Hy Tek Grant Instruments

Our AC motors comply with EMC and LV directives. These are available in the 0.06 - 30 kW range in the foot and the flange mounting version.

Technical specifications of AC motors are as mentioned below: kW rating (4 pole): 0,06 kW ... 30kW

Frame Sizes: 25 nos

Pole Numbers: 2, 4, 6, 8, 2/4, 2/8, 2/12, 4/6, 4/8

Mounting Options:
• Foot IM B3
• Flange Im B5 and IM B14

Operation: 50 Hz and 60 Hz

Compliance: CEE 73/23 (LVD) and CEE 89/336 (EMC)

Inverter Duty: All Frame Sizes

Housing: Cast Alluminium

Main Brake Features:
• DC and AC supply
• Faster Brake Engage/Disengage through Electronically
• Controlled AC/DC Rectifier type SB, NBR, SBR (option)

Main Options:
• Thermistors and Thermostats sensor
• Separate Supply Forced Ventilation
• Line Driver and Push-Pull Incremental Encoder
• CSA and UL Approved Design

Our products in BN series vary in following measures:

Type	kW	Type	kW
BN 56A	0,06	BN 90LB	1,85
BN 56B	0,09	BN 100LA	2,2
BN 63A	0,12	BN 100LB	3
BN 63B	0,18	BN 112M	4
BN 63C	0,25	BN 132S	5,5
BN 71A	0,25	BN 132MA	7,5
BN 71B	0,37	BN 132MB	9,2
BN 71C	0,55	BN 160MR	11
BN 80A	0,55	BN 160M	15
BN 80B	0,75	BN 180M	18,5
BN 80C	1,1	BN 180L	22
BN 90S	1,1	BN 200L	30
BN 90LA	1,5

We are engaged in providing Hytek Agitators & Mixers of international quality that have much wider application and are capable of performing in all conditions. Some of the features of our Agitators & Mixers are:

• Low Speed Geared Stirrers EL Model.
• For mixing highly viscous fluids our low speed geared stirrer provided with marine type impeller are used.
• If desired speed is lower than 360 RPM, then turbine type impellers are provided.
• Anchor type impellers are provided for complete mixing. This ensures that batch does not settle down inside the tank.
• Motors from 0.5 HP to 3 HP can be supplied for this range. Customized solutions as per clients’ requirements are provided here.

We are exclusive distributors of MGM Brake Motors. MGM is one of the biggest manufacturers of Brake motors in Italy.

MGM Brake Motors series are: BA and BM.

Features of BA Series Brake Motors:

• The BA Series consists of three phases, asynchronous brake motors TEFC.
• The brake power supply is AC 3 phase standard.
• The BA series ranges from 71 right up to 225 frame size.
• These are are provided with a manual brake release.

Product Code:

MGM-Brake-Motors

In-line gear motors (Electric Gear Motors) fall under Bonfiglioli Products category in the segment of motors & brakes devices. You can use these for all in-line drive applications. Flange mounting at any mounting position is possible, that makes it easier to install.

Technical specifications of In-line gear motors are as mentioned below:

Transmissible torque: 30 Nm... 7.200 Nm

Rated power (n1= 1400 min-1): Up to 140 kW

Gear ratios: iN = 4,5 ... 185

Output Configurations: Solid Keyed Shaft

Input Configurations: IEC motor mounting provision, Solid Input Shaft

Applicable motors: IEC-normalized Motors, up to 45 kW, Single and Dual Speed Version

Main Brake Features:
• DC or AC supply
• Fast Braking and/or brake releasing through SB
• NBR, SBR optional electronic devices

Main Motor Options:
• Thermistors and Thermostats sensor
• Forced Ventilation
• Line Driver and Push-Pull Incremental Encoder

AS Series of our products differ in their torque measurements:

Type	Torque Nm
AS 16	45
AS 20	90
AS 25	180
AS 30	320
AS 35	480
AS 45	720
AS 55	1.200
AS 60	2.100
AS 80	3.800
AS 90	6.200

Product Code:

In-Line-Gear-Motors

Premium efficiency motors

We offer international quality three phase induction motors that have much wider application and are capable of performing heavy duty and are very much reliable among the customers. Our product 3-phase induction motors have some salient features like :

• Motors up to 80 frames in Aluminium
• Pressure Die-cast and higher frames in Cast Iron Components
• Performance Conforming to IS:325
• Mounting Dimensions as per IS:1231 and IS:2223
• Insulation Class F, Suitable for Ambient of 45 Deg. C
• Degree of Protection IP 55
• Supply Conditions : 3 Phase AC, 415 +- 10%, 50 Hz +- 5%, Combined Variation +- 10%

Product Code:

3-phase-induction-motors