Upto 250V, 50 Hz
Wire Guard
M.S. Galvanised
Cable Entries
2nos. ¾" ET(BSC)
Gasket
Neoprene
Hardware
Stainless Steel
Options
Aviation Obstruction light fixture are also available in Ex-e design (CMRI Cert. No. V/1/5/563) & for Ex-d IIC design on CMRI Batch test basis.
Increased safety & Weatherproof Control Gear box for HPMV/HPSV lamps to be used in hazardous areas Div 2 as per IS:5572 (Part-I) This enclosure is tested for restricted breathing as per IS:8224 With superior powder coated epoxy finish and Non falling type hardware.
Type
LC 21401
Type of protection
Ex e as per IS: 6381
Certificate of Conformity
V/1/5/1017 - For LC 21401 V/1/5/1471 - for CG / 417
Flameproof & Weatherproof Well Glass Light fixture for installation in hazardous areas Div. 1 & 2 as per IS:5572 (Part-I) with superior powder coated epoxy finish and anti loosening type external hardware & J hook for holding the glass while relamping, fin structure for better heat dissipation and mechanical strength.
Type
LW 31200
Type of protection
Ex d IIA/IIB as per IS:2148
Certificate of Conformity
TC/P/H655
Enclosure material
Pressure Die Cast Aluminum alloy
Degree of protection
IP 65 as per IS 13947 (Part I)
Transparent part
Heat and Impact resistant toughenedType-A dome glass as per IS: 2206 (Part1)Porcelain E-27
Flameproof & Weatherproof Well Glass Light fixture for installation in hazardous areas Div. 1 & 2 as per IS:5572 (Part-I) with superior powder coated epoxy finish and anti loosening type external hardware & J hook for holding the glass while relamping.
Type
FCG/W/103-1
Type of protection
Ex d IIA/IIB as per IS:2148
Certificate of Conformity
V/1/1/243
Enclosure material
Die Cast Aluminum alloy
Degree of protection
IP 55 as per IS:2147
Transparent part
Heat and impact resistant toughened Type-A dome glass as per IS: 2206 (Part 1)
Flameproof & Weatherproof Well Glass Light fixture for installation in hazardous areas Div. 1 & 2 as per IS-5572 (Part-I) with superior powder coated epoxy finish, anti loosening type external hardware & J hook for holding the glass while relamping. Fin structure for better heat dissipation and improved mechanical strength.
Type
FCG/W/1003-3
Type of protection
Ex d IIA/IIB as per IS:2148
Certificate of Conformity
V/1/1/1276
Enclosure material
Aluminum alloy
Degree of protection
IP 55 as per IS:2147
Transparent part
Heat and impact resistant toughened Type A dome glass as per IS: 2206 (Part 1)
Flameproof & Weather proof Well Glass Light fixture with in built Control Gear for installation in hazardous areas Div 1 & 2 as pere IS 5572 (Part-1) with superior powder coated epoxy finish, fins structure on body for better heat dissipation, built in vibration proof anti loosening type terminal block, anti loosening external hardware & J hook for holding the glass while relamping.
Flameproof & Weatherproof Well Glass Light fixture with in built Control Gear for installation in hazardous areas Div. 1 & 2 as per IS:5572 (Part-I) with superior powder coated epoxy finish, anti loosening type external hardware & chain for holding the glass while relamping. Fin structure for better heat dissipation & improved mechanical strength.
Flameproof & Weatherproof Well Glass Light fixture for installation in hazardous areas Div. 1 & 2 as per IS:5572 (Part-I) with superior powder coated epoxy finish, anti loosening type external hardware & chain for holding the
Type
LW 61200
Type of protection
Ex d IIA/IIB as per IS:2148
Certificate of Conformity
On batch test basis.
