Industrial Automation Products

We probably have the widest range of counters ranging from simple reset counters, to multiple output counters with multiple settings. and Ranging from 6mm height display to 6 inch Jumbo Displays.

 

All this is possible only because of in house design and development facility.

 

We offer combination of Timers and Counters and I/Os all in a single unit. Designed to suit as per machine Logic.

 

Models in Size 72x72x110mm, Single Display

C740:

• 4 digit Bright 7 segment display

• Remote /Local Reset Facility

• Memory Back up

• Suited for Shop floor environment

• Operating Voltage – 230VAC / 110VAC

C741:

• 4 digit Bright 7 segment display

• Remote /Local Reset Facility

• Memory Back up

• 1 Relay output

• Single set Point

• Auto / Manual Reset

• Suited for Shop floor environment

• Operating Voltage – 230VAC / 110VAC.

C761:

• 6 digit Bright 7 segment display

• Remote /Local Reset Facility

• Memory Back up

• 1 Relay output

• Single set Point

• Auto / Manual Reset

• Suited for Shop floor environment

• Operating Voltage – 230VAC / 110VAC

 

In size 72x72x110, Dual display

CR761/C762:

• 2 x 6 digit Bright 7 segment display

• Remote /Local Reset Facility

• Memory Back up

• 1 Relay output / ( 2 Relay outputs-C762)

• Single set Point

• Auto / Manual Reset

• Suited for Shop floor environment

• Operating Voltage – 230VAC / 110VAC

CR762 : Same as CR761 with 2 Relay outputs

Can be used as –  Counter cum Rate Indicator,  Counter cum Totaliser,  Counter cum Batch Indicator. Etc.

In size 48x96x110

C400 :

• 6 digit Bright 7 segment display

• Remote /Local Reset Facility

• Memory Back up

• Suited for Shop floor environment

• Operating Voltage – 230VAC / 110VAC

C401 :

• 6 digit Bright 7 segment display

• Remote /Local Reset Facility

• Memory Back up

• 1 Relay output

• Single set Point

• 5 key key pad for parameter setting

• Input- Proximity/Potential free input

• Settable counting Speed (1 Hz.To 5 KHz.)

• Auto/Manual Reset

• Suited for Shop floor environment

• Operating Voltage–230VAC/110VAC.(Optional 90-250VAC)

C402:Same as C401 with 2 set points.

C401UD–C401 with UP/DOWN counting Facility.
Size 96x96x110mm

CR901:

• 2x6 digit Bright 7 segment display

• Remote /Local Reset Facility

• Memory Back up

• 1 Relay output

• Single set Point

• 5 key key pad for parameter setting

• Input- Proximity/Potential free input

• Settable counting Speed (1 Hz.To 5 KHz.)

• Auto/Manual Reset

• Suited for Shop floor environment

• Operating Voltage–230VAC/110VAC.(Optional 90-250VAC)

We manufacture Programmable Timers using micro controller based design to suit shop floor environment. We have a wide range of Timers that can be used for various applications.

 

Some of The Models are:

T741: This is a Universal Timer available is compact size of 72x72x110mm. Being Micro controller based design it has accurate Timing values to the precision of milliseconds.

 

Other features include:

• Time setting:Hour,Minute and seconds.(0.01 seconds to 9999Hrs.)

• Mode:OFF Delay,ON Delay,Single Cycle,Continuous Cycle,Preset

• Time start:On Power ON,On start Pulse

• Memory back up:In case of power failure the Time value is retained

T400:

Hour Meter:

This Timer is used to measure and record the Machine up Time and thus monitor the Breakdown of machine.

 

• Size: 72x72x110mm.
• Time range: 999.9 Hours
• Memory back up: In case of Machine Breakdown Time updation stops and retains the time value and when machine starts the Timer starts counting from the last time value
• Operating Voltage: 230VAC/110VAC

LMD (Loss Motion Detectors)

• It continuously monitors the incoming pulses Transition. The moment pulses stop coming for a certain period, a Relay output is energised with a message ‘trip’

• Finds Application in Induction Heaters, Forging Industries etc
• Loss Motion Detector available in size of 48x96x110mm
• Operating voltage – 110VAC / 230VAC (Optional 90-250VAC)
• Custom Built Timers as per requirements can also be manufactured an supplied

 

Sequential Timers are available in compact size of 96x96x110mm.

