The extracted meal emerging from the D.T. is quite hot and at around 100 deg. C. It is received in the meal conveyor. This is ventilated conveyor in which the meal is cooled down to a convenient temperature as it is transported to the meal conditioning section. The cooling may also be effected by  draft of air through cyclone ond blower system.

Thus the cooled meal is received in the Humidifier.In the Humidification unit the desired quantity of water is metered in and finely sprayed on the material under process which is vigorously agitated and mixed. The emerging material generally contain moisture of over 10%.The Humidifier is generally located at 2 mtr. level from ground in order to enable direct packing of the material from it through a bagging device.

The prepared material from Preparatory section is recieved in the Feed Hopper through Rotary Valve. The material in the hopper and the rotary valve togelher constitute on effective vapour seal while the latter also serves to regulate the feed. The hopper is further provided with the special switches for high level and low level indications. The latter If energised stops the band conveyor of extractor while the high level indication, transmits an audio visual signal to Preparatory Section for preparatory operator to take corrective measures.

The GLAMPTECH Extractor is long horizontal vessel, Rectangular in cross section in m.s. Construction. An articulated band conveyor inside the Extractor recieves the material from Feed Hopper ond transports it at a pre determined speed from the feed end to discharge end.

The band conveyor moves over rails suitably located inside the Extractor and rides on specially constructed sprockets ot either end. The speed of the band conveyor is easily adjustable within desired limits. An adjustable damper enables the regulation of height of bed of material on band conveyor.

A series of sprayers locoted above ihe band conveyor enables perfect spray of the solvent on fhe moving bed. Special spray breakers facilitates uniform distribution of solvent over the entire width of moving bed. Each spraying section is followed by a draining section.

Fresh sloven! is admitted info the Extractor near the discharge end of the moving bed of material and the full miscella is recovered from the initial stage; thus ensuring the perfect counter current flow of material and the solvent.It is not merely a simple countercurrent flow. The miscella circulates in a closed circuit in each of the successive section by overflowing from each hopper of fhe Extractor after increasing gradually its oil content in each hopper. so in each section there is on equilibrium between the oil extracted from the seed in corresponding section and the difference in oil content of solvent overflowing the preceding hopper together with the solvent overflowing the following section.

The cleaning of the band conveyors is accomplished by high pressure jet spray of fresh solvent onto the return of band conveyor at discharge end which ensures perfect cleaning of mesh and eliminates completely the possibilities of choking of mesh and channeling.

CONTINUOUS NEUTRALISING PLANTS  are fully automated and are capable of handling various qualities of vegetable crude oils yielding high grade finished products.  Various operations like Pegummitig, Gum Conditioning, Neutralising and Water washing can be carried out in this Plant.The Hants are designed for utmost versatility, for trouble free operation and for coping up with raw materials obtained from different sources.

The raw material change-over requires very short downtime due to small volumes of oils contained in the plant and to the ease in changing the process parameters.Furthermore, the use of best centrifugal separators ensures high yields and consistently best quality of Neutral oil.

The entire plant is designed for continuous operation and requires minimum attention.The equipments can be controlled from a Central control panel with large easy to read flow diagram of the process and the entire plant can be bandied by a single operator. Furthermore the sturdiness and quality of all the parts employed permits simple operation and reduced maintenance.

The design of a GLAMPTECH CONTIGUOUS BLEACHING PLANT is based on the most advanced and easy to operate technology, which enables the reduction in consumption of Bleaching chemicals, floor area and labour. It also yeilds a final oil colour fully meeting the market standards.

GLAMPTECH CONTINUOUS BIFACHNG PLANT is of versatile design and can be used for Bleaching of conventional refined oils as well as pre-treated oils to be refined by the physical refining process.The Bleaching operation of the oil is earned out completely out of contact with air. The slurry preparation and bleaching sre under vacuum where as the filtration is carried out in pressure leaf filters. This eliminates any possibility of oxidation of oils during the Bleaching process and ensures production of high quality bleached oil.

GLAV1PTECH CONTINUOUS BLEACHING , incorporates, simple, yet efficient dosing system for dosing of Bleaching Chemicals. This system enables accurate dosing rates as per the process requirements and final colour demands. This system is based on dry dosing of Bleaching Chemicals and avoids completely, handling of slurry which causes operational as well as mechanical problems.

The Bleaching Plant is further equipped with pressure leaf filters complete with stainless steel woven wire mesh filter leaves.The filters are further provided with pneumatically operated Butterfly valves. The Incorporation of pressure leaf filters ensures lower oil losses in the spent earth.The plant is provided with comprehensive instrumentation and control system for efficient control of all significant process parameter ensuring high quality oil consistently.

GLAMPTECH DEWAXIMG PLAMTS are specially designed to suit the present market requirements of quality refined oils.

The Dewaxing Flants are incorporated with intrinsically designed crystallizes and maturators, which are specially made for very slow cooling with continuous agitation for better heat transfer.

In the process the oil to be Dewaxed is passed through Heat Exchanger wherein the temperauture of oil is brought down to ambienttemperature and fed into the crystallizers for Nuoleation and crystal formation under low temperature. The maturators are utilized for propagation and crystal growth of waxes and finally the crystallized mass is filtered in plate and frametype filter presses. The Dewaxed oil such obtain ensures clearity of oil even at lower temperatures.

GLAMPTECH CONTIOUS DEODORISER is constructed totally out of stainless steel and comprises of a number of suprimposed trays.

