Home Introduction Our Products Contact Us Enquiry
Fluxpower Private Limited
 Stabilizers & Transformers
We offer technically advanced range of stabilizers, transformers & electrical panels. Our manufactured power conditioning products provides the right solutions for different types of work environment. Used across manufacturing units, hospitals, entertainment ones, offices etc., our range includes:


Single Phase Air Cooled Voltage Stabilizers
Single Phase Air Cooled Voltage Stabilizers

We manufacture high efficiency Single Phase Air Cooled Voltage Stabilizers which are suitable for effective functioning in different working conditions. The stabilizer works effectively bears voltage fluctuations and delivers one output. It is a fast acting stabilizer and any variation in frequency, supply, load etc., does not effect the output.

Specifications:

Input
180 V to 270 V AC or as per client's requirement
Output
230 V ± 1% (Variable 5%) or as per client's requirement
Capacity
Upto 30 KVA
Regulation
Better than ± 1%
Winding
Copper wound
Duty cycle
Continuous
Frequency
47 - 53 Hz
Waveform distortion
Nil
Power factor
Nil
Ambient
0 to 45° C Max
Environment
Designed for indoor tropical use
Mounting
Free on wheel

Standard Accessories :

Controls
Auto/ Manual selector switch.
Increase /Decrease selector switch.
Input / Output Volt selector switch.
Pot for variation in output in auto mode.
Protection
Under voltage/Over voltage cutoff at output.
Over load protection at Input.
Meter
Voltmeter with input and output selector switch.
Indicating lamps
Power ON, High/Low Voltage indication.

Optional Accessories:

  • Transformer oil
  • RFI Filter / Surge suppressor
  • Servo bypass switch
  • Digital / Analog frequency voltmeter and Ammeter
  • Start / Stop push buttons

Note: Custom built range will be designed as per client's specifications.




Three Phase Air Cooled Voltage Stabilizers

We offer high-grade Three Phase Air Cooled Voltage Stabilizers that are designed & developed by our technical expert, to deliver optimum performance. Our 3 phase air-cooled stabilizers are wide preferred by industrial & commercial establishments to control the voltage fluctuation with immaculate electronic circuitry. These have automatic line voltage corrector that uses synchronous motor in close loop control.

Specifications:

Input
340 V to 480 V AC or as per client's need


Output
415 ± 1% (Variable 5%) or as per client's need


Capacity
Upto 100 KVA


Regulation
Better than ± 1%


Winding
Copper wound


Duty cycle
Continuous


Frequency
47 - 53 Hz


Waveform distortion
Nil


Power factor
Nil


Ambient
0 to 45° C Max


Environment
Designed for indoor tropical use


Mounting
Free on wheel

Standard Accessories :

Controls
Auto/ Manual selector switch.
Increase /Decrease selector switch.
Input / Output Volt selector switch.
Pot for variation in output in auto mode.
Protection
Under voltage/Over voltage cutoff at output.
Over load protection at Input.
Meter
Voltmeter with input and output selector switch.
Indicating lamps
Power ON, High/Low Voltage indication.

Optional Accessories :

  • Servo bypass switch
  • Digital / Analog frequency voltmeter and Ammeter
  • Start / Stop push buttons
  • RFI Filter / Surge suppressor

** Note: Custom built range will be designed as per client's specifications.




Three Phase Air Cooled Voltage Stabilizers


Three Phase Oil Cooled Voltage Stabilizers
Three Phase Oil Cooled Voltage Stabilizers

We offer precision manufactured Three Phase Oil Cooled Voltage Stabilizers that are known for reliability and quality across industries. Our 3 phase oil-cooled stabilizers have special electronic circuits to operate gensets. The precise circuit of these transformers assist in performing effective motor drive control mechanism.

Apart from optimum functionality it is the rugged construction & energy efficient aspects that makes our 3 Phase Oil Cooled Voltage Stabilizers trustworthy. The transformers also have that capability to control the voltage fluctuation efficiently.

Specifications :


Input
340 V to 480 V AC / As per client's need


Output
415 ± 1% (Variable 5%) / As per client's need


Capacity
Upto 500 KVA


Regulation
Better than ± 1%


Winding
Copper wound


Type of cooling
Oil cooled (Without oil)


Duty cycle
Continuous


Frequency
47 - 53 Hz


Waveform distortion
Nil


Power factor
Nil


Ambient
0 to 45° C Max


Environment
Designed for indoor tropical use


Mounting
Free on wheel

Standard Accessories :

Controls
Auto/ Manual selector switch
Increase / Decrease selector switch
Input / Output Volt selector switch
Pot for variation in output in auto mode
Protection
under voltage/Over voltage cutoff at output
Over load protection at Input
Meter
Voltmeter with input and output selector switch
Indicating lamps
Power ON, High/Low Voltage indication

Optional Accessories :

  • Servo bypass switch
  • Digital / Analog frequency voltmeter and Ammeter
  • Start / Stop push buttons
  • RFI Filter / Surge suppressor
  • Transformer oil

** Note: Custom built range will be designed as per client's specifications.






Automatic Voltage Controller

Our automatic voltage controller are precisely designed & engineered to deliver higher output to our clients. Used for different electrical applications, our automatic voltage stabilizers ensure longer performance and they are built to provide effective solution to problems like voltage fluctuations. The ruggedness in construct & heavy duty function meets the Indian working environment.

Specifications :

Input Voltage
380-440 Volts, 3-Phase 50Hz. AC supply


Output Voltage
Fixed Rated maximum DC voltage or variable from zero to maximum rated voltage.


Output Current
Rated maximum DC current


Temperature Rise
Less then 35 C above ambient at the top of the oil.


