We manufacture safety valves from high grade raw material which has the ability of rust resistance. Our manufactured safety valve assures complete safety in its functioning of thwarting a gratuitous rise in pressure in the vessel, to which it is fixed. Safety valves find its usage in the Compressed Air Industry and other services involving gases and vapors.
 
Some of its technical specifications are as follows:

• Setting pressure Range: 5-30 Kgf/cm2
• Full Operating Pressure: Set Pressure 10%
• Resetting Pressure: Set Pressure-10%
• Temperature Range: -200C to 2050C
• Thread Size: ¾”, 1”, 1 ¼”, 1 ½” BSP/BSPT/NPT

Our manufactured safety valves are available in the following modes:

• Spring
  
• Stem valve - Stainless Valve
• Seal - Viton

Our specially designed pilot operated valves are efficiently used in several industries. Its main functioning is to utilize the inlet gas pressure to keep the valve closed. The inlet gas pressure is then routed through the pilot on to the top of the piston. The pilot operated valve manufactured by us has high flow, two positioned-spring return and direction control valve. The Valves are used as an on-off control valve, unloading valve in the Pneumatic System.
 
Following are the traits of the pilot operated valves:

• Strong
• Dependable
• Rapid response
• Built in spare parts

 
Technical Data of the pilot operated valve is laid down:

• Maximum Working pressure: 20 Kgf/Cm2
• Type: Normally Open, Normally Closed, 3 way
• Temperature range: -200C to 100 0 C/ -20 0 C to 2050 C (viton)
• Pilot Air Supply: Equal to/ not less than-5 kgf/cm2
• Port Size: ¾”, 1”, 1 ½”, 2” BSP/BSP/NPT
• Pilot Port: ¼” BSP/BSP/NPT
• Normal bore size: 25, 25, 38 and 50

It is available in the following materials:

• Valve Hosuing, Cover, Piston - Aluminum
• Poppet, Guide, Seat Poppet - Brass
• Seal – Nitrile/ Viton
• Spring, Rod Actuator - Stainless Steel

Our manufactured quick exhaust valve has diverse functions & has an operating system which works internally. The quick exhaust valve manufactured by us works in the following order:

• A Compressor which is shut down
• A receiver is vented to ensure that the compressor is not started under load.
• Vending valves blow down the receiver automatically if the pressure between the compressor outlet and NRV crosses below a certain level
• Whilst the compressor is rising under load, the venting valve remains closed

Following are the salient features of quick exhaust valve manufactured by us:

• High cycling speed
• Sturdy configuration
• Possess strength to withstand high pressure

Technical Data of this particular valve is listed below:

• Port Sizes: 3/8”, ½”, ¾”, 1” B.S.P./B.S.P.T/N.P.T

 
Material of construction:

• Body: Aluminum
• Seals: Nitrile Rubber

Application Areas:

• Conventional Quick exhaust application
• Persistent pressure application
• Check valve application
• Double Pressure application

 

Our developed minimum pressure valves are engineered with perfection to operate smoothly in regulation of flowing of gases & liquids. Minimum Pressure Valve is devised for its usage in Oil-injected Screw Compressors & Vane Compressors. It guarantees the necessary oil pressure for cooling and rotary-lubricating of the compressors is sustained. The minimum pressure valve is a spring loaded type and built-in non-return valve. We offer minimum pressure valve which supplies maximum life to the air pressure.
 
Technical Specifications:

• Max. Working pressure: 12 kg/cm2
• Operating temperature Range: -200C to 205C
• Opening Pressure: (Setting Pressure): 30/50/71/100 PSI
• Port Size: 1”, 1 ½”, 2”, 2 ½” BSP/BSP/NTP

We offer a premium range of non-return valve which are widely demanded for their high performance, meticulous construction and leak free configuration. These valves are frequently used in handling gases/ liquids under pressure/ vacuum. Non-return valve has a minimal opening pressure and minimal differential for closing even at high commissioning pressure. The unit locks efficiently in reverse directions at pressure differential as low as 0.1 Kg/Cm2. The units are equally capable in operation while conducting gases or fluid under pressure or vacuum. This valve is a self-aligning unit, therefore can be elevated/ fitted in any position. However the horizontal position is mostly preferred for its beneficiary positioning.
 
Technical Specifications are as follows:

• Normal Operating pressure: 0 ¿ 50 kgf/Cm2
• Normal Operating Temperature: 0 ¿ 1000 C (Nitrile)
• Max. Temperature: 0 ¿ 2500 (Viton)
• Port sizes: ¼”, ½”, ¾”, 1”, 1 ½”

We offer our clients with the finest quality of Bulker NRV which are study in their configuration and thereby work smoothly. It is used in the Cement Bulker to control the cement from the receiver to the tank.

