The Ferrocare's low vacuum dehydration unit is a comprehensive process to remove water and gases from oil at temperature lower than 53° C, which reduces oxidation during the dehydration process. The LVDH-50 is a quick, inexpensive and automatic system that overcomes centrifuging’s major drawbacks and especially that of oxidation and emulsified water retention. Some of its technical features are:

Features

• Totally automatic operation
• Reduces water content in a single pass by 0.25% - 1.5% depending on inlet oil temperature
• Ultimate water removal through oil recirculation - to zero-free water content or to 50 % below saturation level
• Removal of soluble gases and air - to 50% of saturation level

The Oil Filterstion System we provide is more efficient in cleaning process as compared to mechanical filteration. When small particles enter clearances between mating parts they break the supporting oil film which causes wear and tear. To eliminate these damages, Electrostatic Liquid Cleaner is used which removes all sizes of particles efficiently.

Electrostatic forces remove all types of particles such as metal wear, paper wood, plastic and rubber. Some of the advantages are:

Advantages

• No clogging or pressure drop
• Fit-and-Forget-no operator attendance required
• Same collector element removes even the smallest of contaminants
• Dramatically reduces downtime on hydraulic circuits
• Keeps oil cleaner than new oil, throughout the oil change period
• Can extend the oil drain intervals
• Removers particulate matter from any non conductive fluid
• Removes sludge & varnish: eliminates the problem of sticky movement
• Typically runs 1,500 hours before a collector change
• Collection area in sq. meters, Which no filter can provide

We manufacture premium quality Coolant Fitleration system, which are used for steel industries to keep machineries cool and free from contamination.

Advantages

• Design of maintenance friendly
• Durable
• Economical product
• Easy Maintenance

We offer our customer these Gear Box Oil Filteration Systems which are very beneficial for removing the contamination from gear boxes. With its facilities to get attached directly to the gearbox it helps to remove carbon deposits more efficiently.

The PC oil coolant is perfect for proactive maintenance and oil-line monitoring with Instant led readout computer interface and trending software. It is a low cost solution and can be used as an alarm to notify you of any change in contamination levels. It is also considered ideal for plotting ISO cleanliness trends.

Advantages

• Gives you direct particle count and ISO codes online and on your PC/handled device.
• Instantly spot contamination level changes and avoid system damage.
• Adapts itself to trend monitoring through RS232 / RS485 / analog
• Highly affordable and can be dedicated to critical systems

The abrasives supplied by us are manufactured by the world’s largest producer Noritake. The diverse range of products we offer is:

• Conventional and ceramic grinding wheels
• Diamond Wheels roperties, such as, carbide and scale.
• Conventional honing stones
• CBN Honing Stones
• CBN wheels

With the latest technological advancement and growing demands of our customers we develop machines which have the following features:

• Higher wheel speeds & feed rates
• Reduced dressing frequency
• Improved surface finish
• Increased change over time interval
• Consistent quality.

The copper moulds delivered by us are made by the well-known Japanese company CHUETSU, one of the largest producers of copper moulds in the world.

• Moulds for Slab Casting of Steel
• Copper Rod Casting Ring Moulds for casting of copper wire ring rods.

These product help to achieve increase casting speed and consistent product quality. The total analysis of current casting conditions is undertaken for further improvement of the products for achieving the objectives of increased casting speed and consistent product quality. The steel mills in Japan and Korea operate plants at high output speeds.

We offer High Speed Steels to our customers that are we procure from Nachi. These are very useful for cutting tools, ejecting pins, piercing punches etc. Nachi provides us with superior quality high-speed steel.

Features

• Hardened High Speed Steels from 0.3 mm dia. rounds and flats in 2000 mm lengths in M2 / M35 / M42 & ASP grades.
• Carbide wires which includes the thinnest of 0.04mm dia
• Hardened Stainless Steels from 1mm to 13mm dia. in SUS420JS Grade.

We export our superior quality Hydraulics - Pumps & Valves from Nachi - known for its experience in manufacturing superior range of Hydraulics Valves & Pumps. These used by various industries like marine, energy, waste recovery, power for construction and mining, agriculture, industrial machinery, material handling etc.

Applications:

• Boilers Hydraulic Pressure Testing.
• Pressure Vessels Hydraulic Pressure Testing.
• Tubes Hydraulic Pressure Testing.
• Pumps Casting Hydraulic Pressure Testing.
• Pipelines Hydraulic Pressure Testing

Hydraulic valves control and directs the oil from the time it leaves, the pump until it starts on its return to the reservoir in a hydraulic circuit.

Hydraulic valves are built in several pressure ranges as used for various industrial purposes. Various types of valves are used in hydraulic systems to regulate or control the flow medium. The valves are used to control:

• Blocking or stopping of flow
• Flow quantity
• Direction of flow
• Pressure of flow media

The premium quality High Speed Steels, Special Steels, Alloy Steel, Cutting Tools, Hydraulic Equipment, Bearings and Machines that we export are manufactured by Nachi-Fujikoshi Corp who is Japan's most respected manufacturer. Nachi has pioneered in the process of continuous heat treatment of steel bars.

Applications

• Vanes for hydraulic vane pumps and rotary refrigeration compressors.
• Surgical drills for hardened SS materials.
• •Dot pins of dot matrix print heads, EDM Wires for Carbide wires

Technical specifications

• Improved surface finish
• Hardened Stainless Steels from 1 mm to 13-mm dia. in SUS420JS Grade.
• Hardened High Speed Steels from 0.3 mm dia. rounds and flats in 2000 mm lengths in M2 / M35 / M42 & ASP grades.
• Carbide wires which include the thinnest of 0.04 mm dia.

We export Everloy Descaling Nozzle from Kyoritsu Gokin, a reputed company known for manufacturing Descaling Nozzle. Ever since they first developed a descaling nozzle which is made of cemented carbide, Kyoritsu Gokin is considered as a pioneer and has earned a respectable name in the across the globe.
The EVERLOY brand is known for providing premium quality nozzles for continuous casting steel slabs for:

• Excellent surface finish of cold rolled sheets.
• Improved descaling