We offer to our clients Programmable Timers which have the various industrial usage. Our Range Starts from:

1. Programmable Multi-Range Double Display Timer

Specifications:

• Range: 999.9 SEC., 9999 SEC., 999.9 MIN., 9999 MIN. (Selectable by Programmer)
• Control Action: ON Delay/ OFF Delay. ( Selectable by Programmer
• Memory Status: With Memory/ Without Memory. (Selectable by Programmer)
• Start: Power ON Start/ External Start Pules on back terminal. (Selectable by Programmer)
• Reset: Power ON Reset/ Front Push Reset/ External Reset on back terminal
• Power Supply: 85V AC to 265V AC ±10%, 50 Hz.
• Output: Relay Output - 1C/O, 7Amp./ 1C/O, 7Amp
• Display & Setting: 7 Segment LED Display. & By merman keys provided on front
• Size & Mounting: 96x96x110/ 72x72x110/ 48x48x100mm. & Panel Mounted

Applications:

• Press Machine.
• Oven & Furnace.
• Sealing Machines
• Printing Machinery
• Plastic Processing Machinery
• Packaging Machinery
• Pharmaceutical Machinery

2. Programmable Multi-Range Thumb Wheel Timer

Specifications:

• Range: 999.9 SEC., 9999 SEC., 999.9 MIN., 9999 MIN. ( Selectable by front Slide Switch)
• Control Action: ON Delay/ OFF Delay. (Selectable by on PCB jumper setting)
• Memory Status: Without Memory.
• Start: Power ON Start/ External Start Pules on back terminal. (Selectable by on PCB jumper)
• Reset: Power ON Reset/ Front Reset key/ External Reset on back terminal.
• Power Supply: 85V AC to 265V AC ±10%, 50 Hz.
• Output: Relay Output - 2C/O, 7Amp.
• Display & Setting: 7 Segment LED Display. & By Thumb wheel switch.
• Size & Mounting: 96x96x110/ 72x72x110mm. & Panel Mounted

We are manufacturing and supplying a complete range of programmable  controller which is offered to our clients at reasonable prices. Owing to the quality standards, the gamut is high in demands in domestic and international marketplace.

1. Programmable Double Display Counter

Specifications:

• Range: 0 - 9999 Counts.
• Memory Status: With Memory/ Without Memory. (Selectable by Programmer)
• Reset: Power ON Reset/ Front Push Reset/ External Reset on back terminal
• Power Supply: 85V AC to 265V AC ±10%, 50 Hz
• Out Put: Relay Output - 1C/O, 7Amp./ 1C/O, 7Amp
• Display & Setting: 7 Segment LED Display
• Size & Mounting: 96x96x110/ 72x72x110/ 48x48x100mm. & Panel Mounted

2. Pre-settable Counter with Thumb-wheel Counter

Specifications:

• Range: 0 - 99, 0 - 999, 9999, 99999, 999999 Counts.
• Memory Status: With Memory/ Without Memory.
• Reset: Manual/ Auto Reset / Reset on Back terminal.
• Power Supply: 220V AC ±10%, 50 Hz.
• Output: Relay Output - 1C/O, 7Amp.
• Display & Setting: 7 Segment LED Display. & By Thumb-wheel Switch
• Size 7 Mounting: 96x96x110/ 72x72x110mm & Panel Mounted

Application

• Packaging Machinery
• Oven & Furnace
• Textile Machinery
• Plastic Machinery

We are catering a durable range of sensor which is demanded all across the globe. These are engineered with the help of engineers and technocrats and are at par with international standards which are:

• D.C. Inductive Proximity PNP-NO/NC/NPN-NO/NC (M-8 TO M-30)
• D.C. Capacitiv Proximity
• A.C. Proximity Sensor AC-NO, AC-NC. (M-12 TO M-18).
• Fork Sensor (12V, 24V DC)
• Photo cell sensor
• Defuse I.R. Sensor
• Temperature Sensor
• Float Sensor

We offer a wide range of Programmable Temperature controller that is fabricated using quality raw material and is available at optimum prices. With the assistance of our engineers and designers we are able to carve a niche for ourselves in catering these controller.

