In-line gear motors (Electric Gear Motors) fall under Bonfiglioli Products category in the segment of motors & brakes devices. You can use these for all in-line drive applications. Flange mounting at any mounting position is possible, that makes it easier to install.

Technical specifications of In-line gear motors are as mentioned below:

Transmissible torque: 30 Nm... 7.200 Nm

Rated power (n1= 1400 min-1): Up to 140 kW

Gear ratios: iN = 4,5 ... 185

Output Configurations: Solid Keyed Shaft

Input Configurations: IEC motor mounting provision, Solid Input Shaft

Applicable motors: IEC-normalized Motors, up to 45 kW, Single and Dual Speed Version

Main Brake Features:
• DC or AC supply
• Fast Braking and/or brake releasing through SB
• NBR, SBR optional electronic devices

Main Motor Options:
• Thermistors and Thermostats sensor
• Forced Ventilation
• Line Driver and Push-Pull Incremental Encoder

AS Series of our products differ in their torque measurements:

Type	Torque Nm
AS 16	45
AS 20	90
AS 25	180
AS 30	320
AS 35	480
AS 45	720
AS 55	1.200
AS 60	2.100
AS 80	3.800
AS 90	6.200

Our AC motors comply with EMC and LV directives. These are available in the 0.06 - 30 kW range in the foot and the flange mounting version.

Technical specifications of AC motors are as mentioned below: kW rating (4 pole): 0,06 kW ... 30kW

Frame Sizes: 25 nos

Pole Numbers: 2, 4, 6, 8, 2/4, 2/8, 2/12, 4/6, 4/8

Mounting Options:
• Foot IM B3
• Flange Im B5 and IM B14

Operation: 50 Hz and 60 Hz

Compliance: CEE 73/23 (LVD) and CEE 89/336 (EMC)

Inverter Duty: All Frame Sizes

Housing: Cast Alluminium

Main Brake Features:
• DC and AC supply
• Faster Brake Engage/Disengage through Electronically
• Controlled AC/DC Rectifier type SB, NBR, SBR (option)

Main Options:
• Thermistors and Thermostates sensor
• Separate Supply Forced Ventilation
• Line Driver and Push-Pull Incremental Encoder
• CSA and UL Approved Design

Our products in BN series vary in following measures:

Type	kW	Type	kW
BN 56A	0,06	BN 90LB	1,85
BN 56B	0,09	BN 100LA	2,2
BN 63A	0,12	BN 100LB	3
BN 63B	0,18	BN 112M	4
BN 63C	0,25	BN 132S	5,5
BN 71A	0,25	BN 132MA	7,5
BN 71B	0,37	BN 132MB	9,2
BN 71C	0,55	BN 160MR	11
BN 80A	0,55	BN 160M	15
BN 80B	0,75	BN 180M	18,5
BN 80C	1,1	BN 180L	22
BN 90S	1,1	BN 200L	30
BN 90LA	1,5

We offer international quality three phase induction motors that have much wider application and are capable of performing heavy duty and are very much reliable among the customers. Our product 3-phase induction motors have some salient features like :

• Motors up to 80 frames in Aluminium
• Pressure Die-cast and higher frames in Cast Iron Components
• Performance Conforming to IS:325
• Mounting Dimensions as per IS:1231 and IS:2223
• Insulation Class F, Suitable for Ambient of 45 Deg. C
• Degree of Protection IP 55
• Supply Conditions : 3 Phase AC, 415 +- 10%, 50 Hz +- 5%, Combined Variation +- 10%

We are exclusive distributors of MGM Brake Motors. MGM is one of the biggest manufacturers of Brake motors in Italy.

MGM Brake Motors series are: BA and BM.

Features of BA Series Brake Motors:

• The BA Series consists of three phases, asynchronous brake motors TEFC.
• The brake power supply is AC 3 phase standard.
• The BA series ranges from 71 right up to 225 frame size.
• These are are provided with a manual brake release.

Our Bonfiglioli planetary drives are powerful and compact drives to serve in heavy duty applications. This product is versatile in terms of mounting, gear layout, interface and shafts.

Technical specifications of planetary drives are as mentioned below:

Torque Range: 1000 - 450.000 Nm

Transmissible Mechanical Power: to 450 kW

Reduction Ratios Range: 1:3,4 to 5.000

Gear Unit Version: In line; Right angle (with bevel gear pair Gleason)

Output Configuration: Foot and flange mounted

Output shaft: solid with key, splined, splined hollow, hollow shaft with shrink disc

Gear Unit Input Configurations: IEC-normalized Motor Adapters; Solid Input Shaft

Applicable AC motors:
• Compact motors and brake motors M series
• IEC motors and brake motors BN series
• Single and dual speed motors

Main Brake Motor Features:
• DC and AC brake
• Fast Braking and/or brake releasing through
• SB, NBR, SBR optional electronic devices

Main Motor Options:
• Thermistors and thermostats sensor
• Servo ventilation
• Line driver and push-pull incremental encoder

300 Series of our products differ in their torque measurements:

Type	Torque Nm
300	1.000
301	1.250
303	2.500
305	5.000
306	8.500
307	12.500
309	18.500
310	25.000
311	35.000
313	50.000
315	80.000
316	105.000
317	150.000
318	200.000
319	300.000
321	450,000

Our worm gears are milestones for the industry worldwide. We offer choices in terms of mounting options, shaft pattern and motor interface. We have its variants in helical worm and double worm, and these differ with or without torque limiter.

