Our universal testing machines are largely admired by the industry and find a wide application. It has been specialy designed for testing metals and other materials under tension, compression bending, transverse and shear loads. It is equally suitable to carry out hardness test on metals.

Technical features of our universal testing machines are:

• Loading Accuracy as high as + 1%
  
• Straining at variable speeds to suit a wide range of materials.
  
• Printer supplied as option to enable study the behavior of the material
  
• Motor driven threaded columns for quick effortless adjustment of lower cross-head-to facilitate rapid fixing of test specimen.


• Simplicity in reading because of digital readouts.
  
• Wide range of standard and special accessories, including load stabilizer.
  
• Easy change from plain to threaded and screwed specimens.
  
• Large effective clearance between columns enables testing of standards specimens as well as structures.


• Simple controls for easy of operation.
  
• Robust staining frame of an extremely rigid construction.
  
• Safe operation ensured be means of safety devices.
  
• Fully enclosed and protected pendulum.
  
• Optional serial port to transfer data to computer for analysis /storage etc.

Servo (Dynamic) hydraulic universal testing machines which are used in a variety of tests like tension compression flexure fatigue (low cycle fatigue / high cycle fatigue / fatigue crack propagation ASTM E647), fracture mechanics (K1c per ASTM E399, J1c, CTOD per ASTM E-1290), damping properties and vibration testing.

Our test systems are designed for conducting tests at ambient temperature, elevated temperature (high temperature fatigue characterization) and low temperature.

Test speed range slow strain rate testing (typical of corrosion interaction)(1 x 10 -7 /s strain rate) high strain rate testing (flow deformation studies).(150 /s true strain rate)

The testing machines are fitted with servo-controlled pumps that come in two versions: hard-wired autonomous control with electronic setting of operating high and low pressure. Operating pressure is set with the convenience of on-screen graphics user interface.

Technical features of our hydraulic materials test systems are:

• Metals, composites and polymers
  
• Low cycle fatigue (as per ASTM E606)
  
• Fracture mechanics including fatigue crack growth (as per ASTM E647 and E1820).
  
• Room temperature and high temperature testing
  
• Testing in corrosive media
  
• Fully self -contained test system packaged for easy relocation and movement
  
• Load frame on vibration isolators
  
• No additional utilities required. Simply plug into 3- phase mains and commence testing
  
• 10 to 50 kN force and 50 to 100 mm stroke rating
  
• 0 to 100 Hz cycling frequency. Vibration isolators for quiet operation
  
• Variety of add- on fixtures and transducers, all supported by single - platform packaging: self- aligning hydraulic LCF grips, extensometers, pulsed, reversible p.d. unit, etc


• Provision for elevated temperature testing with self-contained closed loop cooling

We export premium quality hardness testersines which are renowned for providing unmistakable measurements. The components used in our hardness testers are of flawless construction, enhancing reliability.

Technical features of our Hardness Testersines are:

• Digital Hardness Tester for Rockwell Tests, motorised for automatic operation cycle i.e. load/dwell/unload
.

• Preliminary Test Force - 98.07N (10kgf)
  
• Total Test Force - 588.4, 980.7, 1471N (60,100,150 kgf)
  
• Test Force Selection by external dialing
  
• Set position with LED bar indicator for easy operation.
  
• Keyboard entry through reliable membrane switches for scale/GO-NOGO/Dwell time selection.


• Large size scale display for easy reading with 0.1 Rockwell Resolution.
  
• Parallel output for connecting dot matrix printer to get results indicating serial number of tests, hardness scale, hardness value and high / good / low indication.
  
• Analog / Dial Type also available

We export high quality Vickers Hardness Tester that has a built in projection screen to get accurate results. It can take test loads of - 5, 10, 20, 30 & 50 kgf with an optical magnification of - 70 X. It provides a simple and accurate means to produce and measure the diamond indentation. These testers are suitable for measuring the hardness of precision metallic parts with wide testing range from soft to hard and their accurate results are widely acclaimed. These testers strictly conform to IS : 1754 - 1968 and have a scale least count of 0.001 mm.

The testing range of this tester is very wide, ranging from soft metal such as lead, upto the hardest, like hardened steel. Same hardness number is obtained on the same specimen, regardless of the load applied. The indentation is tiny and allows testing of a precision finished part. Loading and unloading cycle is motorised.
These testers have following technical specifications:

• Test loads - 5, 10, 20, 30, 50 kg
  
• Magnification of optical projection - 70 X
  
• Maximum test height (mm) - 200
  
• Scale Least Count (mm) - 0.001
  
• Throat Depth (mm) - 135
  
• Machine dimension (mm) - L 585 x W 290 x H 860
  
• Weight (approx) - 70 kg
  
• Power Supply - 220 VAC, 50Hz, 1-Phase

We deal with high precision impact testing machines that are technologically advanced and durable. These machines have following technical specifications:

• 300 Joule for Izod and Charpy in analogue and digital version.
  
