Flender Limited

universal gear coupling for oil or grease lubrication and shaft misalignments up to 1º.

universal gear coupling according to international standards; for grease lubrication; shaft misalignments up to 0. 5º.

arpex® all-steel coupling, ars-6 composite series combination of maintenance-free all-steel coupling and new composite technology. A corrosion resistant, extremely light coupling with a permissible angular misalignment of up to 0. 7°, for drives with large distances between the shafts.

arpex® all-steel coupling, arf-6 short series maintenance-free all-steel coupling for the use at low up to medium torques and high speeds, but extremely short distances between the shafts and a permissible angular misalignment of up to 0. 7°.

arpex® all-steel coupling, arm-4 series maintenance-free miniature all-steel coupling for the use in drives with very low torques and permissible angular misalignment of up to 1°.

arpex® all-steel coupling, art-6/8/10 high-speed series arpex® high-speed coupling for the use in very sophisticated drive systems in power engineering, in the petrochemical industry and in marine propulsions. Very well suitable in all
high-speed applications requiring a reliable transmission of torque even in the case of shaft misalignment.

• couplings made out of high-quality cast iron in our own foundry
• optimized flexible elements out of buna n, resistant to many media
• owing to the specific adaptation of the metal pins to the flexible elements no wear occurs during operation at permissible displacement

• couplings made out of high-quality cast iron in our own foundry
• optimized flexible elements out of polyurethane, resistant to many media
• because of optimized flexible elements no wear occurs at permissible misalignment during operation

• couplings made out of high-quality cast iron in our own foundry, or out of high-quality steel
• the optimized shape of the buffers and conical seats of the buffer pins facilitate mounting and guarantee maintenance-free operation
• type variants are offered, e. G. "design with limitation of axial play" or "coupling engageable with stationary drive"

• couplings made out of high-quality cast iron in our own foundry
• identical hub parts
• flexible ring out of polyurethane, resistant to many media
• flexible ring with low torsional backlash adapted to the metal claws
• owing to optimized flexible elements no wear occurs during operation at permissible displacement

advantages

• can be used for large shaft misalignments
• suitable for high dynamic loads
• good damping properties
• rings available with different degrees of elasticity for the dynamic adaptation of the drives
• designs
• also available as fail-safe coupling
• grey cast iron or steel
• meets the specifications for acceptance of the most important classification societies

motox-n helical geared motors are available in 9 sizes with nominal torques up to 20,000 nm and installed power ratings up to 160 kw and thus offer an optimum size gradation.

the increase in torque by up to 60% compared with the previous series and an increase of up to the quintuple value of the transmission ratio in many cases allow using a more compact drive which means reduced space required for installation and thus, lower cost for you.

motox-n parallel shaft helical geared motors are available in 14 sizes with nominal torques up to 75,000 nm and installed power ratings up to 200 kw and thus offer an optimum size gradation.

the increase in torque by up to approx. 60% compared with the previous series and an increase of up to the triple value of the transmission ratio in many cases allow using a more compact drive which means reduced space required for installation and thus, lower cost for you.

the mds are a range of frenquency inverters for controlling sthe speed of three phase ac motors. With their default factory settings they cover a large range of simple motor control applications. Via its comprehensive functionality they can also be used for advanced torque control applications.

as systems supplier of geared motors, frequency inverters, and control systems, we have gained a wealth of experiences enabling us to find the optimum drive system for any application.

the motox-master motor-integrated frequency inverter presents an innovative systems solution with which the philosophy of decentralizing intelligent drive units is realized.
with the integration of the frequency inverter into the motor instead of the switch cabinet costs can be considerably reduced compared with conventional control drives.

owing to the modular concept, in combination with all motox® gear unit variants it is possible to configure optimum drive systems.

to satisfy the high quality demands on autogard torque limiters, the development and manufacture of autogard torque limiters have been integrated into a qualified quality management system in compliance with din iso 9001 requirements.

torque limiter used in applications where a reliable protection is required; to avoid damage in case of overloads and long and expensive downtimes in case of repairs.

Industry-leading efficiencies – that's what siemens' new die-cast copper rotor technology delivers to the industrial motor marketplace. With their advanced design, these motors exceed nema premium requirements. A global technology leader, siemens is committed to bringing the motors industry cutting-edge innovations and the finest products possible for decades to come. Our new lines of nema motors build on our reputation for rugged and durable motor performance. From simple open drip proof motors and cast iron tefc motors, to sophisticated nema motors that meet or exceed ieee 841 and nema premium standards

the product range covers three-phase motors ranging from 0. 1 up to 800 kw for low and high voltage as well as electric drives up to 6000 kw.

apart from the manufacture of standard motors, the company specializes in the production of motors in special design according to customers' requirements.

the products are used world-wide in the following branches:

planox®- multiple disk, dry friction clutch, available in 22 sizes and 14 types.

permanently filled hydrodynamic fluid coupling according to the föttinger principle; 15 types and 16 sizes in three series.

motox bevel geared motors are available in 14 sizes with nominal torques up to 78. 000 nm and installed power ratings up to 200 kw and thus offer an optimum size gradation.

the increase in torque by up to approx. 80% compared with the previous series and an increase of up to the quintuple value of the transmission ratio in many cases allow using a more compact drive which means reduced space required for installation and thus, lower cost for you.

motox-n helical worm geared motors are available in four sizes with nominal torques up to 1,500 nm and installed power ratings up to 15 kw and thus offer an optimum size gradation.

the helical worm geared motors have two gear stages. In the output gear stage the tried and tested cavex® worm gearing is used and the first gear stage comprises helical gears of the modular construction system. The very high efficiencies and torques resulting from it in many cases allow using a more compact drive which means reduced space required for installation an thus, lower cost for you.