This design offers following advantages:

Continuous operation and/or quick feed stock changeover.with no substantial lossof operating time and with no risk of cross containination.

• Equal temperature and vacuum throughout the deodorising column hence ensuring high efficiency of stripping.
  
• Low energy requirements.
  
• Heat recovery as high as S5% is achieved by use of special system of heat regeneration.
  
• No pollution problems as the condenser water is discharged practically fat-free;thanks to separate vapour scrubbing
  arrangement.
  
• No splash oil hence lower Neutral oil losses and nil processing
  cost.
  
• All operations are centralized In control switch board with
  flow chart.
  

We provide exclusive services for Hydrogenation that includes autoclave for edible oils of any capacity ranging up to 20 Tons charge along with a heat exchanger which can produce up to5 batches per day. These are achieved with the help of unique designs of agitation system in Autoclave. To ensure selective hydrogenation and excellent quality product, high degree of automization to control flow, temperature and pressure in Autoclave are used. Featured with zero steam consumption these are achieved with the most efficient design of oil to oil heat exchanger.
 

The Company has set up flexible, continuous and multi-feedstock based plant (with a capacity of 300 TPD), which will lie at the core of a fully integrated biodiesel Company. The plant is going to be based on best-in-class technology from leading global technology providers.

The acid oil plants we design and develop are appreciated for their resistant to corrosion and decay from concentrated chemicals features. Our gamut of acid storage tanks have the storing capacity up to 65000 liters which can further be customized as per clients' requirements. The acid storage tanks are capable of reserving any type of acid.
 

Preparation of oil bearing material prior to Its Extraction is often under estimated by many processors. To achieve the best results in solvent Extraction, the way in which the row material is prepared is almost as important os Extraction Equipments Itself.

The feed stock should have a particle size small'enough to enable the solvent to reach right up to the core, but at the same time not so small as to constitute 'fines'; should have fairly uniform particle size in order to 'pack well' in the Extractor and form a homogenous bed and should possess good percolation characteristics. Too big pieces in the feed results in high residual oil content in meal as the solvent may not be able to penetrate to the core. And too small particles or fines will lead to poor percolation and channeling effect, thus resulting in poor performance of the plant.

Fully conscious of the importance of proper preparation, GLAMPTECH have, after a long experience, developed a complete range of preparatory equipment suited for each type of raw material. EXPELLER CAKES.Expeller Cakes are adequately handled by Cake Breaker (702) and Roller Mill (703). In the former, iwo pairs of spiked rolls made in special alloy, running on heavy bearings, and with driving mechanism, break the large pieces of cakes in the smaller pieces. These pieces are further broken down into smaller pieces in the Roller Mill (703), in which special corrugated rolls are utilized. The resulting product is eminently suited for Extraction.

SOYABEANS :
Soyobean processing requires cracking, cooking and flaking operations. GLAMPTECH Cooker is a multistaged vertical vessel with steam heated bottom plates ond specially designed live steam injection arrangement so arranged thai the entire surface of material is uniformly covered by steam. The intrinsically designed agitator assembly moves the material and makes it pass from stage to stage. Automatic level adjustment and regulation devices are provided.

The cracked and cooked soyabean thus obtained are transported to next operation of flaking. Flaker Machine is used for flaking various prepared oilseeds thus breaking down the cellular structures and exposing larger area for efficient oil extraction. The machine comprises of one pair of chilled cast iron, dynamically ballanced rolls mounted on heavy C.I Housings; supported by suitable bearings. The gap between the rolls is adiusted as per the requirements with the help of hydraulic powerpock fitted with pressure switch to generate pre determined pressing power. GLAMPTECH Hydraulic Flaker produces quality flakes of approximate 0.25 mm to 0.3 mm thickness, which is mo:,! suitable for efficient extraction process.

RICEBRAN :

Ricebran is powdery material which does not allow percolation of solvent easily. GLAMPTECH pelletizing machine is specially designed for producing porous pellets with good percolation characteristics.

GLAMPTECH offers you total Expander System with sqeezomatic cage as well as Autorun facility/Drier, Cooler/Flake Conditioner and necessary conveying System. Machine and internal components are highly rugged in construction due to quality workmanship and optimised metallurgy for components. Drier-Cooler of Horizontal type with M.S. fabricated body and S-S. perforated tray complete with hot air radiator / Blowers etc.

CAPACITY:  GLAMPTECH Expanders are available in various models suitable to your requirement from 100 to 500 Tons with pulley as well as gear box drive.
 
SYSTEM :We can offer you total system depending upon your existing layout which includes Elevator / Bulk flow conveyor / Feeder Conditioner / Drier cooler etc., and can undertake Erection & Commissioning of the system.

GLAMPTECH EXTRUDER EXPANDER SYSTEM IS THE RIGHT CHOICE FOR THE MODERNISATION OF VEGETABLE OIL INDUSTRY.

ADVANTAGES :

Increases the capacity of existing plants Reduces solvent & steam consumption Consistent results of low oil content in D.O.C. Lower retention of solvent in meal due to high porosity Can process high oil bearing materials without the use of expellers Eliminates fines in prepared meal

 
 

Our business activity also includes miscellaneous trading practices. These trading activities have gained hug popularity in the market that has helped in achieving a long list of satisfied clientele. Our transparent business dealing have made us one of the market leaders engaged in providing engineering and technical management service in the field of Continuous solvent extraction / vegetable oil refining and allied industries.