Zener barrier is useful for powering Intrinsically safe field devices in Hazardous area.
These barriers are specially designed to power field devices such as Intrinsically safe smoke detectors, Intrinsically safe heat detectors, Intrinsically safe strain guages for weighing machines, Intrinsically safe response indicators and Intrinsically safe alarm devices.
Necessary certification permits installation in Zone 1 or 2 gas group IIA, IIB and IIC.
This product is a second generation field mounting product which produce a very loud audible siren or hooter warning signal typical 110 - 140 db in a hazardous area.
This product can be coupled with Flameproof LED or Flameproof Xenon flasher
It may be switched directly by 230 V AC, 110 VAC, 24 VDC or also be switched in the hazardous area by an intrinsically safe relay (potential free input), or any equipment with an intrinsically safe dry contact.
Necessary flameproof certification permits installation in Zone 1 or 2 gas group IIA & IIB.
flameproof ceiling fans incorporate power saving, performance, safety and durability, comfort & most importantly negligible maintenance.
necessary certification permits installation in zone 1 or 2 gas group iia & iib.
the best use is for medium ceiling locations in hazardous area where there are no air circulation alternatives for plant personnel.
effectiveness of existing hvac in hazardous area is poor; therefore use of flameproof ceiling fans in air conditioned environments helps improve uniform air circulation resulting in energy conservation.
Compact and simple to use, this torch is designed for use in potentially explosive atmospheres specifically in IIA , IIB & IIC areas, emergency situations or wherever the need arises for a handheld safety torch.
It provides a focused bright fringe of white light produced from a cluster of white LEDs.
Powered by highly durable rechargeable battery with more than 1500 charging cycles, makes it a perfect product for continual usage.
Due to LEDs, the torch consumes extremely low power and hence a longer light duration up to 1 hour. Since the light source is LED which is known for it’s long life compared to any other light source, replacements are extremely rare.
The constructed torch comes in a typical cast Aluminium Lm6 and a trouble free single click button
The constructed torch is designed to fit even a gloved hand and a shoulder belt provided along enables one to have free hands.
Necessary flameproof certification permits installation in Zone 1 or 2 gas groupIIA, IIB and IIC , Ip 65 protection.
This is the best product to tackle darkness and emergency situations due to power break down in hazardous areas. It can also be used as backup or contingency light for on-going project sites having power unavailability.
The white bright produced is sufficiently adequate level to light up 120 Sq feet of area such that a good readability can be achieved.
The best suited applications are in the rooms, door-ways, lobbies & plant areas located in hazardous areas.
It comes in 3 models - 15 minute back up time, 30 minute back up time & 1 hour back up time to suit your application.
Operating voltage of the power supply will be 230 V AC, 24 V DC or 110 V AC
Permits installation in Zone 1 or 2 gas group IIA & IIB. IP 65
Necessary Flameproof certification
IP 65 protection. Suitable for wall & hook mounting.