Frequency Range-MHZ	2400~2483
Bandwidth-Mhz	83
Gain-dBi	24
Vertical Beamwidth- degree	10
Horizontal Beamwidth- degree	14
F/B ratio-dB	≥31
VSWR	≤1.5
Nominal Impedance-	50
Polarization	Vertical or Horizontal
Maximum Power-W	100
Connector	N Female or Customization
Antenna Dimension-m	0.6*.09
Weight-Kg	2.5
Mounting Mast Diameter-mm	∅40~50

Frequency Range-MHZ	5725 ~ 5850
Bandwidth-Mhz	125
Gain-dBi	24
Vertical Beamwidth-	12
Horizontal Beamwidth-	9
F/B ratio-dB	≥20
VSWR	≤1.5
Nominal Impedance-	50
Polarization	Vertical or Horizontal
Maximum Power-W	100
Connector	N Female or Customization
Antenna Dimension-m	0.3*0.4
Weight-Kg	1.4
Mounting Mast Diameter-mm	∅40~50

Frequency Range-MHz	2400~2483
Bandwidth-MHz	83
Gain-dBi	4.5	6	8	10	12
Vertical Beamwidth-	35	28	16	10	7
VSWR	≤1.5
Nominal Impedance-Ω	50
Polarization	Vertical
Maximum POwer-W	100
Connector	N Female
Antenna Dimension-mm	300	400	515	780	1100
Weight-Kg	0.15	0.2	0.25	0.35	0.4
Mounting Mast Diameter-mm	Ø30~50

Frequency Range-MHz	2400~2483
Bandwidth-MHz	83
Gain-dBi	2
VSWR	≤1.5
Nominal Impedance-Ω	50
Polarization	Vertical
Maximum Power-W	50	50	50	10	50
Connector	SMA Male		BNC Male	SMA Male		MMCX Male or SMA Male
Antenna Dimension-mm	95	55	200	250	138
Weight -g	20		30	40	12

Frequency Range-MHz	5725~5850
Bandwidth-MHz	125
Gain-dBi	6	8	10	12
Vertical Impedance	25	16	10	7
VSWR	≤1.5
Nominal Impedance-Ω	50
Polarization	Vertical
Maximum Power-W	100
Connector	N Female
Antenna Dimension-mm	Ø20*260	Ø20*350	Ø20*400	Ø20*600
Weight-g	180	200	350	550
Mounting Mast Diameter-mm	Ø30~50

Freq. Range: 0-30 Mhz., 66-88 Mhz., 134-174 Mhz., 300-500Mhz., 800-896Mhz., 900-1800Mhz., 2.4-2.5 Ghz., 3-4Ghz., 5.7-5.8Ghz.,

Fibre Glass Directioinal Antenna
3 DB, 6DB

Collinear Antenna
3DB, 6DB, (DB

Grid Parabolic Antenna
21DB, 24DB, 27DB, 31DB

Flat Panel/ Patch Panel Antenna
8 DB, 12 DB, 15DB, 18DB

Ground Plane Antenna
0DB, 3DB, 6DB

Heliflex Antenna
0DB

Mobile Whip Antenna
0DB, 3 DB, 6DB, 0DB

Magnetic Mount Antenna
0DB, 3DB

Yagi Antenna
3DB, 6DB, 9DB, 12DB, 15DB

Omni Directional Antenna
3DB, 6DB, 8DB, 12DB, 16DB

Sectorial Antenna

Ceiling Mount Antenna
3DB

	Minimum	Typical		Maximum
Frequency Range-MHz	100	2400		6000
Insertion Loss-dB	0.1	0.2		0.4
Nominal Impedance-Ω	50
VSWR	1.1	1.2		1.4
Lightning Protection	Gas Tube Arrester
DC Breakdown Volatage-V	230
Impulse Breakdown Volatage-V(1Kv/μsMAX)	700
Surge Current-KA@(8/20μs)	10
Connector	N Female/N Female		N Male/N Female
Dimension-mm	68*Ø23
Weight-g	120

Flexible Heliax Cable

LDF 1-50	1/4”
LDF 2-50	(3/8”)
LDF 4-50 A	(1/2”)
LDF 4-5.50	(5/8”)
LDF 5-50 A	(7/8”)
LDF 6-50	(1-1/4”)
LDF 7-50 A	(1-5/8”)

Super Flexible Heliax Cable

FSJ 1-50 A	1/4”
FSJ 2-50	(3/8”)
FSJ 4-50 B	(1/2”)
VXL 5-5-	(7/8”)
VXL 6-50	(1-1/4”)
FSJ 7-50	(1-5/8”)

Rigid Cable RG 405 (.181)

LMR 100 A	CNT 100A
LMR 195	CNT 195
LMR 200	CNT 200
LMR 240	CNT 240
LMR 300	CNT 300
LMR 400	CNT 400
LMR 500	CNT 500
LMR 600	CNT 600
LMR 900	CNT 900
LMR 1200	CNT 1200
LMR 1700	CNT 1700

RF Coaxial and Microwaves Connectors

For Cables : RG-174, RG-188, RG316, RG-58, RG-62, RG-213, RG-8, RG-214, RG-217, RG-179, RG-6RG-11, RG-59,LMR 200, LMR 240, LMR 400, LMR 600

Connector Type:

BNC, TNC, N, UNF, Mini UHF, SMA, SMB, SMZ, F, MCX, MMCX, 1.5/5.6, FME, Twin axial, 1.0/2.3 DIN, 7/16 DIN

Type:

• Female Panel Mount
• Female Bulkhead
• Female Solder
• Male Solder
• Male Crimp
• Female Crimp

RF Heliax Connectors:

For Cables: Low Loss Coaxial, Heliax cable Connectors
Connector Type: N, DIN (1/4", 3/8", 5/8", 1/2", 7/8", 1-1/4"), LMR 200, LMR 400

RF Heliax Polarity Connectors:

For Cables: OD-RG-58, RG-213, LMR 200, LMR 240, LMR 400, LMR 600
Connector Type: BNC, TNC, N, SMA

Attenuators:

Type:  N, BMC, SMA, TNC
Watts: 0.5 W/1w/2w/5w/15w/25w/50w/100w/150w/200w

Terminations:

Types: N, BNC, SMA, TNC
Watts: 0.5w/1w/2w/5w/15w/25w/50w/100w/150w/200w

Surge Arrestors

Types: Gas Tube, Quarter-wave
Interface Typer: N, DIN 7/16

Power Splitters

Types: N, BNC, SMA, TNC, DIN 7/16
             2way, 3 way, 4way, 6way, 8way, 12 ways

Weatherproofing Kits
The cold shrink coax sealing kits are specially designed for the installation of mobile antennas and base stations. Cold shrink is the fastest way to secure a water-proof protection for connectors, splices and jumper-antenna interfaces. There are no tools required for a time-saving and easy way for installation. The shrinking process is done by removing (unwind) a core from inner side of the cold shrink kit.

Weatherproofing Tapes
The tapes and mastics are used for protection of connectors, splices and interfaces that are exposed to corrosive enviormental conditons. An additional feature is to prevent the loosing of connectors at jumper cable interfaces caused by vibration. With speacial design, it makes installing feeder cable easy, fast and cost effective. With tough and UV-resistant material, clamps can be characterized by durable, reliable for a long time run.

Cable Clamps
Cable clamp to support to coxial cable. With special design, it makes installing feeder cable easy, fast and cost-effective. With tough and UV-resistant material, clamps can be characterized by durable, reliable for a long time run.

Connection & Disconnection Modules Magazine Arrestor-Back Mount Frame DP Boxes-Tools