Enclosure material
Aluminium alloy
Degree of protection
IP 65 as per IS:13947 ( Part I)
Transparent part
Heat and impact resistant toughened Type A dome glass as per IS: 2206 (Part 1)
Increased Safety & Weatherproof Well Glass Light fixture for installation in hazardous areas Div. 2 as per IS:5572 (Part-I). The enclosure is tested for restricted breathing as per IS:8224. It has a superior powder coated epoxy finish, Antiloosening type external hardware, J hook for holding the glass while relamping and fin structure for better heat dissipation and mechanical strength.
Type
W/403-3
Type of protection
Ex e as per IS: 6381
Certificate of Conformity
V/1//5/1469
Enclosure material
Aluminium alloy
Degree of protection
IP 55 as per IS:2147
Transparent part
Heat and impact resistant dome glass.
Lamp Holder
Porcelain enclosed break, ES-40 lamp holder certified by CMRI
Increased Safety & Weatherproof Well Glass Light fixture with in-built Control Gear for installation in hazardous areas Div. 2 as per IS:5572 (Part-I). The enclosure is tested for restricted breathing as per IS:8224.It has a superior powder coated epoxy finish, antiloosening type external hardware, and a J hook for holding the glass while relamping.
Type
W/403-4
Type of protection
Ex e as per IS: 6381
Certificate of Conformity
V/1//5/1601
Enclosure material
Aluminium alloy
Degree of protection
IP 55 as per IS:2147
Transparent part
Heat and impact resistant dome glass.
Lamp Holder
Porcelain enclosed break, ES-40 lamp holder certified by CMRI
Increased Safety & Weatherproof Well Glass Light fixture for installation in hazardous areas Div. 2 as per IS:5572 (Part-I). The enclosure is tested for restricted breathing as per IS:8224. It has a superior powder coated epoxy finish, Antiloosening type external hardware, and J hook for holding the glass while relamping. Fin on body for better heat dissipation and mechanical strength.
Type
LW 21202
Type of protection
Ex e as per IS: 6381
Certificate of Conformity
TC/H192
Enclosure material
Die Cast Aluminum alloy
Degree of protection
IP 67 as per IS:2147
Transparent part
Heat and impact resistant dome glass.
Components
1. Copper ballast 2. P.F. improvement capacitor 3. Ignitor ( for HPSV lamp)
Increased Safety & Weatherproof Well Glass Light fixture with in-built Control Gear for installation in hazardous areas Div. 2 as per IS:5572 (Part-I). The enclosure is tested for restricted breathing as per IS:8224.It has a superior powder coated epoxy finish, antiloosening external hardware, and a J hook for holding the glass while relamping. Fins structure for better heat dissipation and mechanical strength.
Type
LW 21250
Type of protection
Ex e as per IS: 6381
Certificate of Conformity
TC/P/H703
Enclosure material
Die Cast Aluminum alloy
Degree of protection
IP 65 as per IS:13947 (Part I)
Transparent part
Heat and impact resistant dome glass.
Components
1. Copper ballast 2. P.F. improvement capacitor 3. Ignitor ( for HPSV lamp)
lflameproof & weatherproof level gauge illuminator for use in hazardous areas div. 1 & 2 as per is:5572 part-i with superior powder coated epoxy finish.
type
il series
type of protection
ex d iia/iib as per is:2148
certificate of conformity
tc /h465
enclosure material
die cast aluminum alloy
degree of protection
ip 66 as per is"2147
transparent part
heat and impact resistant toughened glassas per is: 2206 (part 1)
lamp holder
porcelain e - 27
rating
15w gls – t5 'y' 25w gls – t5 'y'
voltage
upto 250v, 50 hz
wire guard
m. S. Galvanised
cable entries
2nos. ¾”et(bsc)
gasket
neoprene
hardware
stainless steel
options
this luminare is also available in ex-d iic ip65 design (tc/h453), batch tested by cmri
Flameproof & Weatherproof Reaction vessel lamp for illuminating boilers, containers and agitators used in hazardous areas Div. 1 & 2 as per IS:5572 (Part-I) with superior powder coated epoxy finish and fin design for better heat dissipation.
