General Instruments Consortium Gauges Bourdon India Private Limited

Two valve manifold is designed in a single block with female screwed inlet and outlet ports combining isolation valve and calibration / vent valve. Generally used on static pressure transmitters, switches and gauges.

Two valve manifold is designed in o single block with female screwed inlet and Outlet port combining isolation valve and calibration / vent valve. Generally used on static pressure transmitters, switches or gouges.

Tho valve manifold is designed in o single blot with female screwed inlet and outlet port combining isolation valve and vent / calibration valve , Generally used on static pressure transmitters, switches or gouges.

Two valve manifold is designed in o single block with female screwed inlet and outlet pod combining isolotion valve and vent / calibration valve . Generally used on stotic pressure transmitters, switches or gauges.

Designed os a new series of process insirument manifold for particular transmitter models. The coplonar manifold when ossembled lo transmitter has the advantage of compact size with ease for operation in minimum space, thereby eliminating several components in intcgraling the manifold to Ihc transmitter. The coplonor manifold has two isolating valves, one equalizer valve and two vent ports duly plugged. The manifold dimensions illustrated are for standard 54 mm or 2 1/8 inch instrument centres but available lor other centres. The direct mounting facility lo the base of the differentia! pressure transmitter results in less leakage points and more accurate measurements.

Designed to direct mounting on to standard directional pressure transmitters. This manifold block incorporates three valves. two main process isolation valves and one equalising valve

This design is suitable where the straight valve may foul with the instrument and provide case of operation.

Dimensions shown above ore for the standard 54 mm or 2 _^1/8 inch instrument connection Centre distance found in majority of instruments. The manifold is also available for instruments with other centre distances for instrument connections (as 55 mm, 56 mm and 57 mm) but dimensions shown will vary. Please consult factory for these dimensions.

Designed for direct mounting on to standard differential pressure transmitters. This manifold block incorporates three valves, two main process isolation valves and one equalising valve.

Dimensions shown above are for the standard 54 mm or 2 1/8 inch instrument connection Centre distance found in majority of instruments. The manifold is also available for instruments with other centre distances for instrument connections (as 55 mm, 56 mm and 57 mm) but dimensions shown will vary. Please consult us for these dimensions.

Designed for direct or remote mounting of differential pressure transmitters. For remote mounting two oval / kidney flanges are used for connecting process pipe lo manifold block. The manifold block incorporate two main valves for process isolation and one valve for equalizing.

Dimensions shown above ore for the standard 54 mm or 2 I /8 inch instrument connection Centre distance found in majority of instruments. The manifold is also available for instruments with other centre distances for instrument connections (as 55 mm, 56 mm and 57 mm) but dimensions shown will vary.

Designed for applications to facilitate remote mounting of differential pressure instruments. Dimensions shown above are for the standard 54 mm or 2 1/8 inch instrument connection. Centre distance found in majority of instruments. The manifold is also available for instruments with other centre distances for instrument connections (as 55 mm, 56 mm and 57 mm) but dimensions shown will vary. Please consult us for these dimensions. Useful or installations in remote fields eliminating conventional method of piping.

Five Valve Manifold Model G5 VMC 1 is designed as a new series of process instrument manifold for particular transmitter models. The coplanar manifold when assembled lo transmitter has the advantage of compact size with ease for operation in minimum space, thereby eliminating several components in integrating the manifold to the transmitter. The coplanar manifold hos two isolating valves, one equalizer valve and two vent valves and two bottom test ports duly plugged. The manifold dimensions illustrated are for standard 54 mm or 2 1/8 inch instrument centres but available for other centres. The direct mounting facility to the base on the differential pressure transmitter results in lesser leakage points and more accurate measurements.

