We offer a wide range of Compressed Filter that is ideal for removal of dirt, dust, rust, condensates, moisture contents, oil impurities & exhaust fumes. Fabricated from premium quality raw materials like SS 316, SS 304, carbon steel or aluminum procured from reliable sources, they are designed to perfection based on the following parameters:
 

• Flow requirement
• Line size
• Working pressure
• Working temperature
• Level of filtration rating

 
In order to ensure desired filtration level the Filter elements are made of verities of selective fiber media. Further we successfully cater to our esteemed clients all over the globe by fabricating our range as per their designs and requirements.
 
Following are the varieties of our Compressed Air Filter:
 

• Particle removal filter (for removal of dirt, dust, rust & other metal particles up to 1 micron)
• High efficiency filter (for removal of oil & moisture contents and fine particles up to 0.01 micron)
• Carbon filter (for removal of oil vapor, test & odor)

 
Operation
 

• Unfiltered compressed air enters in to filtration systems with positive pressure
• Then it passes through selective filter media to remove dirt, dust, and moisture & oil contaminants.

 
 
Features & Benefits
 

• High flow rate
• Low pressure drop due to pleated configuration
• High efficiency due to surface filtration
• Reduction in downtime & maintains
• Easy to install & remove
• Choice of filter media & filter housings

 
 
Technical Specifications
 
Capacity: Up to 95,000 NM3/hr & more
 
MOC of System: SS 316, SS 304, MS/CS, Aluminum
 
MOC of Element:
 

• SS 316L sintered media
• Sintered ceramic
• Sintered polyethylene
• Activated carbon
• Synthetic fiber media
• Borosilicate glass fiber

 
We are engaged in the manufacture and export of Compressor OEM Filters that are high in performance and low on maintenance. Further these are fabricated from the best grades of raw materials and are appreciated worldwide. Our adroit team of quality controllers who check every component for precision and quality stringently checks them. We can also offer our filters as per the specifications and requirements of our clients.
 
Following are the essential features of our exclusive array:
 

• Durable
• Flawless
• Highly efficient
• Dimensionally accurate
• Available in competitive price
• Retrofit equivalent to Atlas Copco, IR, ELGI, Kirloskar, K G Khosla etc.

 
Our Compressor OEM Filters are suitable for Screw & Reciprocating Compressor like:
 

• Air Filter
• Oil Filter
• Air Oil Separator

Available with us is a wide assortment of Hydraulic & Lube Oil Filter that is widely used in the filtration of oil at various operating conditions and can remove moisture contents from oil. They are efficient in operating conditions like high pressure, low pressure, highly viscous oil, or highly contaminated oil. Further we endeavor to offer satisfactory services to our global clients offering them customized range of filters.
 
The wide variety of Hydraulic filters includes the following:
 

• Suction strainer
• Return line filter
• High pressure filter
• Medium pressure filter
• Low pressure filter
• Offline & portable mobile filter unit
• Replacement filter elements
• Moisture removal filter

 
Owing to their superior quality, durability, flawlessness and dimensional accuracy our quality filters are suitable for different companies such as:
 

• PALL
• HYDAC
• INTER NORMAN
• Parker

 
Following are the types of Filter Media:
 

• Borosilicate glass fiber media
• Glass fiber with lamination
• Resin impregnated paper media
• SS wire mesh
• Synthetic fiber media

 

 
We are engaged in the export of Gas Filter that is fabricated from the best grade of raw material that is procured from reliable sources. The filter houses can be fabricated using SS 316, SS 304, carbon steel or aluminum. Our qualitative gamut is appreciated worldwide and extensively used for removal of dirt, dust, rust, condensates, moisture contents, oil impurities & exhaust fumes. These are dexterously designed based on the following:
 

• Flow requirement
• Line size
• Working pressure
• Working temperature &
• Level of filtration rating.

 
We use different varieties of selective fiber media in the manufacture of filter elements to ensure desired filtration level. These are beneficial for replacement of existing vessels and new design vessels. Further these can also be offered as per the specifications of our esteemed clients all across the globe providing high filtration area, lower pressure drop & extended service life of filter element. Moreover, the filter housings for these filters are available in standard design and also offered in pressure vessel design codes like ASME SEC VIII DIV I & others. 
 
