Gem Allied Industries Private Limited

All fuse links are certified for A.C performance & comply with the requirements of IS-13703-1993 & having a breaking capacity of 80 KA at 415V A.C fusing factor : 1.6, Non-fusing, factor 1.2.Fuselink with OFFSET & CENTRAL TAG (bolted type) available from  2 AMP to 630 Amp. Fuse links with OFFSET TAG (Blade type) available from 2A to 32A. Insulated House Service Cutouts and Fuselinks - Totally insulated body of Phenolic moulding non-hygroscopic giving  improved mechanical strength.The phase terminals can accommodate two outgoing and two incoming cables ranging from 6 mm2 to 35 mm2. It can accommodate fuses as per B.S. 1361 - 1971. In a comprehensive range of ratings from 15 Amps to 80 Amps.

300A Underground Fuse Cut Out -

 The Cut Out Accepts 82mm J type fuse links and a Maximum Fuse rating of 300 A. It complies with BS 88 & 7656. Moulded in Glass reinforced Polyester DMC fitted with Cable entry and exit Grommets. The Maximum Cable Size 185 mm2 with an optional neutral link.

400A Pole Mounted Transformer Cut Out -

The Cut Out Accepts 82mm J type fuse links and a Maximum Fuse rating of 400 A. It complies with BS 7656:1993. Moulded in Glass reinforced Polyester DMC fitted with Cable entry Grommets with IP23 Degree of Protection. The Maximum Cable Size 300 mm2.

Designed, developed and manufactured to the exact requirement of the customers, our range of power transformers comes in three main types, viz distribution/ power transformers, HT Two in one transformer and Ultra isolation transformers.

Distributor Transformer :

 We are supplying reputed manufacturer transformer, they are manufacture state of the art technology Low Loss, High Efficiency Power Distribution Transformers catering to the Indian as well as International Market. The Equipment has been designed & produced as per IS & IEC standards. We are supplying of Distribution Transformers and Power Distribution Transformers from 10 KVA to 20000 KVA up to 33 KV Class & Furnace Transformers (Arc & Induction) up to 5000 KVA.

HT Two In one System/HT AVR :

We are supplying reputed manufacturer transformer, they are manufacture state of the art technology HT Two In one System. they Make Transformer with built in rolling contact type AVR suitable for Indoor / Outdoor installation, Copper wound HT Automatic Voltage Regulator is a revolutionary landmark in the industry when it comes to voltage Regulation and stabilization. Every after the installation of standard distribution transformer the problem of low / high voltage on the LT side persists, resulting in improper operation of the electrical equipment, premature failure & production loss of a plant.

The Standard off-circuit tapping of transformers can correct limited voltage variation and cannot regulate the voltage while in 'On load' conditions. They have developed state of the art technology Two in One System with transformer have built in HT Automatic Voltage Regulator that operates on load, sleeplessly & gives stabilized voltage on the LT side. The equipment is basically a combination of HT AVR with a standard distribution transformer. The fluctuating voltage from Grid is initially controlled by the HT AVR and then fed to the transformer resulting in the constant L.T. Output within +/- 1% accuracy and the biggest advantage being its robust design, Lesser Losses & MORE Efficiency make the distribution transformer to utilize upto 100% capacity.

Ultra Isolation Transformers :

Ultra/Super Isolation Transformers effective for Isolating sensitive equipment’s from Line Voltage transients, spikes & D.C. leakage etc. They are specially designed for sensitive critical equipment’s like computers & peripherals, medical instrumentation, digital communication telemetry systems, CNC Machines etc. and stopping such disturbances generated by the noisy equipment load from being injected into the power line.

Multiple shielding techniques employed reduce the interwinding capacitance to below 0.005 Pico farad and increases D.C. Isolation to over 1000 Megaohms. Technically any transformers that have no direct current path between its primary & secondary windings provides Isolation. Other commonly used transformers even if they have separate primary & secondary winding are intended to convert the input voltage to a more useful level & do very little to attenuate the passage of noise or transients from primary to secondary. Even though both are separately wound transformers, they are substantially different with respect to construction, specification & performance characteristics. In shielded transformer, Four Low impedance path exists for noises to pass to secondary and vice versa.

- The High Value of Coupling Capacitance.
- The Maximum Linkage of magnetic Field.
- The Leakage Current.
- Static transfer of Electric Noises.

The lightening arrestor boast with strength ranging from 0.5kv to 33KV in Distribution class Gapless Arrestors ( 5KA ), and 3KV to 420KV Gapless Station Class Arresters (10KA) comprising long duration discharge. These arrestors come with accessories like Disconnectors, Insulating base, Surge Monitor and support structures. Our range of Arresters are successfully type tested as per their specific application categories. Our surge arresters are available both in Porcelain and Polymeric/ Silicone rubber.

Joints :Heat Shrinkable - Transition joint up to 36 kv, straight joints up to 36 kv, straight joints up to 36 kv - for xlpe/epr insulating cable, transition joint up to 15 kv and straight joint 1.1kv

Cold shrink straight through joints upto 36 kv for xple cable :-

Resin Cast Systems - For 33 kv/22 kv h/hsl type pilc cable, for 11 kv pilc cable, for 1.1 kv pvc/pilc/xlpe cable, for submersible pump cable, for 3 kv airport lighting cable, for pvc/pilc/control cable, and for pressurized/non-pressurized telecommunication cable

Tapex tapit 'tt' system kits- For screened xlpe cable, for 11kv (ue) screened xlpe cable , for 11 kv (e) and 6.6 kv (ue) screened cable, for 6.6 kv (e) screened/3.3 kv (e/ue) unscreened xlpe cable & 6.6 kv (e)/3.3 kv (ue) pvc cable , for xlpe-pilc cable

Terminations : Heat Shrinkable - Terminations up to 36 kv, terminations up to 36 kv - for 3 core xlpe/epr insulated cable, terminations up to 36 kv - for single core xlpe/epr insulated, terminations up to 15 kv, terminations up to 15 kv - for 3 core xlpe/epr insulated cable, terminations up to 15 kv - for single core xlpe/epr insulated and termination for low tension pvc/xlpe/pilc cable

Cold shrink- Cold shrink indoor terminations up to 36 kv for xlpe cable and cold shrink outdoor terminations up to 36 kv for xlpe cable

Resin cast system kits - For 33 kv h/hsl type pilc cable, for 22 kv h/hsl type pilc cable, for 11 kv pilc cable (outdoor), for 11 kv pilc cable (indoor), for 11 kv pvc/pilc/xlpe cable and for 11 kv grade pvc/pilc/xlpe cable

Pre-moulded cable termination for xlpe/epr cable up to 33 kv tested & conforming to vde-0278/is: 13573& other national / international standard

Push-on type terminations have been indigenously designed to suit the environmental requirements of hot, arid, humid & tropical countries, wherein extremes of temperature, humidity, salinity etc. are encountered continuously.

GEM supplies Swaged Poles as per IS 2713. These poles are checked for drop test, deflection test and permanent set test before welding. Poles are Hot Dip Galvanised for surface protection. The poles are ground planted as per IS design or can be flange mounted to be provided over the road top on foundation bolts