Booths and Plants

Scaling new heights & laying new fundamentals of technology, we also offer various Pretreatment Plants to meet clients' specific requirements, like:

• 7 - 9 Tanks dip Zn phosphating plant.
• Single stage Industrial Spray cleaning cum drying machine.
• Indexing type Spray cleaning machine.

Totally free of Hazardous Chlorinated Solvents, C.F.C. or Flammable Chemicals, they perform both mechanical (spray) and chemical cleaning actions. They can be easily conveyorised, require minimal effluent treatment with Iron Phosphate. Ideal for medium to high volume cleaning operations, they also require minimum operator labour input.

They also offer choices of Dipping or Spraying application, Iron or Zinc Phosphating Solutions, Separated Cleaning and Phosphating Zones or Combined Chemical Zones.

Powder Coating booth mainly in two parts. (i.e. one is working area & other recovery unit).

Working size depends upon the components to be coated.

Filtered Air Inlet System can be provided in the booth to get good (dust free) quality of powder coating.
Powder coating booth can be make batch type as well as Conveyorised.

In the cyclone based powder coating booth, over sprayed powder get collected in the Hopper and due to high velocity-suction, it get carried to cyclone. In the cyclone, with spiral action, Powder get collected in the container and air goes out through ducting. This collected powder can be reuse. High velocity suction is created with centrifugal fan.

In this system cyclone provided are of single or twin design to achieve high efficiency of Collecting powder.

For proper functioning of the Powder Coating Booth, following to be observed.  
 - Direction of the impeller should be correct.
 - All joints on suction sides to be leak proof.
 - Rubber sleeve and gasket of the containers should be properly fitted to ensure absolute no leakage of air.

Side Draft Water Wash & Down Draft Water Wash Painting Booth are used for painting of components.
In side draft water wash two types 1) Bench type booth & 2) Dull depth w/w painting booth.
The above booths are useful for small or light weight components. Painting can be done by stand one position.

For heavy component down draft water wash painting booth is useful. In this booth operator can paint the job by moving all around it. As an optional filtered air inlet system & water curtain arrangement can be provided.

Features :-

1) Adequate exhaust result in effective removal of overspray paint particles & thus eliminates its settling on wet painted surface.
2) Also provides clean air to the operator.
3) Washing action minimizes escape of paint along with exhaust air & thus eliminating surrounding pollution and also elimination of fire risk.

Principal of Working :

In the water wash spray booth, a stream of air at very high velocity licks the surface of the water, entraining a large of water in the air. This water will contain paint particles also. This mixture traveling at a very high velocity is forced to make a number of carefully controlled changes in direction, before its path straightens out inside the washing chamber of the booth.

Because of the curved path, the heaviest paint & water particles are thrown out of separated from the air stream by centrifugal force experienced. The deflector and eliminator plates prevent any of water and paint particles to escape through the exhaust. The water and paint (pigment) particles are returned to the tank with the help of return trough.
The alkali based booth additive help is killing the paint and added waste oil prevents paint particle coagulation.

For proper functioning of the spray booth following points to be observed.
 - Always water level should be above the 'C' plate by 6-10 mm.
 - 'C' plate should be sloping forward by 4-8 mm.

We also offer Painting Plant for the automotive repair industry and other industrial sectors like : wood, metal, plastic, automobile, nautical, aeronautical. Featured with high production quality & best possible environment, it offers maximum safety. Considering workload and various fatigue factors, these plant requires less maintenance & also have longer working life. It is a typical Conveyorized Liquid Spray Painting Plant and consists of Back-To-Back Spray Painting Booths, Flash Off Zone, Gas Fired Paint Baking Oven & Overhead Conveyor. Designed as per production requirement, space availability & available heat source, it gives continuous production & good painting quality.