The different categories of our manufactured gas filters are:
 

• Particle removal filter (For removal of dirt, dust, rust & other metal particles up to 1 micron)
• High efficiency filter (For removal of oil & moisture contents and fine particles up to 0.01 micron)
• Carbon filter (For removal of oil vapour, test & odour)

 
Features & Benefits:
 

• High flow rate
• Low pressure drop due to pleated configuration
• High efficiency due to surface filtration
• Reduction in downtime & maintains
• Easy to install & remove
• Choice of filter media & filter housings

 
 
Technical Specifications
 
MOC of Housing- SS 316, SS 304, MS/CS, Alloy Metals
 
MOC of Element-

• SS 316L sintered media
• Stainless steel wiremesh
• Sintered ceramic
• Sintered polyethylene
• Activated carbon
• Synthetic fiber media
• Borosilicate glass fiber

 
 
 
 
 

Our Pleated Air Filters are fabricated from 100 % polyester media with different coatings. These are extensively used as dust collection system. These are designed to perfection and have spun bonded media in different pleated depths and height to accommodated desired filtration area. The spun bonded media offers surface filtration, very high throughputs & lower pressure drop across the
Filter. The pleated configuration in our filters offers almost 3 to 4 time, high filtration area compared to convention bags. Available in market leading prices these pleated air filters can also be manufactured as per the specifications and requirements of our esteemed clients all across the globe.
 
 
Construction
 

• Pleated spun bonded filter media placed in a cylindrical configuration with support of GI/stainless steel support & encapsulated with EPDM or metal end caps to form a pleated dust collection bags.
• Longitudinal joints of pleated bas are ultrasonically fused for leak proof & very stable design.
• The end caps are configured to mount as clean side or dirt side fitment.
• In case of metal caps these bags are supported with soft sponge rubber sealing to ensure positive sealing of filter while fitment.

 
Features & Benefits
 
 

• Filter Area 3 To 4 Times Larger Than Traditional Filter Bag
• Open Pleat Spacing
• Low consumption of compressed air (for cleaning)
• High efficiency due to surface filtration
• Reduction in downtime & maintains
• Easy to install & remove
• Top and Bottom in EPDM, Natural Rubber or Metal end caps
• Leak proof design
• Very stable do not break or fall through sheet
• Cages & venture are integral part of bags, hence no cages or venture are required

 
 
Technical Specifications
 
Filter media: Spun Bonded Polyester Media
 
Area weight of filter media
 

• 170 gms/m2
• 200 gms/m2
• 260 gms/m2

 
Coating
 

• PTFE coating for oil & moisture removal
• Aluminum coating for antistatic application
• Stainless steel coating for antistatic application
• Fire retardant coating
• PTFE lamination for very stick dust

 
Sizes

• 160 mm x 500 mm Long
• 160 mm x 1000 mm Long
• 160 mm x 1400 mm Long
• 160 mm x 2000 mm Long

 
Filtration area: 0.96 m2 to 5.5 m2
 

 
Available with us are Cartridge Filter System that are precision engineered and designed to perfection.These are fabricated from the best grades of raw materials and offers wide range of flow capacities & contaminant holding capacities.Available in different diameters to accommodate from 1 to 200 cartridges around, these filters are normally used as polishing filter in almost all process industries. Further these are also offered in customized ranges as per the requirements and specifications of the clients.
 
 
Operations:
 

• Contaminated fluid enters the housing and is distributed evenly around the filter cartridges.
• Filtration takes place from outside to inside.
• Solids are collected on the outside of filter cartridges & clear filtrate collected at outlet.

Features & Benefits:
 

• Low pressure drop
• High dirt holding capacity
• zero hold up design
• Permanently piped housing are opened without special tools and without disturbing the piping
• Machined cover gasket groove provide positive O-Ring sealing
• Easy clean ability
• In-line inlet and outlet high flow rates
• Positive sealing arrangement to avoid bypassing
• Suitable for double open end (DOE), Code 7 (226 O-Ring) & 222
• O-Ring type filter cartridge
• Accommodates 10", 20", 30", 40", 50¿ & 60¿ long filter cartridges.
• End connections for ¾" to 24" pipe
• V posts or threaded center posts
• Quick opening tri clovers design
• Easy to operate & low maintenance
• Low down time
• Flow rate up to 2000 m3/hr
• Custom design services
• Housings are permanently piped
• All housings made from SS 316 l, SS 316 & ss304 are mirror polished & electro polished to resist adhesion of dirt and scale
• Carbon steel housings are sand blasted, epoxy coated & finally painted with two coats of synthetic enamel
• ASME code stamp available
• Duplex / Triplex / Jacketed cartridge filter unit designs are available
• High temperature & high pressure design are available
• Sanitary fittings and construction
• Higher pressure rating
• Housings of alloy steel
• Corrosion allowances
• Steam jackets
• Special outlet locations
• Optional cartridge sealing methods 226, npt, etc
• High temperature gasket designs

 
Technical Specifications:
 
