 |
|
We fabricate outstanding quality of industrial equipment which are widely used in several industrial purposes. Our range includes:
|
 
| Proportional RegulatorWe make qualitative proportional regulator which is used for the step less control of the output. The proportional regulator supplied by us is rugged in their configuration and operates in a swiftly. Relying on the exerted pressure, servo cylinders are actuated, which controls the position of either the butterfly valve or the fuel injection pump of the diesel engine. The above function is carried with the help of proportional regulator; moreover the characteristics of the regulator can be adjusted by using various internal springs. Some of its technical specifications are: - Setting Pressure: 2 to 11 Kgf/C2
- Port Size: ¼” BSP/BSPT/NPT
- Temperature Range: -600C to 250C
Material of Construction - Housing, Spring Housing - Aluminum Alloy
- Diaphragm - Silicon with fabric reinforced rubber
- Spring - Spring Steel
- Other parts - Brass, Stainless Steel, Plated Carbon Steel
|
 
Pneumatic CylinderWe fabricate outstanding quality of servo cylinders which are widely used in several industrial purposes. Servo Cylinder controls the step less arrangement of the throttle valve (Butterfly or Fuel Injection Pumps). With the help of Teflon rings and very low friction between spindle guidance, the motion is a juddar free motion. This cylinder is rear escalated and the spindle travels up to 40 mm. Technical specifications: - Max. Working Pressure: 15Kgf/cm2
- Pressure required at Initial Stroke: 1.5 Kgf/Cm2
- Servo pressure: up to 5 Kg/Cm2
- Spindle stroke: 30, 35, 40 mm
- Working Temperature: -200C to 2050C
- Pilot port: 1/8” BSP/BSPT/NPT
- Servo Pressure: 7 Kgf/cm2
Material of Construction of servo cylinders is as follows: - Housing cover, Piston - Aluminum
- Rod actuator - Stainless Steel
- Guide bush - Steel (Corrosive resistant)
- Spring - Spring Steel (Corrosive resistant)
- Bush Bearing - Bronze
- Seal Material - Silicon, Teflon Polymer
| |
| Phosphor Bronze BushWe manufacture a durable range of phosphor bronze bush and washer to assure comfort at every level. The components and accessories that we develop are made with precession dimension.
we avail these components & accessories in different dimensions in terms of width and length as per the detailing given from the client’s side.
|
Non Return Valve  We offer our clients with the finest quality of Bulker NRV which are study in their configuration and thereby work smoothly. It is used in the Cement Bulker to control the cement from the receiver to the tank. Technical Data of the Bulker NRV that we make is given below: - Max. Working pressure: 20 Kgf/cm2
- Type: Normally Open.
- Operating Temperature Range: -200 C to 205 0 C
- Port Size: 2 1/2”
Material of construction availed by us are as follows:
- Valve Housing, Cover - Gunmetal 85-5-5-5
- Guide Bush - Brass
- Piston - PTFE
- Rod Actuator, Spring- S.S
| |
| Oil Level GaugeWith perfect knowledge our entire team works efficiently to deliver technically accurate Oil level gauges and Oil level Plug. We fabricate these gauges & plugs effectively to meet the critical demands of industrial functions. These gauges & plugs are used in testing the level of Small tanks, Sumps and Reservoirs. Listed below are the construction details & the working method of these valves: - The gauge is an easy to fit and verifies the height in any angle.
- The gauge is confined by a polycarbonate plastic glass guard tube over the sight tube.
- In between the glass & plastic tube a marked Maximum & Minimum color scale is positioned for accurate reading
- The end plug is attached with the vessel connections & is sealed to the sight tube by a sole ring gland system to assure effortless installation and hassle free operation
- The gland system will allow for adjustment of gauge 2mm in the fitting centers
- The oil level plug had a circular thick toughened glass with internal reflector
Technical Data: - Max. Working Pressure: 20Kgf/cm2
- Max. Temperature: -200C to 2050C
- Thread Size: 1”, 1 ½”, 2” BSP/BSPT/NPT
Material of construction - Sight Tube - Annealed Heat Resistant Glass
- Guard Tube - Polycarbonate Plastic
- Gland Assembly - Viton
- End Nut - Brass
Its availability and application: - Varied array of plug sizes are available
- This plug is suitable for high pressure and temperature
- Oil plug is frequently used in the Screw Compressor Oil Tank, Pressurized Hydraulic Tanks & Vessels
- For better results we request our clients to give their desired measures
|
|
 |
|
 |
|
© Genuine Machining Systems. All Rights Reserved (Terms of Use)