 

Features:

• Micro controller based design
• Industrial design immune to electrical noise
• Single sequence/cyclic sequence operation
• No.of channels selectable.
• Crystal generated timing-highly accurate
• Output- open collector/ potential free
• Time range settable from-milliseconds to hours.
• Supply voltage-230vac/ 110vac, (optional--90-250vac)

 

Operation mode:

• Common on and off
• Common on, individual off
• Individual on, common off
• Individual on and off

Models:

• ST0208: max. Upto 8 output selectable, size-48x96x1 50mm, 5 key keypad for parameter setting
• ST0516: max.Upto 16 outputs selectable, size-96x96x150mm, 2 line LCD display and 7 key keypad for setting of parameters

Our organization brings forth an exclusive array of Programmable Switches that are suitable to be used for shop floor environment.These timers are manufactured in sync with industrial standards and has find wide application in various industries. Timers offered by us are demanded in the market for their durable make, low maintenance and longer service life.Clients can purchase these from us at economical prices.

 

Some of the models are:

T741:

• It is available is compact size of 72x72x110mm
• Being micro controller based design it has accurate timing values for the precision of milliseconds

Other features includes:

• Time setting:hour, minute and seconds (0. 01 seconds to 9999hrs.)
• Mode: off delay, on delay, single cycle,continuous cycle, preset
• Time start:on power on, on start pulse
• Memory back up:in case of power failure the time value is retained

T400:

Hour meter:

• This timer is used to measure and record the machine up time and thus monitor the breakdown of machine.
• Size–72x72x110mm.
• Time range of 999.9 hours.

 

Memory back up:

• In case of machine breakdown time updation stops and retains the time value and when machine starts the timer starts counting from the last time value
• Operating voltage: 230vac / 110vac

 

LMD (Loss Motion Detectors)

LMD continuously monitors the incoming pulses transition. The moment pulses stops that are coming for a certain period and a relay output is energised with a message ‘trip’. It finds its appliocation in induction heaters as well as forging industries.

 

• Loss motion detector available in size of 48x96x110mm
• Operating voltage – 110vac / 230vac (optional 90-250vac)

 

Speed / RPM Indicators & Controllers

We are engaged in manufacturing and supply a quality-approved gamut of Speed / RPM Indicators & Controllers. Developed using premium grade components, this array of equipment is widely demanded across different industries. Our quality controllers ensure that these products are well-tested on different quality parameters before the final dispatch. These controllers provide memory back up for parameters set.

 

• Microcontroller based design
• Digit, 7 segment display
• Key keypad for parameter setting
• Input pnp/ potential free
• Settable blades (no. Of pulses per rotation)
• Averaging facility
• Time out setting
• Speed of > 50,000 rpm.
• Operating voltage – 230vac / 110vac

Model: 6 digit 7 segment display

Size: 48x96x110mm
Supply: 110vac and 230vac

• R 400- input pnp pulses, settable blades, averaging facility , time out facility.
• R402 – input pnp pulses, settable blades, averaging facility , time out facility, with 2 outputs for over speed and under speed cut off
• RT 400 – rate indicator displays directly in mm/min or mtr. / min.
• LMD – loss motion detector for induction heating presses. In case pulses stop coming the controller detect the same and gives a relay output for tripping of machine.
• R 400 V : rpm with proportional voltage output
• RV 400 : rpm display proportional to input voltage 0-10vdc

Jumbo Displays For Production Counters With PC Interface provided by us has a counters display that shift wise production VIS a VIS target for monitoring on line and can also be connected to the PC where the data is stored for later analysis. If there is any discrepancy in the target set the production achieved is analyzed to reduce the production downtime. Size of the counter display ranges from 2 inch to 6 inch depending on the distance to be viewed. Furthermore,multiple displays are provided such as shift current, shift target, cumulative.

Features:

• Optionally a clock to display the time
• Durability
• Excellent performance