Flow Hydro Systems

We manufacture and supply a wide
range of high quality hydraulic cylinders for various industrial applications. Hydraulic
cylinder converts fluid power into linear mechanical force and motion. Further,
it is also used to convert fluid energy into an output force.
 
Technical specification:

• Suitable for 40, 50 & 80 ton capacity


• Ram Diameter 250 mm to 350 mm


• Mounting and stroke limit switch for
  safety purpose

Features:

• High performance level


• Efficient


• Suitable seals for various media


• Rod & mounting selection guide.

We offer a wide range of deep drawing
press, which are best in performance. These Presses are manufactured
with latest technology and mechanism; these are having higher
productive capacity and consume very less electricity in comparison
to other. These Drawing Presses are used for various application,
some of them are:
 
Application Areas:

• Kitchen Sinks
  


• Geyser
  


• Kitchen Utensils
  


• Automotive Parts
  

We
are producing a wide gamut of Flat Jacks which are used over range of
high to low pressure testing and for other oilfield uses. We have
achieved expertise to manufacturer these Hand Pumps with excellence
and attention to each and every particular and specifics.
 
Features:

• FHS make
  jack / cylinders are light weight heavy duty rigid.
  


• Hardened to
  reduce weight of jack / cylinder
  


• Piston
  chrome platted to avoid rust corrosion.
  


• Plunger
  wiper reduces contamination, extended cylinder life.
  


• Removable
  life hardened saddles protect plunger during lifting & pressing
  

We are also producing a range of
Hydraulic Hecambering Press, which have been proven to be the best in
the industry. We have achieved great expertise fabricating these
presses. We are providing these Presses as per the clients’
specification also.

Type No.	16 HT 50 S
Capacity	16 TON
Cylinder Return	Spring return
Cylinder Stroke	50 mm
Piston Rod (Ram)	100 mm
Working Height From G.L.	800 mm
Daylight	200 mm
Throat	150 mm
Electric Motor	5 HP / 7.5 HP
Oil Tank Capacity	100 ltrs.
By operation	foot switch

Type	25 HT 200S
Capacity	25 Tons
Cylinder return	Spring Return
Cylinder Stroke	35 mm
Piston Rod Ram Dia	120 mm
Working height from ground level	850 mm
Throat	140mm
Electric Motor	7.5 HP
Day light	105 with tool fitting.
Oil Tank Capacity	90 Ltr
Operation	By foot Switch

Using high grade of raw material
such as SS, MS, alloy steel, etc, we are manufacturing a range of
Hydraulic Stacker, which used for automobile component industry for
die loading and unloading for a press.

Technical specification:

Capacity	1 TON
Lift Height	1600 mm
Closed Height	2200 mm
Maximum Extended Height	1600 mm
Basic load capacity	1 TON
Weight	300 Kg.
Steering wheels	180 x 50 mm THK
Load wheels	95 x 70 mm THK
Lift stroke	15 to 20 mm

Features:

• Light weight
  


• Compact sizes
  


• Easily movable
  

We
are providing and exclusive range of Lifting Platforms which are
designed to meet the increasing demand of the market. The range finds
application in lifting and transporting of heavy dies or heavy
materials. These tables also find applications in automatic feeding
of tin sheets in cutting, printing and maintenance work. Some
of the main features of these Lifting Platforms:

• Single
  or Multi Scissor Lift Table
  


• Mechanical
  Lift Table
  


• Lifting
  Height of Table is Adjustable
  


• Lifting
  Hooks are provided
  


• Manually
  operated Hand Pump in Built with Safety Relief Valve
  


• Ram
  is Hard Chrome Plated.
  


• Swivel
  Handle for Pushing and Pulling
  

Besides
these features, we can also customize the products based on following
features:

• Aluminum
  chequered plate
  


• Caster
  wheels
  


• Motoriesed
  Power Pack
  


• Railing
  around the platform can be provided
  


• Pressure
  gauge
  

Hydraulic
Power Pack is a device which generates power to actuate the Hydraulic
application. We manufacture and supply an advance range of Motorized
Hydraulic Power Pack, The use of advanced technology in its
manufacturing makes them being widely used in various industrial
applications.

