India Mark-II Handpump: It is divided into four main assemblies:

• Head Assembly: Pump Head Assembly (above ground mechanism) consists of Head with Inspection cover, Third plate, Handle, Water chamber and Stand.
• Cylinder Assembly: Cast Iron Body painted outside and lined from inside with seamless Brass liner of 63.5mm I.D., Gun-metal valve components and Nitrile rubber components. Discharge capacity is 15 ltrs @ 40 strokes per min.
• Connecting Rod: 12 mm dia mild steel electrogalvanized, in three metre lengths with hexagonal coupling at both the ends.
• Riser Pipe (Drop Pipe): 32 mm N.B., G.I. medium pipe in three metres length with a socket at one end.
• Installation: Simple Installation. When installed properly it gives very long uninterrupted service. For step by step installation procedure and other details, please refer to our Installation and Maintenance Manual.

Salient Features

• Suitable for borewell installation with static water level upto 45 mtrs.
• The entire above ground components are fabricated out of steel sections, hence they are strong and sturdy.
• Ease of operation.
• Pre-greased, sealed Ball Bearings add to the ease of operation and elimination of greasing during use.
• The Spout design ensures collection of water.
• Pedestal Design ensures the bore hole is sealed to prevent water source contamination.
• Cylinder with highly polished brass liner ensures long life of Nitrile Rubber Pump Bucket.
• The Rubber parts in the cylinder are nontoxic and hence they cause no health hazards.
• All internal parts of the cylinder are made of Gun-metal to ensure long life.
• These pumps can be easily adapted for Shallow-Well, Wind Mill and Motorised operations with minor modifications.
• It works on the positive displacement principle, hence the displacement remains constant.

Our range of mud pump are used in the following applications like:

• Water-well drilling
• Diamond core driling
• Mines dewatering
• Oil field application
• Industrial application
• General water services

Cluster Hammer (HIPPO) is manufactured to international specifications, from only the best quality Alloy Steel, machined to high precision and supreme standards. The product is heat- treated in the most modern, fully process controlled, inhouse facility. The Tungstan carbide Buttons which are used are used are obtained from leading and reputed indigenous and foreign manufactures. Cluster Hammer is a quality product, that conform to international standards and strict quality control methods. Some of the features are:

• KLR products are constantly improved with adaptation of the most recent manufacturing technologies and the product features always ensure.


• Longer Product Life


• Higher and consistent penetration rate


• The capacity and capability to perform hitch-free at higher pressure range.


• Reduced number of parts, and compact structure for lower rate of wear&tear.


• Avoidance of Back Hammering, Hammer blocking etc.


• Minimum maintenance costs

We are a leading manufacturer of tricone rock roller bits which are available in the following sizes:

• TC Rock Roller Bits: 7 7/8 to 14 1/2
• Milled Tooth Rock Roller Bits: 7 7/8 to 14 1/2

Block Making Machine

	Single Vibrator	Double Vibrator	Triple Vibrator
Power	5 HP	6.5 HP	8 HP
Production Capacity	2500 to 3500/8 hrs	2500 to 3500/8 hrs	2500 to 3500/8 hrs
Vibrator Motor	1.5 HP, 440 V	3 HP, 440 V	4.5 HP, 440 V
Hydraulic Pump Motor	3 HP, 440 V	3 HP, 440 V	3 HP, 440 V
Travel Motor	0.5 HP, 440 V	0.5 HP, 440 V	0.5 HP, 440 V
Machine Weight	900 kg	950 kg	1050 kg
Space Occupied by the Machine	1750 x 1275 x1750 mm	1750 x 1275 x 1750 mm	1750 x 1275 x 1750 mm
No of Blocks per Shift (8 hrs)	1300 to 1500 Blocks	1500 to 1750 Blocks	1750 to 2000 Blocks

100 x 200 x 400 mm (16" x 8" x 4") - 8 Blocks / Stroke

150 x 200 x 400 mm (16" x 8" x 6") - 5 Blocks / Stroke

200 x 200 x 400 mm (16" x 8" x 8") - 4 Blocks / Stroke

Hollow Mould and Solid Mould prices will vary.

Model	Free Air Delivery		Nominal Working Pressure	Engine	Overall Dimension, mm
	M / min	Cfm	Psi g		Length	Width	Height

Trolley Mounted Air Compressor

DL 03 007	49.6	175	100	HA 494, KOEL	3485	1580	1590
DL 04 012	8.50	300	100	ALU 6.65, AL	3410	1720	1880
DL 04 012	8.50	300	100	4 BT. Cummins	3160	1720	1932
DL 04 012	8.50	300	100	W04D Hino AL	3060	1720	1690
DH 04 012	8.50	300	150	4 BT, Cummins	3160	1720	1932
DL 04 014	9.91	350	100	4 BT, Cummins	3160	1720	1932
DL 05 016	11.33	400	100	W04CT, AL	3060	1720	1690
D11 05 016C	11.33	400	150	6 BTA, Cummins	4375	1620	2400
DH 05 018	12.74	450	150	6 BTA, Cummins	4375	1620	2400
DL 05 024	17.00	600	100	6 BTA, Cummins	4375	1620	2400
DV 06 026	18.40	650	200	6 CTA, Cummins	5680	1780	2600
DM 06 030C	21.24	750	125	6 CTA, Cummins	5680	1780	2600

For more details, click on Download.

Terrameter (Water Logging System)

Water Level indicator (100m – 1000m depth) with counter mechanism is a very handy device to quickly check the level of water in open wells and in borewells.

A sensor attached to the end of a cable, wound on a winch is lowered in to the well. over a calibrated wheel attached to the counter mechanism. The moment the sensor touches the water surface, a panel meter on the winch which is on the ground shows full deflection with buzzer sound. The depth to the water level from the ground can be read off in metric scale on the counter