Clamps and Valves

We are engaged in manufacturing and exporting Clamps & Valves such as Pipe Clamps, Heavy Pipe Clamps and Needle and Plug Valves. These have gained huge appreciation in the market for their host of qualitative features.

We offer a wide range of heavy series pipe clamps that are manufactured using qualitative material sourced from trusted vendors. These have gained huge appreciation in the market for their host of qualitative features.

Our range of pipe clamps is categorized as the following:

•    Standard Series
o    Assembly with weld plate & screws
o    Assembly with weld plate, top plate, & hex. Bolts
o    Channel mounting rail

•    Heavy Series
o    Assembly With Weld Plate, Top Plate & Hex Bolts
o    Channel Mounting Rail

Fluid Controls offers a range of pipe clamps manufactured by it's sister concern Hyd-Air Engineering Works, Goa. Clamping of pipes in installations is required to dampen vibrations, provide support to the installation and prevent loosening of the joints/welds.

Hyd-Air Pipe Clamps, with their unique 4-rib construction design, prevent the transmission of vibrations from the pipe to the frame and vice-versa. They also provide rigid support to the pipe, both in lateral and longitudinal directions, relieving stresses caused by unequal movements in the pipeline. The material of the pipe clamps differs to suit working conditions - from relatively cold conditions to temperatures upto 550⁰C. Hyd-Air Pipe Clamps conform to DIN 3015: 2000

Heavy Duty Pipe Clamps:

Heavy Duty Pipe Clamps are used in installations where heavy pipes and high vibrations are encountered. They are invariably used for trench layout of pipes and in open-weather conditions.

Heavy Duty Pipe Clamps are available with weld plate mounting for all sizes and for channel mounting with special "T" nuts for pipe sizes upto 1" or 38mm OD. Channels are available in lengths of 1/2" meter and are economical for multiple mounting on a single channel. Both the weld plate and the channel mounting designs are available only with a top plate in view of the heavy vibration and loading encountered.

Heavy Duty Pipe Clamps with polypropylene bodies are available for pipe sizes upto 8" or 222 mm OD. They are available in a vertical mounting arrangement or a horizontal multi-clamp arrangement wither back to back or run.

Standard Duty Pipe Clamps:

Standard Duty Pipe Clamps are used in installations having average loading with relatively light vibration in the system. These clamps are ideal for machine tool applications and in instrumentation piping. The clamps may be used without the top plate for reasons of economy where there is low/no vibration.

Standard Duty Pipe Clamps are also available for channel mounting with special "T" nuts. Channels are available in lengths of V% meter and are useful for multiple clamping on a single base. They also allow flexibility of clamping where the pitch between the pipes is uneven. Standard Duty Pipe Clamps are available for pipe sizes upto 2" or 50mm OD.

The needle and plug valves we offer are fabricated using optimum quality material procured from certified vendors. These valves find extensive application and are available in diverse specifications.

Types of Needle Valves we offer are as follows:

•    Integral Bonnet Screwed ends
•    Integral Bonnet Double Ferrule ends
•    Screwed Bonnet Design Female ends
•    Screwed Bonnet Design Male x Female ends
•    Screwed Bonnet Design Double Ferrule Tube Ends
•    Angle Needle Valves Screwed Bonnet Design
•    Colour Flow Needle Valve
•    Colour Flow Control Valve

Plug Valves

•    Screwed Bonnet Design Male/Female ends
•    Screwed Bonnet Design Double Ferrule ends