Sizes (Cartridge filter housings suitable for):

• 1 No. To 200 Nos. Of Cartridges in Single Housing
• 2" , 2.5" , 4" , 6" & 8" diameter of cartridge
• 10" , 20" , 30" , 40" , 50" & 60" long filter cartridge

 
Cartridge filter housing suitable for filter cartridges of :

• Double Open End (DOE) Type
• Code 7 (226 O Ring) Design
• Code 3 (222 O Ring) Design
• NPT Threaded Connection Type

Flow Rate : Capacity Up to 2000 m3 /hr
 
Material of construction:
SS 316L,SS 316,SS 304,Carbon Steel (All Grade), Mild Steel, Alloy Metals,
Polypropylene, lead Lining, Rubber Lining, Teflon Lining
 
Gasket / O Ring Material:
 

• Neoprene, Nitrile, Silicone, Viton, Buna N, EPDM, PTFE

 
End Connections Available:
 

• NPT / BSP Threaded
• Flanged Table E / Table F
• ANSI B 16.5 Flanged
• DIN Standard
• Tri Clover Adaptors
• SMS /Dairy End Connection

 

 
We export a wide range of Bag Filter System that is adequately designed for optimum filtration performance.Our qualitative gamut is extensively used in various process industries and provides filtration solution for a broad variety of fluid.Available in customized ranges they are useful for filtering large volumes of high viscosity liquids.Our in house design unit along with the CAD/CAM facility aids in the smooth production of our array fabricated of filter housing, filter bags, internal cage to support bags, positive sealing arrangement & choice of end connections.
 
 
Features & Benefits:
 

• High flow rates
• Low pressure drop
• High dirt holding capacity
• Positive sealing arrangement to avoid bypassing
• Suitable for PP Collar, Rigid Ring & Snap Band Bags
• Quick opening Tri Clovers & Fly nut design
• Easy to operate & low maintenance
• Low down time
• Flow rate up to 2000 m3/hr
• Custom design services
• Large-area, heavy-duty baskets
• Housings are permanently piped
• Covers are O-Ring sealed
• All housings made from SS 316 L, SS 316 & SS 304 are mirror
• polished to resist adhesion of dirt and scale
• Carbon steel housings are sand blasted, epoxy coated & finally painted with two coats of synthetic enamel
• ASME code stamp available
• Multiple bag filter / Duplex bag filter / Jacketed bag filter unit
• High temperature & High pressure design are available
• The internal support ensures bags will not burst as high differential pressures build up during operation
• Special option include filter bag hold-down devices, sanitary, construction different outlet connections, higher pressure ratings, extra-length legs, heat jacketing and adapters for holding filter bags.

 
Operations:
 

• Unfiltered fluid enters the housing and is distributed evenly around the filter bags. Filtration takes place from inside to outside.
• Solids are collected on the inside of filter bag for easy removal.
• The filtered fluid then exits through the outlet pipe.

 
Technical specifications :
 
Sizes :
 
Bag Filter System Suitable for
 

• 4" x 10" Long Bag Filter

• 4" x 20" Long Bag Filter
• 7" x 17" Long Bag Filter
• 7" x 32" Long Bag Filter
• Multiple Bag Filter System

 
 
Flow Rate :
Capacity: Up to 2000 m3 /hr
 
Bag Filter Suitable For Bag Configuration:

• PP Collar Bag
• Rubber Collar Bag
• Snap Band Bag
• Rigid Ring Bag
• Flange Collar Bag

Multiple Bag Filter System Suitable for

• 3 Nos. Of  7" x 32" Long Filter Bag
• 4 Nos. Of  7" x 32" Long Filter Bag
• 5 Nos. Of  7" x 32" Long Filter Bag
• 7 Nos. Of  7" x 32" Long Filter Bag
• 9 Nos. Of  7" x 32" Long Filter Bag

 
Material of construction :

• SS 316L, SS 316, SS 304, Carbon Steel ( All grade), Mild Steel, Alloy Metals, Polypropylene, Lead Lining, Rubber Lining, Teflon Lining

Gasket / O Ring Material :

• Neoprene, Nitrile, Silicone, Viton, Buna N, EPDM, PTFE

End Connections Available:

• NPT / BSP Threaded
• Flanged Table E / Table F
• ANSI B 16.5 Flanged
• DIN Standard
• Tri Clover Adaptors
• SMS /Dairy End Connection

The basket Filter & Strainers offered by designed to perfection.They are fabricated from the premium quality raw material and conform to the international standards. Moreover, they permit the straining & filtering of a wide variety of fluids.The baskets are easy to clean and remove and constructed of filter housing, filter element supported with perforated cage, positive sealing arrangement to avoid any bypass.
 