1. Digital Temperature Controller with Single Set point:

Specifications:

• Range & Type: 0 - 600oC (J Type), 0 - 1200oC (K Type), 0 - 400oC (PT-100 Type)
• Control Action: Time proportionating ON/OFF Control.
• Sensor Input: J Type, K Type, PT-100 Type. (Factory Setting)
• TCB: Thermocouple Break.
• Model: GTC-09, GTC-07
• Power Supply: 85V AC to 265V AC ±10%, 50 Hz
• Output: Relay Output - 1C/O, 7Amp
• Display & Setting: 7 Segment LED Display. & By POT Knob on front
• Size & Mounting: 96x96x110/ 72x72x110mm & Panel Mounted

2. Digital Temperature Controller With Two set point :

Specifications:

• Range & Type: 0 - 600oC (J Type), 0 - 1200oC (K Type), 0 - 400oC (PT-100 Type)
• Sensor Input: J Type, K Type, PT-100 Type. (Factory Setting)
• Model: DTC 400D
• Power Supply: 220V AC ±10%, 50 Hz
• Output: Relay Output - 1C/O, 7Amp., 1C/O, 7Amp
• Display & Setting: 7 Segment LED Display
• Size & Mounting: 96x96x140mm & Panel Mounted

3. Analog Temperature Controller :

Specifications

• Range & Type: 0 - 400oC (J Type), 0 - 1200oC (K Type) Factory Setting
• Sensor Input: J Type, K Type (Factory Setting)
• Model: Bite (96), Alfa (72)
• Power Supply: 220V AC ±10%, 50 Hz
• Output: Relay Output - 1C/O, 7Amp
• Setting: By POT Knob on front
• Size & Mounting: 96x96x110/ 72x72x110mm

4. Digital Temperature Indicator :

Application areas:

• Heat Treatment
• Oven & Furnace
• Textile Machinery
• Food Processing
• Packaging Machinery
• Environmental Chambers
• Laboratory Equipment
• Plastic Processing Machinery

We are offering our superior range of clutch-brake controller for our clients based globally. These are manufactured with the help of our designers and engineers using high technology and state-of-the-art facilities which is like..

• Process Controller GPC-04C
• Process Controller GPC-04
• Process Controller GPCC-03
• Process Controller GPDC-04
• Process Controller GPPC-04

Specifications:

• Input Power Supply 220V AC ±10%, 50Hz
• Input Signal PNP/NPN Proximity & Colour Mark Sensor.
• Panel Mounted M.S. Cabinet Powder coated.
  

Application areas:

• Induction Table
• Cut to Length Application
• Use in Plastic Bag Making Machine

We are offering a wide assortment of water pump controller to our clients based globally. These controllers are offered at optimum prices and stand high on quality parameters.

Specifications:

• PUMP OFF/ ON Pump OFF Indicator / Power Supply ON switch
• MAIN Power Supply Show Indicator
• POWER SUPPLY 220V AC ±10%, 50 Hz
• PUMP ON Pump ON Indicator
• MODE (1) Auto Mode. (2) Manual Mode
• SIZE & MOUNTING 140x160mm & Panel Mounted

Application Areas:

You start the pump, but often forget to switch it off, resulting in overflow wastage of both electricity and water, in addition to messing up of surroundings, and damaging walls and roof. Tripper switches off the pump automatically, when the tank is full. To provide automatic control to water pump. Starts the pump when level in the overhead(Destination) tank is low and switches it off when the tank is full. This is suitable where the source of water is unlimited. The controller switches on the pump as soon as water level reaches a certain depth and switches off the pump when the water level is low enough. There are sensors detecting high water level and the low water level.

