GTi Gravity Feed Gun & GTi Suction Feed Gun

We bring for our clients GTi Gravity Feed Gun & GTi Suction Feed Guns. Gti is an easily manageable spray gun that means it comfortably meet the specified limits of over 65% transfer efficiency. It is particularly well comfortable with low overspray gun and low pressure gun. The performance is flawless with matching colour and metallic dispersion. It comply with EPA legislation and produced using the international techniques.

The GTi is a compliant spray gun which means that its transfer efficiency puts it comfortably within the EPA specified limits of over 65% transfer efficiency. For a low pressure, low overspray gun the performance is outstanding with superb finishes, colour matching and metallic dispersion whatever the paint brand or system in use.

GTi Suction Feed Gun have used the technology of HVLP and Trans Tech compliant technology. It is user friendly and easily fit in the hand of operator. It is lighter than most of its contemporary products and has user friendly datum markers on fluid and spreader controls.

We have for our clients GTi Pressure Feed Gun that are developed for commercial vehicle refinishes and used the quality primer and paint system. It is well amenable with EPA legislation and save paints in an impressive way. The hard anodized gun body finish ensure corrosion resist. Modular components for easier faster servicing. The best marked feature of the gun its efficiency that comfortably excess of the EPA specified 65%. In addition, it has wide choices of fluid tips that well fit materials and best loved flow rate. The modular components for faster and easier servicing and it range of sizes come- 0.85,1.0,1.2 and 1.4mm.

Avail from us, our DeVilbiss SRI Spot Repair Gun that is a part of of GTi gun, which is developed to match sprayers needs with small scale control. Though bit engineered to match the need but without compromising on atomisation, pattern shape, speed and comfort. It is fully functional small scale spot repair gun best for comfort. Excellent fragmentation of both solvent and water based materials. HVLP and Trans Tech atomisation technologies are used. Armed with small round small cap for precise spot printing of the injured region. It has inexpensive, semi disposable cups, easy to clean and simple to use. Color used accordance with material identification.

Under the category of Respiratory Protection Testing & Replacement Components, we offer the following:

• “ Valueair” Half Mask Repirator: It is exchangeable, dual cartridge made for good protection from today’s bodyshop. It is silicon free enable to suit to certain spraying applications

• Air Fed Half Mask Breathing Outfit: It is used by most of the profesional sprayer

• Eye Protection Goggles: These are light weight and impact resistance in accordance with EN166. The frame is made in flexible PVC and lens are treated with an anti mist agent

• Air Quality Test Kit: It monitors the condition of breathing air
• Integral Style Air Visco Outfit: It helps operator respiratory protection in the bodyshop

• Replacement Waistbelt Filters: Easy to change self-contained odour removal cartridge

We supply Air Filtration & Control Equipment, Air Hose & Air Hose Fittings that provide air filtered to 0.01 micron suitable for air-fed respiratory outfits. It is suitable for use in booth/oven up to 100 degree C and has Three ball valve controlled outlet. Filter regulator provides air filtered to 20 micron. Air Hose and Air Hose Fittings are suitable for all types of spray guns and air tools. It has good quality rubber that ensure longer service life. High quality Re Usable Plated Connections ensure a long service life, it is re –usable and available in three piece fittings with brass cramp ring, outer sleeve and loose nut connection.

We have for our clients a wide range of gravity feed cup accessories that include mixing cups that are handy, disposable, made from solvent resistant clear polypropylene. Those are calibrated with a 0-600 volumetric measurement scale. Second one are cup liners, allows guns to resist leaks and spills, these are user friendly, easy to clean and dispose without a mess. It is best for most gravity feed guns. Third accessories are cup filters, which closely fit in the neck of the gravity feed cup. It helps to finish the blemish free and it is inexpensive and virtually indestructible. Resistant to most solvent and easily cleaned.

We offer the following Suction Feed Cup Accessories:

• Drip Free Diaphragms: It resist leakage of cups, fit closely under th cup lid and there is no need to remove the cup gasket. Shallow wedge shape flows paint away from the vent hole and keeps a suction gun working smoothly

• Suction Cup Lid Gaskets: It comes in two attractive features –Tri-seal or traditional leather and has three handy replacable handy packs of gaskets. It fits all De Vilbiss KR type suction cups

• Cup Filters: It removes dirt, flakes and scum. It helps to clear the spray gun passage clear, inexpensive and virtually indestructible and resistant to most solvents and easily cleaned

• Mini Cups: It reduces paint wastage and cleaning time / effort. It has 0.25 litre capacity durable nylon cup with clip on lid. Cut down on costly paint mixes and prevent suction cup leaks and vent hole blockage

We procure and supply a wide range of spray gun accessories that are superior in quality and are of international quality standards. The various types of spray gun accessories available with us are:

• Spray Gun First Aid: It has Includes necessary replacement seals and gaskets, lubrication oil is provided and also paint cup filter is included. It supplied in a good box for storage along with cleaning brushes.

• Gun Fitting Pressure Tester: There is no need to disconnect the air line and provided with a gauge that calculate the accurate pressure. It is easy to fit and removal and easily snapped on and of the gun for convenience.

• In-Line Air Adjusting Valve: It fits neatly in line at the gun inlet, lightweight without effecting the balance.

We bring for our clients viscosity cups and guns. The viscosity cups supplied by us are tough, durable, easy to clean nylon. It has hanging hook for convenient storage. It is fast and simple way to check out paint viscosity. Whereas the duster/ blow guns sourced and supplied by us has a palm sized trigger operated with diffused air flow. Compact, visible and lightweight, these products are available with a nozzle extension. Low noise factor is another good point and it is available in bright colours.

Pressure Feed Container & Binks Products

Avail from us, Pressure Feed Container & L20 Air Motor & Binks Products procured from reliable manufacturers. These products are paint products that are available in three standard sizes, with top feed arrangement 9 litres, 22 litres and 45 litres. We also supply these products in higher capacities of 25-litres and 450 litres. The L20 air motor that we supply are primarily designed to drive the paddles on pressure feed containers & mixing vessels. These products can also be used with the pressure feed containers.

We supply paint shop Maintenance products to our clients. These products are known for their quality and largely used for paint shop maintenance purposes. The different types of these products and their applications are given below:

• Phirol Booth Addictive - These make the phosphorus value intact thus avoid clogging of paint

• Tak Rag – These are used for cleaning the product.

• Non drying paste for application on booth wall.

• Tak peelable, which clean the booth wall by removing the film formed.

• Oven coat & tak varnish for dust free ovens.

• Lint free wipe & standard wipe.

• Striping coating is for electrical panels that prevents from scratches and dust.

We source and supply a wide assortment of L&T switchgear and electrical panel products. These products conform to the international quality standards. These products include:

• L &T Switchgear- Control Gear, Power Gear

• L&T Wires

• HAGER MCBs

• Distribution Boards (DB)

• RCCB or ELCB

• SALZER Panel Accessories

• Rishabh Voltmeters

• Ammeters (Amperemeters)

• GIC Timers

• MEHER Power Capacitors

• MOELLER Bus-Bar Trunking System