 |
EnduroShield® is a revolutionary permanent non-stick, invisible coating for glass, tiles and grout, ceramic, porcelain and stainless steel surfaces. EnduroShield acts as a shield to seal the porosity of the surface allowing contaminants to reside on an easy to clean protective coating. The once only application makes grime and soap scum easier to clean by up to 90%. It also protects the surface against staining, etching from mineral deposits and salt corrosion. EnduroShield is factory applied to new surfaces such as glass shower doors and glass railings or can be applied to your existing installed surfaces by your nearest after market applicator. |
 
| Protective Coatings for GlassEnduroShield for Glass is a permanent non-stick, invisible protective coating.Using state of the art nanotechnology, EnduroShield acts as a permanent shield to seal the porosity of the glass, allowing contaminants to reside on an easy to clean protective coating, guarding against staining and etching. Major Benefits:
1) The glass is much easier to clean 2) The glass stays cleaner for longer 3) The glass is protected against staining and etching Suitability: All glass surfaces such as shower screens, windows, pool fencing, glass railings, doors, roofs, facades, awnings, mirrors and splashbacks. Coverage: Depending upon the conditions (temperature, wind, indoors or outdoor application) coverage rate will vary. Good conditions will yield up to 64 square metres per litre, however 50 square metres is the average. Application Methods:
1) Spray and polish by hand (single coat) 2) Semi-commercial LVLP spray gun; (Low Volume Low Pressure) either gravity or suction fed with chemical resistant seals. (two light coats) Product sizes: 1 Litre (2 x 500ml), 5 Litre, 125ml DIY kit and 500ml DIY kit. |
 
Coating for Floor and Wall TilesEnduroShield for Tiles & Grout is a permanent non-stick, invisible protective coating which minimises maintenance on treated surfaces by reducing cleaning time and effort. Using state of the art nanotechnology, EnduroShield chemically bonds to the tiles and grout surface leaving an ultra thin transparent barrier that provides both hydrophobic and oleophobic protection. The superior protection reduces the build-up of mould and harmful bacteria, helping promote a germ free environment and protecting against staining and etching. Major Benefits: 1) The tiles and grout are much easier to clean 2) The tiles and grout stay cleaner for longer 3) The tiles and grout are protected against staining and etching 4) Reduces the amount of mould and algae that grows Suitability: All Ceramic, Porcelain & Vitreous tiles and grout including wall, floor indoor and outdoor tiles, vitreous china such as baths, toilets and basins. Suitable for use on marble and granite surfaces provided it is treated with a second coat. Coverage: Depending upon the conditions (temperature, wind, indoors or outdoor application, amount of grout) coverage rate will vary. Good conditions will yield up to 48 square metres per litre, however 40 square metres is the average. Application Methods: 1) Spray and polish by hand (single coat) 2) Semi-commercial LVLP spray gun; (Low Volume Low Pressure) either gravity or suction fed with chemical resistant seals. (two light coats) 3) Automated spray application into existing production line. Product sizes: 1 Litre (2 x 500ml), 5 Litre, 200L, 125ml DIY kit and 500ml DIY kit | |
| Stainless Steel CoatingEnduroShield for Stainless Steel is a non-stick protective coating that seals the surface, making cleaning and maintenance easier. EnduroShield is completely invisible and does not change or alter the appearance of the surface. EnduroShield provides both hydrophobic and oleophobic protection, reducing both corrosion and tea staining that often forms in coastal environments. Many acidic cleaners that are used to treat the corrosion that develops on stainless steel can accelerate and increase the return rate. EnduroShield will eliminate the need to use those cleaners, and will dramatically slow the corrosion process. Major Benefits: 1) The stainless steel is much easier to clean 2) The stainless steel stays cleaner for longer 3) The stainless steel is protected against staining and etching 4) Slows down the tea staining process
Suitability: Works on all stainless steel such as balustrades, railings, fixtures, facades, kitchen surfaces, appliances, feature and support poles, art displays and sculptures
Coverage: Depending upon the conditions (temperature, wind, indoors or outdoor application) coverage rate will vary. Good conditions will yield up to 55 square metres per litre or 250 lineal metres of railing (at a 200mm diameter), however 45 square metres is the average (single coat)
Application Methods: Spray and polish by hand (single coat indoors, two coats outdoors)
Product sizes: 1 Litre (2 x 500ml), 5 Litre |
Sandblasted Glass CoatingEnduroShield for Sandblasted Glass is a non-stick protective coating that sealsthe surface, making cleaning and maintenance easier. Using state of the art nanotechnology, EnduroShield acts as a permanent shield to seal the porosity of the glass, allowing contaminants to reside on an easy to clean protective coating. The invisible coating, which is only two molecules thick, creates a barrier protecting the surface against staining, etching and fingerprints, making it an ideal solution for all sandblasted glass installations. Major Benefits: 1) The glass is much easier to clean 2) The glass stays cleaner for longer 3) The glass is protected against staining and etching
Suitability: All sandblasted and acid etched glass surfaces.
Coverage: Correct spray gun set-up will yield an average of 50 square metres per Litre. Application Methods: Semi-commercial LVLP spray gun; (Low Volume Low Pressure) either gravity or suction fed with chemical resistant seals. (two - three light coats) Product sizes: 1 Litre and 5 Litre | |
| Cut Back for Stainless SteelEnduroClean Cut Back for Stainless Steel is cleaner specifically formulated to prepare stainless steel surfaces for the application of EnduroShield. Major Benefits: 1) Non streak formula 2) Very effective at removing oily residues. Suitability: All stainless steel surfaces. Coverage: Depending upon the conditions (temperature, wind, indoors or outdoor application) coverage rate will vary. Good conditions will clean 30 - 40 square metres per litre of ready made cleaner. Application Methods: Spray and clean with a damp microfiber cloth Product sizes: 1 Litre |
|
 |
|
 |
|
© SMB Associates. All Rights Reserved (Terms of Use)