We offer to our clients Cyclic Timers which have the various industrial usage. Our Range Starts from:

1. Cyclic Timer

Specification:

• Range: 999.9 SEC., 9999 SEC., 999.9 MIN., 9999 MIN. (Selectable by Programmer)
• Memory Status: With Memory/ Without Memory. (Selectable by Programmer)
• Reset: Power ON Reset/ Front Push Reset/ External Reset on back terminal
• Power Supply: 85V AC to 265V AC ±10%, 50 Hz
• Output: Relay Output - 1C/O, 7Amp./ 1C/O, 7Amp
• Display & Settings: 7 Segment LED Display
• Size & Mounting : 96x96x110/ 72x72x110/ 48x48x100mm & Panel Mounted

2. Time Totalizer

Specification:

• Display: 7 Segment LED Display
• Power Supply: 85V AC to 265V AC ±10%, 50 Hz
• Range: 99 SEC., 99 MIN., 99 HRS
• Memory Status: With Memory
• Time Start: Power ON Start, Push to Start
• Reset: Front Reset & Back Terminal
• Size & Mounting : 48x96x100mm.& Panel Mounted

3. Time Totalizer with pre-settable Output:

Specification:

• Range: 0-999999 Counts
• Memory Status: With Memory/Without Memory. (Selectable by Programmer)
• Reset: Power ON Reset/Front Push Reset/ External Reset on back terminal
• Power Supply: 85VAC to 265VAC ±10%, 50Hz
• Output: Relay Output-1C/O, 7Amp./ 1C/O, 7Amp
• Display & Settings: 7 Segment LED Display. & Setting by memran keys provided on front
• Size & Mounting: 48x96x110mm. & Panel Mounted

Application:

• Packaging Machinery
• Oven & Furnace
• Textile machinery
• Plastic Machinery

The gamut of RPM indicator is available as per the requirements of the clients. These indicators are fabricated using advanced technology and quality raw material. Wit the help of our engineers and designers, we are able to keep pace with the international trend of the market.

RPM Indicator cum Count Total

Specifications:

• Range: 5 to 500000 RPM Speed
• Sensor Input: Proximity Sensor PNP/NO
• Accuracy: 1 RPM
• Speed: Low Speed/High Speed (User Selectable)
• Model: RI-046, RI-072, RI-096
• Power Supply: 85V AC to 265V AC ±10%, 50 Hz
• Display: 7 Segment LED Display
• Size & Mounting: 48x96x110mm & Panel Mounted

Application:

• Machine Production Speed
• Stock RPM
• Any Moving Shaft RPM

The wide spectrum of Digital Panel Meter fabricated by us is of superior quality and is offered at optimum prices. These are precision engineered with the help of our experts and technocrats to maintain pace with the international trend of the market.

• Digital Volt Meter
• Digital Amp. Meter
• Digital RPM Indicator

Application areas:

• Oven & Furnace
• Heat Treatment.
• Laboratory Equipment
• Packaging Machinery
• Textile Machinery
• Plastic Processing Machinery

The diverse range of D.C. motor drive catered by us is of top-notch quality and is manufactured using quality raw material and advanced technology. These are specially fabricated to suit the variegated needs of the clients based globally which are..

• 1HP to 5HP D.C. Motor Drive
• PM D.C. Drive Open Motor Drive
• Programmable P.C. Motor Drive

Specifications:

• AVALIABLE 1 HP to 5 HP Single Phase
• INCH Moves Motor in Manual mode
• POWER SUPPLY 220V AC ±10%, 50 Hz
• OUTPUT As Required D.C. Motor
• SPEED SETTING By POT
• Ball Mounted

Application areas:

• Press Machines
• Oven & Furnace
• Textile Machinery
• Sealing Machines
• Packaging Machinery
• Printing Machinery
• Pharmaceutical Machinery
• Plastic Processing Machinery

We manufacture stepper & server systems with following specifications

• Based on Stepper System
• Based on servo System
• Clutch & Brake System

Application in :

• Plastic Bag Making Machine
• Print Registration
• Cut to length applications
• Engraving Machines
• Orientation for tube, Filling
• Rotary/Linear indexer
• Paper Cutting Machines
• X-Y Table
• Tilting Machines
• Special Purpose Machines
• Horizontal, form fill seal Packing Machine

Other products that we offer include:

• Heater failure indicator
• Power pack
• Digital/ analog photocell panel
• Vibrator controller
• Display panel
• Safety analyzer
  
• Sequential timer
• Fan winding controller
• C.t.winding controller
• Custom built control panels