Forging and Bendng are featured methods to produce fitting from copper pipe.
It can be used with the rigid or flexible pipes.
Copper fittings are the good choice to pipe water,gas,central heating system,construction,house applications and marine.
These are mainly used as sanitary fittings,
Made from:Bar stock & forging.
Size:10 mm to 50mm.
Type:Plain,Buttwelded and Threaded.
Wall thickness:0.8mm to 1.5mm

A hose fitting is a type of fitting used to connect a hose to another fluid component.
It may be used for crimping on rubber pipe as an end fitting or as a connector between the two outlets/inlets.
It also ensures as a leak proof seal and is suitable for higher pressure application.
Material used:BRASS,C.S & S.S
Threads:BSPP/BSPT/NPSM/NPT/SAE
Made from:BARSTOCK/PIPE
Sizes:-3mm to 50 mm.
-1/8'' to 2''.

Jic Fittings are a type of compression fittng which is having 37 degree flare seating surface.
The seats provided in the Jic Fittings are larger than the seats in pipe swivel fittings.
It is similar in size and threading to 45 degree Flare SAE Fittings.
Jic fitting system mainly consist of 3 components that make a tubing assembly: Body,Nut & Sleeve
It is widely used as a Hose end in hydraulic application.
Material used:Brass,C.S.,Inconel & S.S.
Made from:BARSTOCK OR FORGED
size:1/8" to 1".

A fastner is a restraint that mechanically joins or affixes two or more objects together.
Types:screws,nuts,bolts,clips,washers,rivets and studs etc.
MOC:A105,A-106,BRASS,S.S.
STANDARD:ASTM OR BRITISH

Tube Fittings provides leak proof,torque free seal at all tubing connections & eliminate costly,hazardous leaks in instrumentation and process tubing.
They are designed for instrumentation and process control system tubing.Pneumstic or Hydraulic Installation Air Logic Systems,Chemical Handling,etc.
Single and Double ferrule Fittings are easy to used and interchangeable with any make of its type.
MOC:BRASS,C.S,INCONEL & S.S
THREAD :BSPP,BSPT,METRIC & NPT.
SIZE : 1/16" TO 1".
3MM TO 25MM

AIR HEADERS:

USED:HYDRAULIC,PNEUMATIC,STEAM & GAS APPLICATIONS.
MOC:C.S,S.S,F OR P SERIES
SCHEDULE:40,80,160 AND XXS.
TYPE:
TESTING:
SIZE:1" TO 4"
CONNECTIONS:4,6,8,10,12,14,16,18 & 20
THREADS:BSPT and NPT

CONDENSATE POT:

MOC :C.S,MONEL,S.S & F SERIES
TESTING:1000 TO 6000 PSI
CONNECTIONS:2,3,4,5 & 6
SIZE OF POT:1/2" TO 6"
THREADS:BSPT,BSPP & NPT.

SYPHON

MOC:C.S,S.S and F series.
Made From:Seamless/Non-seamless Pipe
Schedule:40,80,160 & XXS
Size:1/4" to 1"
End Connection:S/W,Screwed,BSP,NPT,MALE/FEMALE
or Swivel type

Thermowell

MOC:Brass & S.S
TYPE:S/W,SCREWED & WELDED.
THREAD: BSPP,BSPT,NPSM & NPT.
LONG:4",6",9",12",15",18",21",& 24".
SHANK:Straight,steeped & welded

Thermowell meltbolt

MOC:C.S. AND S.S.
MADE FROM:HEX BARSTOCK.
LENGTH:3",4" AND 6".

Cable Gland is a device designed to permit the entry of cable into electrical equipment and which provides sealing and retention.

Gland sizes:-
-A1/A2 TYPE: 16MM TO 75 MM
ALCO TYPE:
G-204,206,254,256,324,326,405,503,505 & 636
-B.W.,C.W. & E1.W.SERIES:20MM TO 75MM
-P.G. THREADED GLAND:P.G 9 TO P.G 56.
-TRS GLAND:16 MM TO 32MM

A flange is an external or internal rib or rim for strength,for a guide or for an attachment to another object.
A flange can also be a plate or a ring to form a rim at the end of a pipe when fastened with a pipe.
Flanges carry the forces of internal resisting moments & may consist of angles,plate or both.
MATERIAL USED:BRASS,C.S,M.S.,S.S & F SERIES.
STANDARDS:BRITISH STANDARS & DIN STANDARDS.
FLANGE TYPE:CASTING & FORGING.
PRESSURE:150 CLASS & FORGING.
SIZE:1/2" TO 12".
FLAGE TYPE:
PRESSURE:
SIZE:

BALL VALVES:

A ball valve is a valve that opens by turning the handle attached to a ball inside the valve.
MOC:BRASS,CARBON STEEL & STAINLESS TELL.
MADE FROM:INVESTMENT CASTING,BARSTOCK AND FORGED.
SIZE:1/4" TO 1-1/2".
TESTING:3000 PSI TO 6000 PSI.

NEEDLE VALVE:

A needle valve is a type of valve having a small orifice and a threaded,needle-like plunger.
USED:FLOW METERING APPLICATIONS,HOTWATER HEATING APPLICATIONS.
MOC:BRASS,C.S,HASTE-ALLOY,MONEL & S.S.
MADE FROM :BARSTOCK AND FORGED.
SIZE:1/4" TO 1-1/2".

MANIFOLD VALVE:

MOC:
BRASS,C.S,MONEL & S.S
MADE FROM:BARSTICK OR FORGED.
TESTING:HYDROSTATIC TEST PERFORMED AT 1.5TIMES OF REQUIRED WORKING PRESSURE.

Flare Fittings are the type of compression fitting which is having a 45-degree flare seating surface.
The male half of fitting has a straight thread and an angled front face.
Main construction consist of 3pc:Body,Sleeve & Nut.
Flare Fittings are used for gas and high pressure lines.
Material:Brass and Stainless Steel.
Standard:SAE J514.
Size:1/8" to 1"

Eye Bolt & U Bolt

Size:1/4" to 1"
6mm to 20 mm

Pipe Clamps

Size:1" to 3"
20 mm to 75mm

Tube Clamp

Size: 10mm to 40mm

THREADED & SOCKET WELD

Screwed and Socket-weld Pipe fitting is a type of pipe fitting which is also known as threaded/socket-weld pipe.
Used primarily for adapting gauges,instruments and valves,process industries and domestic puposes.
MOC:A105,A108,BRASS,F SERIES,HASTE ALLOY & SS
MADE FROM:BAR STOCK OR FORGED
THREADS:BSPP,BSPT & NPT
STANDARDS USED:AMERICAN OR BRITISH STANDARD.
SIZE:1/8" TO 2"
CLASS:2000 TO 9000

BUTTWELD FITTINGS

Forging and bending are featured methods to produce fitting.
These fittings are good choice to pipe water,central heating system,construction and marine.
These are mainly used to avoid the leakage or absorb the pressure.
MADE FROM:BAR STOCK & FORGING
SIZE:1/2" TO 20" NB
TYPE:PLAIN,BUTT-WELDED.
SCH:10,20,40 & 80
STANDARDS USED: AMERICAN OR BRITISH STANDARD.