We have with us high quality vermiculites, which are demanded by the construction industry owing to durability and moisture resistant properties. This is also used in mines for building of emergency fireplaces. In order to protect the structure from heat stresses, vermiculite concrete is highly suitable as it is light, insulating and fire resistant and has high degree sound absorption.

We provide our clients with best quality products and services. The special grading exfoliated vermiculite offered by us is used as insulation materials in building industries. This allow architects, engineers and interior designers in making versatile design, which are known for their high performance at competitive cost. These special grading exfoliated vermiculite are exclusively used for making roof, wall heat insulation as well as light weight filling.

• High thermal insulation
• Specific Heat: 0.2
• It is fire proof and soundproof material.
• Form uncompressed lightweight slab.
• It is under I.S. Code 10555.
• Easy and fast application.
• There are no any affect of heat and moisture.
• Slop can be maintain or applied in dome shape.
• It is natural non-toxic, ecologically friendly and life long material.
• Colour -Light to dark brown.
• Shape -Flaky granules.
• Incombustibility: Can be used upto 1100 C.
• Melting Point: 1300 C.
• Sintering temperature: 1260 C.

We provide our clients with the best roof insulation services, which are known for their superb performance. The Eco friendly roof insulation technique offered by us contains no fibers or toxic gases. It causes no effect on those suffering from respiratory problems and is absolutely safe.

Geosis Vermiculite is special grading exfoliated vermiculite used as Insulation materials in building industries it allow architects engineers and contractors versality in design, high performance at reasonable cost. Surface should be clean and free from dust and loose material, light cement slurry can be apply on the surface for better adhesion. The mixed material is applied on the roof or wall without compression as recommend thickness. It can be lay on the top of RCC slab, Steel deck, ACC sheet and domes. The laid material is allowed to dry and set for 3-4 days. Since it is cement based material water curing is required. It forms an uncompressed light weight slab after drying. Any terracing material can be done on the top of insulation slab.

FEATURES & PROPERTIES

• High thermal insulation
• It is fire proof and sound proof material
• It is under I.S. Code 10555
• Form uncompressed light weight slab.
• Easy and fast application.

We provide our clients with Light Weight Concrete which is popularly known as foamed concrete or cellular concrete. This conventional concrete with comprehensive range of densities, choice of aggregates and mix designs. They are widely used in the manufacturing of single-skin lightweight concrete wall-panels, employing tilt-up construction. The lightweight concrete is ideal concrete for the manufacture of light commercial structures and factories as well as residential housing.

Construction Adhesives is an exceptionally high strength, fast setting, high quality waterproof adhesive developed to bond all types of ceramic tiles, fully vitrified tiles, as well as natural stone, marble, granite and mosaic tiles onto brickwork, cement render and concrete walls and floors. Suitable for both internal, external & tile on tile application. It is a rigid set, high quality cement based adhesive suitable for most types of ceramic wall and floor tiles. It is suitable for thin and thick bed applications onto rigid substrates including concrete, cement renders, brickwork & blockwork.

Concrete Admixture is chloride free, normal water reducing admixture and It contains sugar reduced Lignosulphonates. It disperses the fine particles in the concrete, enabling water content in the concrete to perform more effectively and improving the consistency of the concrete. This produces higher levels of workability for the same water content. They meet the requirements of ASTM C494 (Type A) and BS 5075 for normal water-reducing admixtures. Also confirms to IS 9103-1999. Concrete Admixture is a chloride free, high range water-reducing admixture. It contains Sulphonated Napthalene polymers, and is specially formulated to impart rheopiastic qualities to concrete. They are specially formulated for high degree of workability and slump retention and high quality of concrete of reduced permeability. BOSCOPLAST SP300 (A) meets the requirements of ASTM C494 (Type A and G) and BS 5075 for high range water-reducing and retarding admixtures. Also confirms to IS9103-1999.

• 250 kg drum or in bulk Dosage: 200 to 500 ml / 50 kg cement.
• 250 kg drum or in bulk Dosage: 150 to 500 ml/50 kg cement.
• 250 kg drum or in bulk Dosage: 300 to 750 ml/50 kg cement.
• 200 liter drums or in bulk Dosage: 300 to 750 ml/50 kg cement.