Five Valve Manifold Model G5 VMC 2 is designed is a new series of process instrument manifold for particular transmitter models. The coplanar manifold when assembled to transmitter has the advantage of compact size with ease for operation in minimum space, thereby eliminating several components in integrating the manifold to the transmitter. The coplanar manifold has two isolating valves, one equalizer valve and two vent valves and two bottom test ports duly plugged. The manifold dimensions illustrated arc for standard 54 mm or 2 1/8 inch instrument centres but available for other centres. The direct mounting facility to the base of the differential pressure transmitter results in lesser leakage points and more accurate measurements

Five Valve Manifold Model G5 VMPF 2 is designed for direct mounting on differential pressure instruments. The manifold incorporates two process isolation valves, one equalizer valve and two drain/vent valves with separate connections. The process connection is through threaded connections for tube or pipe assembly. The valves ore suitably angled to prevent fouling with the instrument. Dimensions shown are for the standard 5*1 mm or 2 1/8 inch instrument connection centres but also available for other centres on request.

Five Valve Manifold Model "T" type Model G5 VMPF 1 is designed for direct mounting on differential pressure instruments. The manifold incorporates 'we process isolation valves. one equalizer valve and two drain/vent valves in a compact block. The process connection is threaded for connections by tube or pipe fittings. Dimensions shown are for the standard 54 mm or 2 1/8 inch centres for instrument and process connections but ore available for other centres on request. Thread details shown are for standard popular sizes and available to suit other thread standards.

Five Volvo Manifold Model G5 VMC 1 is designed as a new series of process instrument manifold for particular transmitter models. The coplanar manifold when assembled lo transmitter has the advantage of compact size with ease for operation in minimum space, thereby eliminating several components in integrating the manifold to the transmitter. The coplanar manifold hos two isolating valves, one equalizer valve and two vent valves and two bottom test ports duly plugged. The manifold dimensions illustrated are for standard 54 mm or 2 1/8 inch instrument centres but available for other centres. The direct mounting facility to the base on the differential pressure transmitter results in lesser leakage points and more accurate measurements.

Five Valve Manifold G5 VMPP-1 incorporate two process isolation valves, one equalizer valve and two drain/vent valves with separate connections in a compact manifold block. The Model G5 VMPP-1 i is designed for remote mounting away from the differential pressure instrument and joined by tube or pipe impulse lines. They have threaded connections of which the most popular are detailed below but also available 'o suit other sizes and standards.

Dimensions shown above ore for the standard 54 mm or 2 1/8 inch instrument connection. Centre distance found in majority of instruments. The manifold is also available for instruments with other centre distances for instrument connections (as 55 mm, 56 mm and 57 mm) but dimensions shown will vary. Please consult us for these dimensions.

Five Valve Manifold G5 VMPP- 2 incorporate two process isolation valves, two equalizer valve and one drain/vent valve with a common drain connection in a compact manifold block. The Model G5 VMPP 2 is designed for remote mounting away from the differential pressure instrument and joined by tube or pipe impulse lines. They have threaded connections of which the most popular are detailed below but also available to suit other sizes and Standards.

Dimensions shown above are for the standard 54 mm or 2 1/8 inch instrument connection Centre distance found in majority of instruments. The manifold is also available for instruments with other centre distances for instrument connections (as 55 mm, 56 mm and 57 mm) but dimensions shown will vary. Please consult us for these dimensions.

The adjustable pressure gauge dampener draw a unique taper PIN / ORIFICE design for high range of dampening. The dampening can be adjusted to suit the fluid and the pulsation.

Designed for use in application for throttling purpose and straight shut of liquids, gas or vapour service. These needle valves are available with a variety end connections and stem packing.

Designed for use with Gauges, switches or Pressure Transmitter. These Gauge Valve incorporates Two-Valve with single outlet that combines isolation, calibration and venting.

A compact needle valve especially designed or direct use with tubes Through built-in double ferrule compression fittings. Ideal for stainless steel, copper monel tubes.

A compact needle type valve or isolation of lines, sampling, throttling & similar applications. The valve has screwed ends to be used with pipes & lubes.

Multi port gauge valve is designed lot giving the user flexibility in positioning of gauges or pressure switches. These valve can be supplied with vent valve and blanking plug separately.

Designed for use in applications for throttling purpose and straight shut off of liquids, gas or vapour service. These needle valves are available with a variety of end connections and stem packing.

Designed for use in applications for throttling purpose and straight shut off of liquids, gas or vapour service. These needle valves are available with a variety of end connections and stem packing.

Needle Valve with down steam vent for usage with Static Pressure Gauge and instrument installation for isolation and venting.