Chemical Intermediates Manufacturers,Chemical Intermediates Suppliers,Chemical Intermediates Exporters,India

Chemical Intermediates

We formulate wide assortment of intermediates using qualitative raw material in the production process. Our technological advanced manufacturing unit and research facility enables us to keep and maintain accurate composition in our intermediate range. Our wide array encompass of the following:

Cypermethric Acid Choride

We prepare and offer intermediates of Cypermethric Acid Chloride (D.V.Acid Chloride) which is an intermediate and is used for the synthesis of Cypermethrin. Cypermethric Acid Chloride is also used for manufacturing of Permethrin, Betacypermethrin and some other chemicals.

Technical details:

Chemical Name: 3-(2, 2-dichlorovinyl)-2, 2-dimethyl cyclopropane-1-carboxylic acid chloride.
CAS Registry No: [ 52314-67-7 ]
UN No: 1760
IMDG: Class 8 (Corrosive, Liquid, N.O.S.) IMDG 2004 Edition Vol.2, Page No. 84

Physical Properties:

Appearance: A clear pale yellow liquid free from extraneous impurities.
Boiling Point: 78-80OC at 1.5 mm Hg and 116-117OC at 7.5 mm Hg
Density: 1.23 g/ml at 300C
Freezing Point: Does not freeze up to 50C
Solubility: Miscible in n-hexane, benzene, toluene, chloroform and carbon tetrachloride in all proportions.
Reactivity: Reacts violently with water, alkali metals and their hydroxides. Reacts rapidly with alcohols resulting corresponding esters and evolves hydrogen chloride with water and alcohols.
Stability: Stable under normal storage conditions

Specifications:

Acid chloride content: "By GLC (area normalization method, as methyl ester)”: 99% (w/w) minimum; By volumetry : 98% (w/w) minimum
Acid content: 0.8% (w/w) maximum
Thionyl Chloride content: 0.2% (w/w) maximum
Other related substances: 0.5% (w/w) maximum (by GLC, after esterification) Cis-Trans ratio: 55: 45 to 53: 47
Grades: DV Acid Chloride with different Cis-Trans ratios i.e. High Cis (75% to 80%) and Low Cis (25 to 40 %) is also available.
Packing: 50 kg and 250 kg UN approved polylined MS drums

Add to Enquiry Basket

CIS-Cypermethric Acid

We make use of superior quality chemicals in the formulation of CIS-Cypermethric Acid. Our intermediates are widely used in various chemical syntheses for the production of chemicals. Some of the technical and physical specifications of our intermediate are as follows:

Chemical Name: Cis-3-(2, 2-dichlorovinyl)-2, 2-dimethyl cyclopropane-1, carboxylic acid.
CAS Registry No: [59042-49-8]
UN No: 3261
IMDG: Class 8 (Corrosive, Solid, Acidic, Organic, N.O.S.) IMDG 2004 Edition Vol.2, Page No. 167

Specifications:

Appearance: Powder, white to off-white in color
D.V. Acid content (Assay by volumetry): 99% (w/w) minimum
Melting Point: 83-85OC
Moisture content by Karl Fischer method: 0.5% (w/w) maximum
Isomer distribution by GLC : Cis-isomer-99% minimum, Trans-isomer 1% maximum
Related substances by GLC are 3-chloro acetylenyl (2, 0.5% (w/w) maximum 2-dimethyl cyclopropane)-1-carboxylic acid, and (ii) 3-(2, 2, 2-trichloro ethyl) 2, : 0.5% (w/w) maximum 2-dimethyl cyclopropane-1-carboxylic acid.
Packing: 250kg UN approved G.I. Drums/Fiber Board Drums with LDPE Liner

Add to Enquiry Basket

Metaphenoxy Benzyl Alcohol

Metaphenoxy Benzyl Alcohol is a pesticide intermediate used for formulation of permethrin and other synthetic pyrethroid insecticides. We make use of qualitative raw material in the formulation of Metaphenoxy Benzyl Alcohol to ensure effectiveness and accurate composition. Some of the technical and other specifications of our Metaphenoxy Benzyl Alcohol include the following:

Chemical Name: m-phenoxy benzyl alcohol
CAS Registry No : [13826-35-2]
Appearance: Clear liquid with colorless to pale yellowish tinge
Boiling point: 135-140oC/1 mm, 1860C/10 mm, 205.50C/27 mm
Density at 20oC: 1.13 - 1.14
Freezing point: Not freezing up to -400C
Solubility: Freely soluble in Toluene, Methanol, etc.
Stability: Stable under normal conditions
Reactivity: No particular reaction with acids, alkalies, etc.

Specification

M-phenoxy benzyl alcohol content: 98% (w/w) min.
Acidity: Not more than 0.2%
Moisture content: 0.5% (max.)
Packing: 225 kg UN approved HDPE lined MS drums/ HMHDPE drums.