Seal 'N' Flex 1 is a low modulus, one component, Class Apolyurethane sealant. When cured it will form a tough, flexible seal capable of cyclic expansion and compression movement of 50% (+ 25%) of the original joint width. Seal 'N! flex 1 is virtually unaffected by normal weathering conditions such as rain, sunlight, snow, sleet, ultra-violet radiation, ozone, atmospheric contamination and pollution.

Its excellent weather-ability enables it to retain its original properties after years of exposure. Seal 'N' Flex FC is a high performance fast cure one component polyurethane sealant. When cured it will form a tough, flexible seal and bond capable of cyclic expansion and compression movement. Joints formed with this sealant can be expected to extend and compress a total of 50% (+ 25%) of original joint dimensions to ASTM C719.

Seal 'N' Flex FC is virtually unaffected by normal weathering conditions such as rain, sunlight, snow, sleet, ultra-violet radiation, ozone, atmospheric contamination and pollution. Its excellent weather-ability enables it to retain its original properties after years of exposure. Its physical properties remain relatively unchanged over a wide temperature range (-40°C to + 70°C).

Water Proofing Repairs is a smooth aqueous liquid waterproofing dispersion for addition into cement renders and screed, which effectively blocks the passage of water and increase mortar resistance against water and chemicals. Complies to IS: 2645-2003.

Following are the repair products offered by us:

Bostik EP Bond

Bostik EP Bond is a epoxy bonding agent for new to old concrete. Suitable for steel and structural members and repairs of structural concrete. High bond strength and excellent adhesion. Packing: Available in Packing of 1 Kg and 5 Kg. Coverage: 2sqm per kg depends on porosity of surface

Patchfix Concrete

Patchfix Concrete is a rapid setting, high early strength, shrinkage compensated repair concrete for patching roadways, pavements and floors. A special blend of cement and aggregates supplied in a ready to use form. The addition of water and mixing produces a high strength, heavy duty trowellable repair concrete that minimizes shutdown time and allows the repair back in service in 2-3 hours. Packing: It is available in packing of 20 kg Fresh wet density is 22000kg/m³ Color: Grey Application Thickness: 10mm to 180mm

Bostik ERM

Bostik ERM is a three component system based on specially formulated epoxy resins and hardeners, especially for repairs and rehabilitation of concrete structures. This product can also be used for sealing of cracks, bonding old concrete to new concrete and for foundation grouting. ERM Base: 5,10 & 20 kg ERM Hardener: 2.5,5 & 10 kg ERM Filler: 40 kg Coverage: Primer 0.2kg/m7coat, Mortar 2 kg/m7/mm

Ultralevel ESL1000 is a 1 mm thick self leveling, seamless, epoxy floor system. Ideal for Industrial floor, clean room laboratories and electronic assembly area, hospital, switch gear plant room, pharma industries, food processing industries & showrooms. Bostik ESM is a solvent less epoxy screed mortar system based on epoxy resin technology. Ideally suited forfloors and walls subjected to mechanical loading and chemical exposure. Its uses is recommended for all factories like fertilizers, paper, textiles etc, in food industries* like beverages, fats, sugar and confectionaries, in water treatment and sewage treatment plants etc .Primer E2-1 & 5 kg Ultralevel ESL 1000-10 kg Coverage: Primer E2-5-6nf/kg Ultralevel ESL 1000- 0.6m7kg @ 1mm thickness ESM Base-5,10 & 20 kg ESM Hardener-3,6 & 12 kg ESM Filler-40 kg Coverage: Primer E1-0.25 kg / nf' ESM 2 kg/m2/mm.

We offer a range of high quality sealants, which find wide application in construction and infrastructure industry. These readily extrude over a durable and flexible seal and are suitable for used in dynamic applications such as expansion, perimeter & control joints, sealing of windows, curtain walls, precast concrete panels & stress cracks. Made using best grade raw material, these are unaffected by normal weathering conditions such as rain, sunlight, ultra-violet radiation, atmospheric contamination and pollution. Standard compliant, these are available at most affordable prices.