Type
RV/103-1
Type of protection
Ex d IIA/IIB as per IS:2148
Certificate of Conformity
V/1/1/349
Enclosure material
Die cast Aluminum alloy
Degree of protection
IP 55 as per IS:2147
Transparent part
Heat and impact resistant toughened glassas per IS: 2206 (Part 1)
Lamp Holder
Porcelain E - 27
Rating
60W GLS – T6 'Z' 100W GLS – T4 'Y'
Voltage
Upto 250V, 50 Hz
Switch
16A, DP, ON-OFF, 250V AC 50Hz
Cable Entries
2nos. ¾" ET(BSC)
Gasket
Neoprene
Hardware
Stainless Steel
Options
This Luminare is also available in Ex-d IIC IP-65 design, batch tested by CMRI.
Explosion protected light fitting suitable for Zone 2 hazardous area. The state of art design ensures high ingress protection, reliable quality, high luminious efficiency, low energy loss and convenient maintainance. It has added features like centralized mechanical locking facility, acid & alkali resistant, light weight and provided with electronic ballast, and an optional limit switch
Emergency light fixture are necessary in event of failure of the general lighting systems in hazardous areas. The individual battery emergency light fitting EL 11 PL is used for illuminating emergency exit routes, and critical operation areas of a plant
Type
EL 11 PL
Type of protection
Ex d IIC T6 as per IS:2148
Certificate of Conformity
CMRI/TC/P/H390
Enclosure material
Aluminium alloy
Transparent part
Borosilicate glass tubev
Rated Voltage
230V ,50 Hz
Degree of protection
IP 67 as per IS:2147
Permissible ambient temperature
-5 degree C to + 40degree C
Lamps
1 No. 11w compact fluorescent lampv
Batteries
Nickel cadmiun 4 Ah
Indicating Lamps
Red and Green LED Type
Cable Entries
2nos. ¾" ET(BSC)
GasketNeoprene
Neoprene
Options
This luminare is also available in Ex proof Design Ex d IIA and IIB, IP65 Type tested by CMRI (TC/H 837) Ordering details
Flameproof & Weatherproof Flood Light fixture for installation in hazardous areas Div. 1 & 2 as per IS:5572 (Part-I) with superior powder coated epoxy finish and better quality Internal reflector.
Type
LF series
Type of protection
Ex d as per IS: 2148
Certificate of Conformity
TC/1627 (For LF31400 ) TC/H1109 ( For LF31200 )
Enclosure material
Die cast Aluminum alloy
Degree of protection
IP 65 as per IS:2147 (For LF31400) IP 67 as per IS:2147 (For LF31200)
Transparent part
Heat and impact resistant toughened Type A glass as per IS: 2206 (Part 1)
Lamp Holder
E-40 ( For LF 31400) E-27 ( For LF 31200)
Internal Reflector
Aluminum anodised
Cable Entries
1no. ¾" ET(BSC) with cable gland
Gasket
Neoprene
Hardware
Stainless Steel
Voltage
Upto 250V, 50 HzUpto 250V, 50 Hz
Options
This luminare is also available in Ex-d IIC Design batch tested by CMRI.
Flameproof & Weatherproof Control Gear box for HPMV/HPSV lamps to be used in hazardous areas Div. 1 & 2 as per IS:5572 (Part-I) with superior powder coated epoxy finish and Non falling type hardware.
Junaid Industries Manufacturing and supplying a range of LED lights, curved tail lights, reading lights, bearth reading lights, center high mounted LED stop lights, HT marker lamps, curved tail lamps and center high mounted ledstop light.
Sam Signs & Sam LED Manufacturer and supplier of LED street lights, LED tube lights, LED cove lights, LED strip lights, LED down lights and LED panel lights.
ES EM Owstar Import Export Private Limited Manufacturing and supplying emergency light that includes small emergency light, table lamp, handheld emergency light, LED emergency light, battery operated emergency light and electric emergency light.
Processing...