Our
Motorized Hydraulic Power Pack consists of following components:

• Hydraulic
  Oil Tank
  


• Electric
  motor & Starter
  


• Radial
  Pump / Gear Pump / Vane Pump
  


• Direction
  Control valve
  


• Relief
  valve
  


• Return
  line filter
  


• Suction
  strainer
  


• Filler
  Breather
  


• Pressure
  Gauge with isolating valve
  


• Oil
  level indicator
  


• Manifold
  to mount the above valves
  

Technical Specification:

The Discharge Capacity with corresponding operating pressure with required motor HP is shown in chart
Max. Operating Pressure	Discharge	Motor
K.G. / CM2	LPM	H.P.
650	1.5, 2.6, 3.7	2.5, 4.2, 5.9
450	2.5, 4.2, 5.8	3.2, 5.4, 7.5
350	3.7, 6.2, 8.6	3.6, 6.0, 8.5
300	4.3, 7.2, 10.0	3.6, 6.1, 8.5
250	5.0, 8.4, 11.7	3.5, 5.9, 8.2
200	5.8, 9.7, 13.6	3.2, 5.4, 7.5

We
are producing a range of Power Pack which are comprises of standard
pumps, valves and accessories. Our Hydraulic power pack offers
capacities, control options & configurations for several
applications. These, also ensures efficient functioning under the
opposite climatic conditions and even in coastal areas, where the
salt content is high in the atmosphere.

Some
of the characteristics of these Power Packs are:

• Reducing
  requirement of connected load
  


• Reducing
  electricity consumption
  


• Enhance
  safety measures
  


• Introduction
  of logical controls
  


• Uniform
  transmission of power to a equipment
  


• Increasing
  durability of working components
  

Technical
specification of Power Pack:

• 5 HP electric motor dowty gear /
  high pressure radial piston pump
  


• Solenoid operated direction valve
  


• Pilot operated check valve
  


• Pressure gauge with isolator
  


• Pressure relief valve in line
  check valve
  


• Complete assembly with mounting
  manifold block
  


• 80 liters. Oil tank capacity oil
  filler / breather oil drain plug and
  


• Suction strainer facility
  

We
are presenting an array of Hydraulic Jack which are also used in
Automobile industries. These can be easily used for heavy duty
applications and have been proven to be the best in the market. With
the help of our sound infrastructure, we are quite capable of
designing these Jacks as per the requirement of the clients.
 
Features:

• Corrosion
  resistant due to the Piston chrome platted
  


• Protection
  during lifting & pressing
  


• Easy
  to install
  


• Extended
  life because of low contamination
  


• Lightweight
  


• Compact
  sizes
  

We
are providing a comprehensive range of Hydraulic Jack with Plain RAM
which are especially used for automotive industry. Our hydraulic jack
is designed for heavy duty shop applications and also enables the
user to get into low work areas.
 
Features:

• FHS make
  jack / cylinders are light weight heavy duty rigid
  


• Hardened to
  reduce weight of jack / cylinder
  


• Piston
  chrome platted to avoid rust corrosion
  


• Plunger
  wiper reduces contamination, extended cylinder life
  


• Removable
  life hardened saddles protect plunger during lifting & pressing
  

We
provide comprehensive range of hydraulic jack for the automotive
industry. Our hydraulic jack is designed for heavy duty shop
applications and also enables the user to get into low work areas.
Our range of hydraulic
cylinders & jacks are known for their quality, reliability &
performance.
 
Features:

• Self-adjusting
  


• Suitable
  for long trouble free life
  


• Safe
  for the vehicle operation
  


• Rugged
  construction
  

We are manufacturing a range of
rubber Molding Press which are being widely used in several applications in
rubber industries. Our molding presses are used for sheet molding for plastic
sheets, ply boards, rubber sheets, particle boards and many more. We ensure
these are manufactured strictly from high quality material and provide full
satisfaction to the clients.
 
These are known for following
features:

• High functional efficiency


• Longer operational life


• Simple-to-use and


• Easy-to-maintain


• Available in
  various sizes