• 21.68 Joule machine for plastic and other materials.
  
• Single tooth manual notch cuter Izod /Charpy sample.
  
• Inclined Impact Tester to check horizontal impact.

We also export high performing abrasive cut off machines that allow a cool, burn free sample production and ensure an absolute minimal deformation. These machines possess a robust construction and rigid clamping thus minimizing wheel breakage.

Technical features of our Abrasive Cut Off Machines are:

Effortless cutting by lever mechanism, counter balancing of motor.

Large and Effective coolant delivery by unique design of casted wheel guard with focused vains.

Control Panel incorporates door limit switch, emergency stop, illumination on/off & machine-on, switches. Indications of door open, power on, pump on. Covering other safety norms.

Dedicated wheels for very hard , medium hard , soft components and universal wheel, in 10 " , 12 " & 14 " , thickness 1.5 mm ,2 mm , 3 mm resp.,hole sizes 1" or 1.25" , ( Al2O3 )

Roomy Cutting Chamber. Side insertion port with anti splashing guard. Large viewing window, shatter resistance glass with sweeping wiper. Even illumination. Enamel painted ( Fiber hood-optional)

Variable speed Grinding Lapping machine

Mounting Press (manual/Auto)

Jominy End Quench Harden ability set up

Image Analyzer system
These abrasive cut off machines have a cutting Capacity of: 60 / 80 / 100 / 120 / 150 round

We export specially designed Jominy End Quench Harden Ability Set Up equipped with special furnace with DTC. Thyristor controlled panel installed avoids temperature over shooting and at the time three Jominy tests can be carried out.

Our Jominy End Quench Harden Ability Set Up has following features.

.
• Quick transfer of specimen to quenching fixture within specific time with the special tong.
  
• Quenching fixture designed strictly as per BS / SAE with specifications like 45o angle of top plate, quenching distance, jet stopper release just before quenching etc.


• Motorised Water Circulation with storage & test tank.
  
• Hardness testing fixture for progressive hardness indentations.

We deal with the export of oscillating disc rheometer that has an advantage of computer controlled automated testing, and continuous repeated testing.The window environment provided is easy to operate, nad the rheometer has a huge capacity of data storage and retrieval. It provides color printouts, multiple color coded graphs for easy separation of batches with flexible testing timings. It has an added advantage of stastical computation of data, fast temperature recovery, and automatic computation of results at the end of test sequence.
The technical specifications of the oscillating disc rheometer are as follows.

• Sample Volume Approx. 8 CM^3.
  
• Oscillating Disc Frequency 100Cycles/Min (1.66Hz).
  
• Oscillating Amplitude +/- 1 Deg, 3 Deg, 5 Deg, and Microprocessor Temp. Controller Calibrated range 100~200 Deg C.


• Directly shaft mounted inline with oscillating disk.
  
• Directly online display on monitor.
  
• Air Pressure 60 PST,4.2Kg/Cm ²

We export precision engineered moving die rheometers with Elastic Modules, Tan Delta ,Initial, maximum Torque, Rotor less, Viscous Modus, Cure rate, Minimum torque, Scorch points , Smaller Sample size.

This rheometer has following technical specifications.

• Viscous and Elastic S’ Modulus (torques)can be separated.
  
• Choice of display S’ or tan and along with elastic Modulus.
  
• Automated Testing, Online Display of Torque vs. Time graph.
  
• Graphical Comparison of results.
  
• Sample Volume Approx. 6 CM^3.
  
• Oscillating Disc Frequency 100Cycles/Min (1.66Hz).
  
• Oscillating Amplitude +/- 0.5 Deg, 1 Deg, 3 Deg, and microprocessor Temp. Controller Calibrated range 100~200 Deg C.


• Air Pressure 60 PST, 4.2Kg/Cm2.

We export superior quality laboratory equipments used for a variety of applications. These include:

• B.O.D. Incubators
  
• Climatic Chamber
  
• Auto Clave
  
• Humidity Chamber
  
• Salt Spray Testing Chamber
  
• Walk in Humidity Chamber
  
• Furnaces- Muffle, Heat Treatment