Efficiency
12V Rect-82%
24V Rect-90%
100V Rect-94%
200V Rect- 96%
More than 250V
Rect-More than 97%


Ripple Content
Less than 5%


Insulation
'A' class for oil cooled.

** Note: Custom built range will be designed as per client's specifications.




Automatic Voltage Controller


Distribution Transformer
Distribution Transformer

We manufacture vacuum pressure resin impregnated dry type distribution transformers. The transformer is in general used near the load center so as to achieve better regulation & less distribution loss. These are Class 'F' & 'H' & 'C' insulated dry type transformers and are best suitable for application across:

  • Oil refineries
  • Chemical plants
  • Marine applications
  • Metro Railways
  • High rise buildings
  • Steel works
  • Malls

** Note: Custom built range will be designed as per client's specifications.






Isolation Transformer

We manufacture step up and step down isolation transformer as per client's requirements. Use of Toroidal Core & E.I. stamping lamination in C.R.G.O. Materials depends on client's application need. These isolation transformers are above 75.0 KVA capacity and are oil cooled type. We also offer non-standard ranges on specific order. These have powder coated MS and are above 10.0 KVA capacity.

Details :

Input Voltage: 240v, 50Hz, 415v, 50Hz

Output Voltage: From zero to 12.5% above the line voltage (i.e. 270V or 470V).
No load current: Less than 2% of full load.

Construction: Single and three phase units are enclosed in sheet metal covers and can have open type construction for panel mounting if required by client. The oil cooled units can have sheet-metal tanks with or without cooling radiators.

Current Ratings: Single wound type

STANDARD MODEL SPECIFICATIONS :

Single Phase

CAPACITY: up to 50.0 KVA capacity
INPUT : 220 V/ 230 V /240 Volts AC, 50 Hz
OUTPUT : 0-9-12 v/ 0-15-18-25V/ 0-100 Volts AC

Three Phase

CAPACITY: up to 300.0 KVA capacity
INPUT : 400V/420V/440V/460Volts AC, 50 Hz
OUTPUT : 0-9-12 v/ 0-15-18-25V/ 0-100 Volts AC

** Note: Custom built range will be designed as per client's specifications.


Isolation Transformer


Power Transformer
Power Transformer

We offer two prominent types of power transformers. Namely, Single phase transformer with capacity upto 50 KVA and Three Phase Transformer with capacity upto 150 KVA. These are designed to meet most unique and specific requirements of application. Our range of low voltage transformers comprises double wound. We also manufacture custom designed transformers as per client's usage need.

  • Available in open enclosed and oil cooled models
  • The enclosed models are supplied in sheet steel enclosures.
  • Lovering is provided for the heat dissipation of the generated heat.
  • Oil cooled transformers are housed in MS Tank
  • Oil cooled transformers have adequate pressed steel radiators
  • Deliver proper heat dissipation
  • Oil cooled units are available with standard accessories like oil level indicator, drain plug / drain valve, earth terminals, unidirectional CI wheels, Oil fill hole and terminal covers.

** Note: Custom built range will be designed as per client's specifications.




Variable Voltage Auto Transformer

We manufacture indigenously developed variable voltage Auto Transformers and are a leading Indian manufacturer of Auto transformers. Our auto transformer are suitable for indoor & outdoor applications with different current range varying from 2A to 2000A(both in Air & Oil Cooled).
We have supplied these transformers to various industries are doing well with repeat orders from our customers.

Details :


  • Voltage Ratings - 240V AC or 120V AC
  • Current Ratings: Air Cooled from 2 Amps to 600 Amps in 1PH, 2PH, 3PH Oil Cooled from 2 Amps to 2000 Amps in 1 PH, 2PH, 3PH No.
  • Efficiency & Regulation: Designed to produce less heat & low watt losses, thus achieves high efficiency and close Voltage regulation.

Highlights :

  • No wave form distortion
  • Smooth and step-less voltage control
  • Silver plated commutator surface
  • Simple installation and connections
  • Long Life
  • Negligible maintenance
  • Voltage Doubling , Current Doubling possibility with series and parallel of coils
  • Low Temperature rise- class "F" Insulation
  • Rugged mechanical construct
  • Spare carbon brushes provided
  • Motorized transformers also available with gears

** Note: Custom built range will be designed as per client's specifications.


Variable Voltage Auto Transformer


LT Electrical Panel
LT Electrical Panel

Making the best of installed facilities, we manufacture LT Electrical Panel as per customer specifications. These panels are complete constructs with required wiring and harnessing that minimizes on site installation time. Our Lt electrical panel includes Starter Panels, Power Control Panels and Power Factor Improvement Panels.

Our LT Electrical Panels comprise of the following:

  • DG Set AMF/Synchronizing Panels
  • Instrument/Mimic Panels
  • Pneumatic Panels (Solenoid)
  • LT Bus ducts
  • Main LT Panel (PCC)
  • Automatic Power Factor Control Panel
  • Power Distribution Panels
  • Motor Control Center Panels (MCC)
  • AC/DC Drive Panels
  • Soft Starter Panels
  • PLC Panels

** Note: Custom built range will be designed as per client's specifications.


Single Phase Air Cooled Voltage Stabilizers
Three Phase Air Cooled Voltage Stabilizers
Three Phase Oil Cooled Voltage Stabilizers
Automatic Voltage Controller
Distribution Transformer
Isolation Transformer
Power Transformer
Variable Voltage Auto Transformer
LT Electrical Panel

Member IndiaMART.comCopyright © Fluxpower Private Limited, All Rights Reserved (Terms of Use)
Developed by IndiaMART InterMESH Limited