Add to Enquiry Basket

Metaphenoxy Benzaldehyde

Owing to the vast industrial experience we are able to formulate and offer pesticide intermediates. We make use of optimum quality chemicals as raw material in the production process of Metaphenoxy Benzaldehyde. This is used in the production of synthetic pyrethroid insecticides. Some of the salient features of our Metaphenoxy Benzaldehyde are as follows:

Chemical Name: m-phenoxy benzaldehyde
CAS Registry No : [67-36-7]
Appearance: Colorless to light yellow clear liquid free from extraneous impurities.
Boiling point: 140°C at 0.1mm Hg
Density at 20°C (by Hydrometer): 1.149 to 1.154
Freezing point: 13°C
Solubility: Soluble in most organic solvents, sparingly soluble in water.
Stability: Stable under normal conditions.
Reactivity: Reactive in alkaline medium. It should be protected from air as it is susceptible to oxidation.

Specifications:

m-phenoxy benzaldehyde: 99% minimum content (by mass GLC)
Acidity as Meta Phenoxy: 0.5% maximum Benzoic Acid (by mass)
Moisture content: 0.2% maximum
Packing: 225 kg UN approved lacquered MS drums/HMHDPE drums.

Add to Enquiry Basket

Pyrazole

Using qualitative raw material and with the help of cutting edge technology we are able to formulate and offer pyrazole. Pyrazole, a pesticide intermediate, is used to manufacture Metazachlor. This is also used as a ligand to prepare organometallic compounds as well as a building block in organic synthesis in general.

Chemical Name: Pyrazole
CAS Registry No: [288-13-1]
UN No: 3077
IMDG: Class 9 (Environmentally Hazardous Substance, Solid, N.O.S) IMDG 2004 Edition Vol.2, Page No. 152

Physical Properties:

Appearance: Off-white crystals or Flakes. Hygroscopic in nature
Melting Point: 67-700C
Boiling Point: 186-188OC
Stability: Stable under normal temperature and pressure.
Assay (percent by mass): 96% (w/w) minimum (by ISTD-GLC)
Packing: 40kg Fiber Board Drums with built in PP liner

Add to Enquiry Basket

Sodium Salt of Trichloropyridinol (NaTCPOL)

We make use of optimum quality raw material in the production of our Sodium Salt of Trichloropyridinol which is available as monohydrate. This is used as an intermediate in the preparation of chlorpyrifos ethyl / methyl, Triclopyr etc. Some of the physical and chemical properties of the intermediate are as follows: Chemical Name: Sodium 3,5,6-Trichloro-2-pyridinate.

Molecular Weight: 220.5

CAS Registry No: [ 37439-34-2]

UN No: 3077

IMDG: Class 9 (Environmentally Hazardous Substance, Solid, N.O.S.) IMDG 2004 Edition Vol.2, Page No. 152

Physical properties:

Appearance: Buff to brown colored amorphous pallet / powder
NaTCPOL content, by HPLC : 82% (w/w) minimum
Moisture content: 15% (w/w) maximum (by Karl Fischer method)
Inorganic Salts as NaCl: 5% (w/w) maximum
Free Alkalinity as NaOH: 0.2% (w/w) maximum
Packing: 40kg HDPE woven sacks with LDPE liner, 125kg UN approved lacquered Drums with LDPE liner

Add to Enquiry Basket

Trans-Cypermethric Acid

Capitalizing on our cutting edge technology in the form of quality checking laboratory, research facility and manufacturing unit we are able to formulate and offer superior quality Trans-Cypermethric Acid which is used as an intermediate in the syntheses of pesticides and other chemicals. Some of the physical and chemical properties are as follows:

Chemical Name: Trans 3-(2, 2 dichlorovinyl)-2, 2-dimethyl cyclopropane-1, carboxylic acid
CAS Registry No: [59042-50-8]
UN No: 3261
IMDG: Class 8 (Corrosive, Solid, Acidic, Organic, N.O.S.) IMDG 2004 Edition Vol.2,
Page No. 167

Specifications

Appearance: Powder, white to off-white in color.
D.V. Acid content: 98% (w/w) minimum (Assay by volumetry)
Melting Point: 920C minimum
Moisture content by Karl Fischer Method: 0.5% (w/w) maximum
Isomer distribution by GLC: Cis isomer-5% maximum. Trans-isomer 95% minimum
Related substances by GLC are: 3-chloro acetylenyl -2, 2- : 1.0% (w/w) maximum dimethyl cyclopropane-1- carboxylic acid, and 3-(2, 2, 2-trichloro ethyl) 2, 1.0% (w/w) maximum 2-dimethyl cyclopropane-1- carboxylic acid
Packing: 250kg UN approved G.I. Drums/Fiber Board Drums with LDPE Liner

Add to Enquiry Basket