Available with us are Cartridge Filter System that are precision engineered and designed to perfection.These are fabricated from the best grades of raw materials and offers wide range of flow capacities & contaminant holding capacities.Available in different diameters to accommodate from 1 to 200 cartridges around, these filters are normally used as polishing filter in almost all process industries. Further these are also offered in customized ranges as per the requirements and specifications of the clients.
Operations:
- Contaminated fluid enters the housing and is distributed evenly around the filter cartridges.
- Filtration takes place from outside to inside.
- Solids are collected on the outside of filter cartridges & clear filtrate collected at outlet.
Features & Benefits:
- Low pressure drop
- High dirt holding capacity
- zero hold up design
- Permanently piped housing are opened without special tools and without disturbing the piping
- Machined cover gasket groove provide positive O-Ring sealing
- Easy clean ability
- In-line inlet and outlet high flow rates
- Positive sealing arrangement to avoid bypassing
- Suitable for double open end (DOE), Code 7 (226 O-Ring) & 222
- O-Ring type filter cartridge
- Accommodates 10", 20", 30", 40", 50¿ & 60¿ long filter cartridges.
- End connections for ¾" to 24" pipe
- V posts or threaded center posts
- Quick opening tri clovers design
- Easy to operate & low maintenance
- Low down time
- Flow rate up to 2000 m3/hr
- Custom design services
- Housings are permanently piped
- All housings made from SS 316 l, SS 316 & ss304 are mirror polished & electro polished to resist adhesion of dirt and scale
- Carbon steel housings are sand blasted, epoxy coated & finally painted with two coats of synthetic enamel
- ASME code stamp available
- Duplex / Triplex / Jacketed cartridge filter unit designs are available
- High temperature & high pressure design are available
- Sanitary fittings and construction
- Higher pressure rating
- Housings of alloy steel
- Corrosion allowances
- Steam jackets
- Special outlet locations
- Optional cartridge sealing methods 226, npt, etc
- High temperature gasket designs
Technical Specifications:
Sizes (Cartridge filter housings suitable for):
- 1 No. To 200 Nos. Of Cartridges in Single Housing
- 2" , 2.5" , 4" , 6" & 8" diameter of cartridge
- 10" , 20" , 30" , 40" , 50" & 60" long filter cartridge
Cartridge filter housing suitable for filter cartridges of :
- Double Open End (DOE) Type
- Code 7 (226 O Ring) Design
- Code 3 (222 O Ring) Design
- NPT Threaded Connection Type
Flow Rate : Capacity Up to 2000 m3 /hr
Material of construction:
SS 316L,SS 316,SS 304,Carbon Steel (All Grade), Mild Steel, Alloy Metals,
Polypropylene, lead Lining, Rubber Lining, Teflon Lining
Gasket / O Ring Material:
- Neoprene, Nitrile, Silicone, Viton, Buna N, EPDM, PTFE
End Connections Available:
- NPT / BSP Threaded
- Flanged Table E / Table F
- ANSI B 16.5 Flanged
- DIN Standard
- Tri Clover Adaptors
- SMS /Dairy End Connection
Processing...