Technical Data of the Bulker NRV that we make is given below:

• Max. Working pressure: 20 Kgf/cm2
• Type: Normally Open.
• Operating Temperature Range: -200 C to 205 0 C
• Port Size: 2 1/2”

Material of construction availed by us are as follows:

• Valve Housing, Cover - Gunmetal 85-5-5-5
• Guide Bush - Brass
• Piston - PTFE
• Rod Actuator, Spring- S.S

Our manufactured electro magnetic valve and fuel solenoid valve is configured from high grade raw material which ensures its sturdiness. These valves find their extensive usage in automobile. These valves constructed by us functions in the following ways:
 

• Fuel solenoid valve consists of stationary magnet fixed in the brass core tube
• Moving magnet and coil housing
• When the coil is energized, the fuel solenoid valve around the stationary magnet pulls the moving magnet towards the stationary magnet.

 
Listed below are the details related to this valve:

• Max. Operating pressure: 10kgf/sqcm
• Type: normally closed
• Port size: ¼” bsp/ bspt/ nptf/ metric 12
• Voltage: 24/12 v dc

We fabricate outstanding quality of servo cylinders which are widely used in several industrial purposes. Servo Cylinder controls the step less arrangement of the throttle valve (Butterfly or Fuel Injection Pumps). With the help of Teflon rings and very low friction between spindle guidance, the motion is a juddar free motion. This cylinder is rear escalated and the spindle travels up to 40 mm.
 
Technical specifications:

• Max. Working Pressure: 15Kgf/cm2
• Pressure required at Initial Stroke: 1.5 Kgf/Cm2
• Servo pressure: up to 5 Kg/Cm2
• Spindle stroke: 30, 35, 40 mm
• Working Temperature: -200C to 2050C
• Pilot port: 1/8” BSP/BSPT/NPT
• Servo Pressure: 7 Kgf/cm2

 
Material of Construction of servo cylinders is as follows:

• Housing cover, Piston - Aluminum
• Rod actuator - Stainless Steel
• Guide bush - Steel (Corrosive resistant)
• Spring - Spring Steel (Corrosive resistant)
• Bush Bearing - Bronze
• Seal Material - Silicon, Teflon Polymer

 

We make qualitative proportional regulator which is used for the step less control of the output. The proportional regulator supplied by us is rugged in their configuration and operates in a swiftly. Relying on the exerted pressure, servo cylinders are actuated, which controls the position of either the butterfly valve or the fuel injection pump of the diesel engine. The above function is carried with the help of proportional regulator; moreover the characteristics of the regulator can be adjusted by using various internal springs.
 
Some of its technical specifications are:

• Setting Pressure: 2 to 11 Kgf/C2
• Port Size: ¼” BSP/BSPT/NPT
• Temperature Range: -600C to 250C

Material of Construction

• Housing, Spring Housing - Aluminum Alloy
• Diaphragm - Silicon with fabric reinforced rubber
• Spring - Spring Steel
• Other parts - Brass, Stainless Steel, Plated Carbon Steel

With perfect knowledge our entire team works efficiently to deliver technically accurate Oil level gauges and Oil level Plug. We fabricate these gauges & plugs effectively to meet the critical demands of industrial functions. These gauges & plugs are used in testing the level of Small tanks, Sumps and Reservoirs. Listed below are the construction details & the working method of these valves:
 

• The gauge is an easy to fit and verifies the height in any angle.
• The gauge is confined by a polycarbonate plastic glass guard tube over the sight tube.
• In between the glass & plastic tube a marked Maximum & Minimum color scale is positioned for accurate reading
• The end plug is attached with the vessel connections & is sealed to the sight tube by a sole ring gland system to assure effortless installation and hassle free operation
• The gland system will allow for adjustment of gauge 2mm in the fitting centers
• The oil level plug had a circular thick toughened glass with internal reflector

Technical Data:

• Max. Working Pressure: 20Kgf/cm2
• Max. Temperature: -200C to 2050C
• Thread Size: 1”, 1 ½”, 2” BSP/BSPT/NPT

Material of construction

• Sight Tube - Annealed Heat Resistant Glass
• Guard Tube - Polycarbonate Plastic
• Gland Assembly - Viton
• End Nut - Brass

Its availability and application:

• Varied array of plug sizes are available
• This plug is suitable for high pressure and temperature
• Oil plug is frequently used in the Screw Compressor Oil Tank, Pressurized Hydraulic Tanks & Vessels
• For better results we request our clients to give their desired measures

 

We are specialist in Non Standard Air Cylinders, Pneumatic Valves. Our manufacturers make use of quality raw material which makes these valves durable and highly efficient. Further, our entire range adheres to international standard due to which they are used across various industries.

We manufacture a durable range of  Phosphor Bronze Bush and Washer to assure comfort at every level. The components and accessories that we develop are made with precession dimension.
We avail these components & accessories in different dimensions in terms of width and length as per the detailing given from the client’s side.