The HSS cutting tools, known as HSS punch, dieset and ball cages we offer are manufactured with the use of optimum quality material like HSS- M2, M35 and M42. Our range of HSS cutting tools comprises of segmental roll, thread roll, flat roll, die nut and split die. These are used on press machines of various capacities to manufacture sheet metal press parts of automobile components such as fenders, mud guards, gaskets, press tools and others. These are offered under the brand name "Shavin".

Our diesets are available in various sizes & assembled with the help of assembly machines to maintain & retain requisite accuracy for prolonged time. We provide two or four pillars with fool proofing arrangement to avoid damages of dies & punches.

Punch is the weakest and vulnerable part of press tool that requires high quality. These are made of high quality HSS material and are properly heat treated. These are available in various sizes ranging from Ø1.2 mm to Ø17.5 with 80 mm length. We also offer these in special size as per clients’ specifications i.e. Ø8.7 x 100 long, Ø15.1 x 85 long and others. Following are the attributes of using our high speed steel piercing punches:

• High wear resistance resulting in increased tool life
• Reduced maintenance cost and time of the press tool
• Substantial reduction in tool down time and loss of production because of high performance & life
• These are customized cutting tools designed to suit specific operations.
  

These HSS cutting tools are used on CNC, conventional or special purpose machines of various capacities for machining of metal

These gear cutting tools we manufacture are used to generate gear tooth profile in any material. The entire range of gear tools is available in different modules, pressure angle and class. Our gear cutting tools are fabricated using qualitative material such as HSS- M2, M35, M42 and solid carbide.

We offer the following range:

• Gear Hob
• Gear Shaper

We manufacture and supply a wide range of plastic cutting tools that are available in word and paper.

Wood Tools:

The wood cutting tools we offer are used to generate creative design in wood as shown in the figure provided by the clients. These tools are used on router machines available in various capacities for machining of wood.

We offer these plastic cutting tools in:

• Carbide tipped type (brazed)
• The cutter body is made of suitable alloy steel duly heat treated and the cutting edges are of solid carbide brazed on the steel body

Paper Tools:

Our range of paper cutting tools is used to cut paper and paper products such as corrugated sheet and others. These paper cutting tools are called knives and slitters as shown in the figure. We offer these cutters in the following material:

• HcHcr alloy steel
• D2 steel

The threading tools we design are used to generate internal thread (taps) & external thread (die) in any material. These threading tools are offered in various sizes ranging from 01 mm to 100 mm with different tolerance like H6, G6, AX, AZ. We use premium grade raw material such as HSS- M2, M35, M42 and solid carbide to fabricate our range.

Our range comprises:

• Left hand tap
• Right hand tap
• Multi start thread tap
• Screw Thread Insert Tap
• Fine pitch
• Course pitch
• Tandem tap- two different sizes with same pitch
• Metric tap
• Inch tap- BSP, BSF
• NPSM tap
• NPT tap
• Acme thread form tap
• Roll tap ( fluteless/ roll form tap)
• Bent shank tap, coupler tap, nib tap particularly used by fastener (nut) manufacturing industries

The form tools we offer are customized cutting tools developed to generate specific profile on the component using a single tool. The required profile on the component is used on the tool cutting edges. These are applicable in CNC, conventional or special purpose machines of different capacities for machining of metal. Our range is applicable where a component is required to be machined in a single setting to maintain relative accuracy parameters.

These foam tools are offered in:

• HSS grade - M2, M35 and M42.
• Carbide tipped type (brazed).
• Solid carbide

We offer a wide range of cutting tools, known as CNC tools that are designed for CNC turning centers, VMC, Turnmill centers, HMC of various capacities for machining of metal. The entire gamut is manufactured as per ISO norms. The steel used for the fabrication are of high grade and are duly heat treated tempered and nitrided. CNC tools are particularly used where high production rates are desired. Higher degree of consistency and accuracy in components are desired. We offer these cutters in:

• Indexable insert CNC turning holders
• Indexable insert face mill cutters
• Indexable insert boring holders
• Indexable insert threading holders

These are customized cutting tools designed to suit specific operations. These tools are used on CNC, conventional or special purpose machines of various capacities for machining of metal.

These tools are particularly used where –

• High production rates at low cost per components are desired.
• A production capacity is required to be increased due to limitation of single machine.
• A component is required to be machined in a single setting.

We offer these cutters in :-

• Indexable insert combination type.
  
• Indexable insert modular type.
  
• Solid carbide.
  

These products are designed & manufactured to suit standard ISO inserts.

These tools are used on CNC, conventional or special purpose horizontal or vertical boring machine, of various capacities for machining of holes from Ø8 mm upto 300 mm of perfect size ( bearing sizes) with close tolerance.

We offer these cutters in :-

• Indexable insert integral holder.
  
• Indexable insert modular holder.
  

All these tools are dynamically balanced & designed to operate at optimum speed. We offer these tools with adjustable cartridges with least count of 0.002 mm, 0.005 mm, 0.01 mm. These products are designed & manufactured to suit standard ISO inserts.

The holders are ISO tapers, BT-40 tapers, BT-50 tapers.

The side and face cutters we manufacture have gained tremendous appreciation in the market for their host of exclusive features. These are developed using high speed steel of M2, M35, M42 and T42 grades. The side and face cutters can also be customized to generate required form as per clients’ description. We use ISO standard carbide indexale inserts. Our range is properly head treated as per the steel selected. The range is extensively used for machining of deep slots, T slots, special profile and others.

We manufacture a wide range of industrial drills that are widely used to make hole in any material. These industrial drills are available in various sizes ranging from Ø0.05 mm to Ø60 mm. Our entire range is fabricated using qualitative material such as HSS- M2, M35, M42 and solid carbide that are procured from trusted vendors. We offer various types of drills that consist of the following:

• Stub drills
• Jobber drills
• Extra long drills
• Taper shank drills
• Step drills
• Core drills
• Subland drills
• Centre drills
• Burnishing drills
• Spade drills
• Form drills

These are widely used on CNC, conventional or special purpose milling machines of different capacities to machine metal during manufacturing of dies & moulds, automobile components, etc.

Our gamut of slitting cutters is used on CNC, conventional or special purpose machines of different capacities to machine metal, wood, plastic or any other material. These are developed in different thickness. Slitting cutters are used for machining of thin slots ranging from 0.2mm to 6 mm. We offer these cutters in the following range:

• HSS (High Speed Steel) standard/special grade- M2, M35, M42, T42
• Carbide tipped (brazed)
• Solid carbide

The different tooth profiles and number of teeth are made available to suit different machining conditions. Tooth profiles that can be generated are as follows:

• A
• AW
• B
• BW
• C

We fabricate a wide range of diamond dressers that are envisaged from the point wheel dressing concept, which is an extension to the areas with a rigorous control demand on quality & economy. The entire assortment has gained appreciation for the following attributes:

• Economical in comparison with single-point dressers
• Higher form retention capability compared to single point dressers
• Minimum in-process service attention compared to any other dressers due to their self-wearing property
• They are ideally suited for optimum dressing condition and in turn for optimum grinding conditions
• Greater flexibility in selection from a wide range of varieties of dressers to suit different grinding wheel specifications and grinding conditions