 |
Omnimark Moisture Analyzer |
|
|
Offering a wide range of Omnimark Moisture Analyzer. Our range includes mark-3 moisture analyzer, microwave moisture analyzer, select moisture analyzer and standard moisture analyzer.
|
 | |
| | Features | Uses |
- Effective heationg
- Accuracy in wight of heated compund
| Laboratory use of drying and weighing | Specifications: | Method of Measurement | Loss on drying via four infrared quartz cylinders | | Modular configuration | Control and Heater modules (Optional: up to 4 heater modules) | | Temperature setting/control | 30-210 °C in one degree increments via RTD sensor, +/- 1 °C | | Temperature steps | Programmable one or two with selectable ramp rate | | Standby temperature | 30-160 ° C in one degree increments with selectable equilibration time | | Temperature display | Display of both target and current temp at each stage of testing and standby | | Conserve mode clock | Programmable time by day of week to shut down and wake up analyzer | | Balance module design | Monolithic weighing cell with protective stainless steel cover | | Balance calibration | Internal calibration weight or external weights accepted for manual calibration | | Ideal weight | Audio and visual display for programmable target sample weight addition | | Target limit alert | Minimum and maximum programmable limits and screen alert when test done | | Program storage | 300 programs with unique settings, alphanumeric naming | | Result storage | 999 results with statistics: Average, SD, RSD, high and low | | Units of measure of results | Weight, %Moisture, %Solids, %Volatiles, Fuel Moisture, PPM, mg/L | | Endpoint determination | Actual slope, Calculation and Time mode | |  |  |  | | |  | | |
| | Microwave Moisture Analyzer | | Features | Uses | - Fast heating
- Quick accurate test results
- Simple one button operation.
- The instrument automatically captures the tare weight, initial and final weight.
- No pre-or post weigh or manual calculations required.
- Programmable storage capacity of up to 30 different materials.
- Smart keys for simple programming.
- Automated carousel system to ensure even heating of sample.
- Meets or exceeds ASTM, ISO, JIS Standards
| Ideal for Latexes, Paints, Varnishes, Inks, Coatings and adhesives | Specifications: | Method of measurement | Sensor which recognizes end of absorption of microwave by sample being tested coupled with weight difference determined by pre and post measurement of sample | | Power Setting | Programmable, up to 100% of 450 watts | | Balance Capacity | 30 grams | | Balance resolution | 0.0001 gram | | Display of results | 0.01% | | Working range | 5 to 100% Moisture | | Units of results | Moisture, Solids, Volatiles and Weight | | End point determination | Slope mode or Time ou | | Program Storage | 30 program settings, stored and recalled by name or number | | Data storage | 300 most recent tests with statistical package | | Printer | Internal, thermal graphic | | Input/output | One serial bi-directional and one serial uni-directional RS232 | | Power requirement | 115/230 V, 60/50 HZ | | Internal clock | Date and Time (US or International) and military or AM/PM | | Audible Tone | Selectable, short, long or off | | Unit dimensions | 21" X 21" X 13.25" | | Unit weight | 67 Lbs. | | Carrying case | Custom made for instrument with pull-out handle and wheels included at no charge | | Shipping dimensions | 26" X 26" X 17" | | Warranty | One year, parts and labor | | | | | | | | | |
| | Features | Uses | - Statistical evaluation of any series of tests can be performed by simply selecting the data from memory
- Fifty individual programs can be stored in memory.
- From powders to liquids the Select model will provide accurate results, typically in as little as three to 10 minutes.
- Select model moisture analyzer from Omnimark can be coupled with an external printer or computer
- Additionally, the Select can be run at remote sites, powered from a vehicle battery when coupled with the optional inverter offered by Omnimark.
| Laboratory use of heating, drying and weighing | | Specifications: | | Method of Measurement | Loss on Drying | | Heat Source | Halogen or infrared, Dark (ni-chrome) non-glass | | Temperature Setting | 30 - 230 C in one degree increments | | Standby Temperature | Programmable from ambient to 100C | | Heating Modes | Three programmable intervals with selection of ramp and rate | | Balance Capacity | 124 grams | | Display of Results | 0.01% / 0.001g | | Drying Program Storage | Fifty, custom with alphanumeric naming Units of Measurement: Weight, Percent Moisture, Solids, Dry Weight | | Endpoint Determination | Programmable by percent of weight over time or fixed time | | Security Lock | Multiple options for authorized programmers and Anti-theft | | Power Requirements | 115V or 230V | | Weight and Dimensions | 14lbs (6.5kg), 8.5"x 13.25"x 7" (21.6 x 33.7 x 17.8 cm) | | Warranty Period | Two years, parts and labor | | Options | Printer, Inverter, Carrying case, Validation Kit, In-use cover | | | | | | | | | |
| | Standard Moisture Analyzer | | Features | Uses | - Offer a simple and accurate means of moisture or solids analysis, combining a precision balance with halogen technology.
- Simplicity of operation by pressing only one button to run a test
- Customization of the ending criteria for each type of sample tested
- Fast results, five individual programs can be stored in memory
- Can be coupled with computers for printing of hard copies
- Can be run at remote sites, powered from a vehicle battery
| For laboratory use | Specifications: | Method of Measurement | Loss on Drying | | Heat Source | Halogen or Dark (ni-chrome) non-glass | | Temperature Setting | 30 - 230 C in one degree increments | | Standby Temperature | Programmable from ambient to 100C | | Heating Modes | Three heating program options; Soft, Standard and Boost | | Balance Capacity | 100 grams , Choice of Medium or High Balance Stability, as well as Filter Options. | | Display of Results | 0.01% / 0.001g | | Drying Program Storage | 20 programs, custom Units of Measurement: Weight, Percent Moisture, Solids, Dry Weight, and mg/l | | Endpoint Determination | Programmable by percent of weight over time or fixed time | | Display Language | Programmable in English, French or Spanish | | Security Lock | Multiple options for authorized programmers and Anti-theft | | Power Requirements | 115V or 230V | | Weight and Dimensions | 14lbs (6.5kg), 8.5"x 13.25"x 7" (21.6 x 33.7 x 17.8 cm) | | Warranty Period | Two years, parts and labor | | Options | Printer, Inverter, Carrying case, Validation Kit, In-use cover | | Statistics | Statistics Package, Test results will be stored in memory. | | | | | | | |
|
© Federal India Trading Company. All Rights Reserved (Terms of Use)