Operation
 

• Unfiltered liquid enters the basket housing and passes down through them.
• Solid are contained inside / outside of basket depend upon design and removed when the unit is serviced.
• They are available with inside backwashing arrangement, where it does not require removing baskets for cleaning, often.
• Basket filters & strainers normally supplied with spring arrangement at top of filter element.
• This ensures any type of bypassing & confirms the position of basket, even in case of reverse flow.
• Fluid bypass around the basket is prevented by an optional O-Ring seal between the basket rim and the housing id.

 
Features & Benefits
 

• Large-area, heavy duty baskets
• Low pressure drops
• Housing are permanently piped
• Covers are O-Ring sealed
• Carbon steel, or stainless steel (304 Or 316) housing
• Easy to clean
• Option of inside backwashing
• Filtration rating available from 5 micron to 2000 micron & more
• ASME code stamp available
• High pressure rating design available
• Flow rate up to 2000 m3/hr
• Custom design services
• All housings made from SS 316 L, SS 316 & SS304 are mirror polished to resist adhesion of dirt and scale
• Carbon steel housings are sand blasted, Epoxy coated & finally painted with two coats of synthetic enamel
• Liquid displacers for easier servicing
• Duplex / Triplex & Jacketed units available
• High temperature & high pressure design are available
• Normally designed for free flow area through screen, 4 - 6 times pipe flow area

 
Technical Specifications
 

• Sizes: 1 Line Size To 24 Line Size & More
• Flow Rate: Capacity Up to 2000 m3 /hr & More

 
Material of construction
 

• SS 316L
• SS 316
• SS 304
• Carbon steel (all grade)
• Mild steel
• Alloy metals
• Polypropylene
• Lead lining with any metal
• Rubber lining with any metal
• Teflon lining with any metal

 
Basket element design available
 

• Single Cylinder Design
• Double Cylinder Design
• Multi Cylinder Design
• Pleated Element Design

 
Gasket / O Ring Material
 

• Neoprene
• Nitrile
• Silicone
• Viton
• Buna N
• EPDM
• PTFE

 
Choice of valve available
 

• Two way Ball Valve
• Three Way Ball Valve
• Butterfly Valve

 
End Connections Available
 

• NPT / BSP Threaded
• Flanged Table E / Table F
• ANSI B 16.5 Flanged
• DIN Standard
• Tri Clover Adaptors
• SMS /Dairy End Connection

 

We export a wide assortment of Molded Filter Housings that are manufactured as per the international standards and are in high demand not only in the domestic market but also in the foreign front. They are fabricated from best grade of raw material comprising of virgin polypropylene and provide leak proof sealing. Available in market leading prices they can also be offered in customized ranges. Our in house design unit along with the CAD/ CAM unit aids in the fruitful and adequate designing of our array as per the specifications of our esteemed clients.  
 
Features & Benefits 

• All Polypropylene Construction
• Optional Pressure relief button
• Mounting Bracket cap with four screw bosses for rigid mounting installations
• Optional Viton & Silicone O rings for Chemical Compatibility
• End Connections: ½ , ¾ , 1
• Accomplished by cap impression against top seated O ring in sump.
• The square thread closure allows for years of cartridges change out without failure.
• Thick walls and multiple ribs make these housings ideal for industrial applications.
• The clean look (FDA Grade plastics) and light weight also makes them preferred in residential and commercial uses.
• The polypropylene construction has excellent chemical resistance for use of most acids, alcohols, ammonia, oils, plating solutions, beverages & water

Technical Specifications

• Sizes (Suitable for 2.5¿ Diameter Filter Cartridge)
• Filter Housing End Connections- 10
• Long Standard Housing ½ , ¾ , 1- 20
• Long Slimline Housing ½¿ , ¾¿ , 1¿

The different types of Molded Filter Housings offered by us include:

• Polypropylene Standard Molded Housings
• Polypropylene Jumbo Molded Housings
• Transparent Molded Housings
• Transparent Jumbo Molded Housings

Specifications:

• Polypropylene standard moulded housings
  (Sizes : Suitable for 2.5" Diameter Filter Cartridge)

 

Sr.No.	Filter Housing	End Connections
(1)	10" Long Standard Housing	½" , ¾" , 1"
(2)	20" Long Slimline Housing	½" , ¾" , 1"

 
 

• Transparent standard moulded housings
  (Sizes :Suitable for 2.5" Diameter Filter Cartridge)

 

Sr.No.	Filter Housing	End Connections
(1)	5" Long Transparent Housing	¾"
(2)	10" Long Transparent Housing	¾"
(3)	20" Long Transparent Housing	¾"