Technical specifications of worm gears are as mentioned below:

Torque Range: 13 Nm... 7.100 Nm

Mechanical Rating (n1= 1400 min-1):0,04 ... 75 kW

Gear ratios: 7 ... 10000

Output Configurations:
• Keyed Hollow Shaft
• Plug-in Solid Output Shaft
• Torque Limiter as an Option

Input Configurations:
VF and W: IEC-standard motor adapter
VF and W: solid input shaft
W: integral gearmotor

Applicable AC motors:
• VF and W: IEC-standard motors and brake motors - BN series
• W: compact motors series M
• Single and dual speed motors

Main Brake Features:
• DC and AC supply
• Faster Brake Engage/Disengage through Electronically
• Controlled AC/DC Rectifier type SB, NBR, SBR (options)

Main Motor Options:
• Thermistors and Thermostats sensor
• Separate Supply Forced Ventilation
• Line Driver and Push-Pull Incremental Encoder

VF and W Series of our products differ in their torque measurements:

Type	Torque Nm
VF 27	13
VF 30	24
VF 44	55
VF 49	88
W 63	190
W 75	320
W 86	440
W 110	830
VF 130	200
VF 150	1.500
VF 185	2.000
VF 210	5.000
VF 250	7.100

Our products Helical Bevel Gears in this range have proved to be efficient and versatile in terms of cost effectiveness and efficiency.

Technical specifications of AC Helical-bevel gear motors are as mentioned below:

Torque Range: 150 Nm... 14.000 Nm

Mechanical Rating (n1= 1400 min-1): 0,22 ... 150 kW

RAO Mechanical Rating (n1= 1400 min-1) :20 kW .... 276 kW Gear ratios: 5,4 ... 1715 RAO Gear ratios: 9,5 ... 168

Output Configuration:
• Foot and Shaft mount - Two Bore Options per Size
• Keyless Shrink Disc Fitting
• Metric or Inch series Solid Output shaft

Input Configurations:
• IEC and NEMA motor Adapters
• Metric or Inch series Solid Input Shaft

Applicable AC motors:
• Integral motors and Brake motors - M series
• IEC-normalized Motors and Brake motors - BN series
• Single and Dual Speed Motors

Main Brake Features:
• DC and AC supply
• Faster Brake Engage/Disengage through Electronically
• Controlled AC/DC Rectifier type SB, NBR, SBR (options)

Main Motor Options:
• Thermistors and Thermostats sensor
• Separate Supply Forced Ventilation
• Line Driver and Push-Pull Incremental Encoder “A” and “RAO” Series of our products differ in their torque measurements

Our clutch brake units are compact and easy to install. These units are closed using IP54 protection methodology and do not need any maintenance or adjustment of magnetic gap.

Technical Specifications:
• Torque Range: 8 Nm ... 75 Nm
• Max. Inputted Speed: 3.000 min-1
• Max. Work per each Braking: 7 KJ ... 55 kJ
• Max. Work per Hour: 260 KJ/h ... 360 kJ/h
• Max. Work between service: 280 MJ ... 1220 MJ

Installation: Both Horizontal and Vertical Permitted

Input and Output Configuration: Both Solid and Hollow Shaft Available

Mounting Options:
• Both Horizontal and Vertical Permitted
• Foot: Available
• IM B5 Flange: Available
• IM B14 Flange: Available
• NFF Series Clutch-brake units’ variants:

Type	Torque Nm
NFF 07	8
NFF 09	15
NFF 11	30
NFF 14	75

We are engaged in providing Agitators & Mixers of international quality that have much wider application and are capable of performing in all conditions. Some of the features of our Agitators & Mixers are:

• Low Speed Geared Stirrers EL Model.
• For mixing highly viscous fluids our low speed geared stirrer provided with marine type impeller are used.
• If desired speed is lower than 360 RPM, then turbine type impellers are provided.
• Anchor type impellers are provided for complete mixing. This ensures that batch does not settle down inside the tank.
• Motors from 0.5 HP to 3 HP can be supplied for this range. Customized solutions as per clients’ requirements are provided here.

Our MAGNA welding alloys can be used for various welding purposes like Arc welding, gas welding, brazing and soldering. Welding needs a great combination of concentration and perfection. This involves theories of chemistry, physics and metallurgy altogether. Our welding alloys have some salient features like:

• Ease of Application
• Great Versatility
• Better Physical Properties

We produce various kinds of industrial valves as per specified requirements from our customers. Customized solution is highly used for this category of our products. Valves that we produce are:

• Wedge gate
• Knife gate
• Globe
• Swing check
• Control Valves
• Tilting disc check
• Ball valves

Some of the salient features of our products in this category are:

• Testing and design standards of MSS SP81 and TAPPI TIS 405.8 are conformed
• Full Lug pattern.
• Tapping and drilling are done to suit 150 flanges of ANSI class.
• Heavy gate to increase gate and stem life.
• Wiper ring in stuffing box
• Impregnated asbestos free packing good for temperature upto 450F / 232 C and PH2-12 Viton resilient seat good for temp upto 300 F/150 C

Specifications	Choice of 4 Models
		TC 4815	TC 4815 D	TC 4815 S	RC 4815 D
Max. Speed	RPM	16000	16000	16000	16000
Max. RCF	x g	17600	17600	17600	17600
Max. Tube Size	ml	5	5	5	5
Max. Capacity	ml	32	32	32	32
Lowest Temp.	Deg. Celsius	NA	NA	NA	-10
Width	mm	360	360	360	720
Depth	mm	400	400	400	450
Height	mm	350	350	350	400
Weight	Kg	23	23	25	63
Connected Load	Kva	0.3	0.3	0.3	0.9

Our product TC4815D is a micro centrifuge used as laboratory instrument. It finds usage in chemical and pharmaceutical industries. This unit has step less speed control, speed indicator and timer.