Industrial Automation Controllers

Analog controllers, accept input fem linear potentiometers and display in mm/ inch directly. Readings are accurate, low in maintenance and are available with 6 digit,7 segment bright display. These are widely used in market for their highly linear design and linearity limited by transducer specifications.

Features: 

• Micro controller based design
• 5 key keypad for parameter settings
• Standard up to two outputs available - can be configured in three different modes
• Available in 48x96x110m panel mount housing
• Display directly in mm / inch
• On site calibration facility for required length range
• Fast response
• Absolute / incremental reading display
• Operating voltage- 110vac / 230vac

Models: 

• A 400 V:only display facility
• A 402 V:length display facility with 2 outputs, which can be configured in 3 different modes
• A 400 V:analog output (0-10vdc) proportional to input length

We manufacture quality range of Encoder Controllers with custom built operation software.These controllers accept input from rotary encoders, linear scales & linear transducers and display directly in mm/inch with help of settable scale factor.Apart from this, these controllers do not miss even a single pulse at high speed or during direction change.

Model: ENCON

• Dedicated micro controller design
• 6 digit bright 7 segment display
• Facility for x2, x4
• Settable scale factor / decimal point for display directly in mm/inch
• High counting speed - >100 khz
• Input from rotary encoder / linear scale
• Compact size of 48 x 96 x 110mm
• Accepts 2 channel (a,b), 4 channel (a, abar, b, bbar)
• Marker Pulse an also be monitored
• Memory back up
• Standard upto 2 outputs
• Can be used to measure length / degree
• RS485 with modbus protocol (optional)
• Password protection (optional)
• Supply – 230VAC / 110VAC

Model: LCD based 

• Microcontroller design and intelligent controller
• 2 line backlit lcd display and 7 key keypad for ease of setting.
• Facility for x2, x4
• Settable scale factor / decimal point for display directly in mm/inch
• High counting speed - >100 khz
• Input from rotary encoder / linear scale
• Higher No. of inputs / outputs
  
• Available in size of 96 x 96 x 110mm
• Accepts 2 channel (a,b), 4 channel (a, abar, b, bbar)
• Memory back up
• Modular design, suited for shop floor environment
• It has more number of outputs and inputs
• Can be used to measure length / degree
• RS485 with modbus protocol (optional)
• Password protection (optional)
• Supply – 230VAC/ 110VAC

Accepts input from Pressure Transmitters output 4-20mA,0-20mA,0-10VDC and displays directly in Bar.

• Micro controller based Design
• 6 digit, 7 segment display
• 5 key keypad for setting of parameters
• Industrial design, immune to electrical noise
• Standard up to two outputs
• Input - 4-20mA /0-20mA,/ 0-10VDC
• Can be used for any capacity Transmitter
• On site calibration can be done
• Re- transmission output of 0 - 10VDC available.(Optional)
• Supply–230VAC/110VAC

Options :

 PRESSURE CUM LOAD Indicator/Controller

• Accepts input from Pressure Transmitter
• Can be used for any capacity Pressure Transmitter
• Two line display of 6 digit 7 segment display-one displays pressure and second displays proportional Load value
• Settable conversion factor for Pressure to Load value
• Available in size of 96x96x110mm
• Standard Two outputs available

Special Purpose controllers as per requirement with higher outputs or special purpose operation can be provided.

Features:

• Micro controller based design
  
• 6 Digit,7 segment display
  
• 5 key keypad for parameter setting.Input PNP/Potential Free
  
• Memory Back up for parameters set
  
• Settable Blades (no.of pulses per Rotation)
  
• Averaging Facility
  
• Time Out setting
  
• Speed of > 50,000 RPM
  
• Operating Voltage – 230VAC / 110VAC

Models: 6 digit 7segment display

Size: 48x96x110mm

Supply: 230VAC / 110VAC

R400- Input PNP Pulses, Settable Blades, Averaging facility, Time out facility

R402 – Input PNP Pulses, Settable Blades, Averaging facility , Time out facility, with 2 outputs for over speed and under speed cut off

RT400 – Rate Indicator displays directly in mm/Min or Mtr./min

LMD – Loss Motion Detector for Induction heating furnace, presses etc. In case Pulses stop coming the controller detect the same and gives a relay output for tripping of machine

R400V : RPM With Proportional Voltage output

RV400 : RPM Display proportional to input voltage 0-10VDC

In order to fulfill the ever changing demands of our clients, we have been engaged in offering a comprehensive range of Angle Indicators / Controllers. It is a device that can be both either electromechanical or electrical, which display rudder angle of the ship. These indicators device consists of a transmitter and several receivers that are situated on various places of the ship.Besides,various types of receivers can also be connected to the same transmitter.

Features:

• Optimum performance
• Durability

Stepper Motor Controllers are generally supplied as per specific requirements, Various models are available. and can be suited for various applications as Grinding, Back Gage, Indexing control etc. Unto 2 Axis closed controllers can be supplied with operation cycle as per requirement.

Features:

• LCD based model with keypad for setting of parameters.
• LCD based 7 segment display model also available.
• manual forward / revere motion. Auto cycle /manual cycle selection
• Inbuilt l/OS. For machine logic controller
• 1 Axis /2 Axis Closed Loop facility
• Operating voltage: 90-250vac

Our organization holds specialization in manufacturing and supplying an extensive range of Cam Controllers. We procure high grade raw material from reliable vendors, which is used in the production process. Being dimensionally accurate and durable, the controllers that we offer are widely used labs and r & d departments of various institutes and industries. Team of our logistic personnel ensure the delivery of consignments within the mutually decided time frame.

Features:

• Micro controller based design
• Memory backup
• 2 line lcd display with 1 7 key keypad for setting of parameters
• Pulse input-rotary encoder, linear scale, and linear transducers
• Inbuilt l/os used for logic control operation
• High counting speed - > 100 khz
• Settable scale factor and decimal point
• Facility for, x2,x4
• Compact size
• Output: solid state / potential free
• Supply: 90-260vac

Applications:

• Closed loop lndexing(linear / rotary)
• Controllers
• Universal rotary indexing controller
• Programmable limit switch
• Shut height controllers
• Cushion ht. Controllers
• Pipe bending controllers
• Back gauge controllers
• Cut-to-length controllers

We are one of the Leading manufacturers and suppliers of a range of Load Controllers that are microcontroller based. These controllers accept input from strain guage load cells and display exact values in gm, kg, tons as per the case. Our controllers are design to suit shop floor environment and have high accuracy, linearity & fast response.

Features:

• Microcontroller based design
• Display option of a) 2x6 digit 7 segment display or b) 2 line lcd display
• 7 key keypad for parameter setting
• Standard two outputs are available higher outputs also available
• Memory back up for over 10 years
• On site calibration of load. (load based / voltage based)
• Peak hold display facility
• Tare facility
• High accuracy and fast response
• Settable decimal point /max.Load
• Password protection for system parameters
• Outputs can be configured in three modes of operation
• Modbus communication facility (optional)
• Operating voltage - 230VAC- 15%