 

• Polypropylene jumbo moulded housings
  (Sizes : Suitable for 4.0" Diameter Filter Cartridge)

 

Sr.No.	Filter Housing	End Connections
(1)	10" Long Jumbo Housing	1" , 1 ½"

The qualitative range of Filter Cartridges offered by us is spun bonded and are fabricated from 100% polypropylene fibers that are spun together to form a true gradient density from outer to inner surface. Available in market leading prices, they are offered in core and without core version. Our manufactured range conforms to the international standards and comprises of superior structure and polypropylene fibers that are blown continuous on central molded core, without the requirement of  binders, resins or lubricants. We can also manufacture our filter cartridges as per the demands and requirements of our valued customers.
 
Operation
 

• Unfiltered fluid passes through depth filter matrix, enables the progressive retention of finer particles.
• This provides high efficiency, high dirt retention & filter life.
• Fluid flows from outside to inside through filter media.
• Particulates are held securely in the filter matrix and clean fluid flows to the downstream side of cartridge.

 
The essential features of our array include the following:
 

• Free of surfactants, Binders and Adhesives
• Excellent flow with low pressure drop
• High dirt holding capacity
• High strength & pressure resistance
• 100 % Polypropylene for wide chemical compatibility
• One piece construction up to 1016 mm & more
• Nominal & absolute filtration rating
• Certificated by NSF42 and FDA CFR title 21.

Available with us are Liquid Filter Bags that are fabricated from the premium quality raw material procured from reliable sources. These offer optimum filtration performance and are fabricated using selected media and conform to the international standards. Our exclusive array offers credible solutions to various filtration problems. Our filter bags are effective in removing or filtering solid particulate from contaminated liquids and high viscosity fluids.  
 
The different types of media used for the fabrication of our array are:
 

• Needle felt
• Monofilament
• Multi-filament.

 
Features & Benefits
 

• High performance
• Filtration rating from 1 to 200 Micron
• Viscous fluid capability
• High flow rates
• Low pressure drop
• Broad chemical compatibility
• Positive sealing arrangement with choice of materials
• High dirt holding capacity
• Simple maintenance
• FDA & NSF Compliance

 
 
Construction
 

• After cutting, flat stock media is fabricated into the filter bag by double over stitching / ultrasonic fusing giving a strong and secure seam.
• A choice of materials for the seal/neck ring can be either galvanized, polypropylene or stainless steel.

 
Operation
 

• Filtration takes place as the liquid flows the inside of the filter bag to the outside.
• Needle felt filter bags utilize the reliable mechanisms of depth filtration and have a high dirt holding capacity.
• Mesh filter bags utilize the well proven mechanisms of surface filtration and are effective in removing large solid particulate or agglomerates from the liquid flow.
• Filter bag replacement is simple.
• All debris and contamination removed from the liquid is held inside the bag which lifted from housing after opening the top lid or bowl and disposed of in accordance with environmental regulations.

 
Technical Specifications
 
 

• Sizes	Ø 4" x 10" Long, Ø 4" x 17" Long, Ø 7" x 17" Long, Ø 7" x 32" LongCustomized Sizes Are Available
• Filtration rating	1, 5 , 10 , 20 , 50 , 100 ,200 Micron
• Filter Media	Polypropylene Polyester Nylon HDPE Nomex, Ryton
• Configuration	Fused (welded), Stitched
• Types	Single layered, Multi Layered

 
 
Inner Diameter
 

• Fused (welded)
• Stitched Types
• Single layered
• Multi Layered

 

We offer Filter Bag – Air that are adequately designed by our adroit professionals. They fabricate our array using best grade of raw materials. Further our exported filter bags are stringently checked by our quality controllers ensuring that only the best range is delivered to the market. Our Air filter bags are manufactured as per the international standards and are also offered in customized ranges and packaged as per the client requirement.
 
Filter media
 

• Non woven needle felt polyester
• Non woven needle felt polypropylene
• Aramide / Nomex / Conex
• Homopolymer Polyacrlicnitrile
• Polyacrylic
• PTFE
• P84
• PPS / Ryton

 
Available coating & treatment
 

• Silicone coating
• Antistatic treatment with carbon fiber
• Antistatic treatment with copper wire
• Antistatic treatment with stainless steel fiber
• Water & oil repellent
• PTFE coating
• PTFE laminated

 
Sizes
 
Available in different sizes such as cylindrical tube bags & pocket type bags and also offered as per the client requirement.
 
Configurations
 

• Snap band type
• Flange collar type
• Rubber cord type
• Customized