• Provided feeder for straight components
• Thickness of the ink can be controlled
• All Kinds of Edge coloring is possible other than inner parts

Available Models :

    a. Vertical Colouring Machine
    b. Horizontal Colouring Machine.
    c. Double Sided Colouring Machine

* The cutter spindle is provided with variable speed to get
   different feed rate for different leather

* The bottom pressure roller (nylon roller) is mounted on
   pneumatic slide, which is controlled by a foot switch    
   to avoid unnecessary contact between pressure roller and
   knife while idle run

* Machine is provided with a foldable table in which full
   leather (before cutting) can be placed to insure straight
   cutting of leather

* Machine is provided with an attachment, which can measure outer diameter of the cutter.  So similar diameter cutters can be used at a time.

* Machine is constructed rigidly and it creates 6 ton load at  
    100 bar hydraulic pressure

* Suitable for cutting and creasing for different shaped 
   components

* The machine will be used for clicking application (without 
   heat) up to 150mm x 250mm size clicking die

* The machine is used for heavy embossing

* The machine will be used for end cutting and punching of 
   the belt

• Pneumatically operated frame fixing provided with mechanical stopper
• The machine will  be supplied with straight frame die
• For the other shapes the die will be supplied for extra cost .

 

• Used to warm the leather product before polishing for better skin finish
• Drying edge coloured leather components
• Chamber Size : 500 x 500 x 1800 and also the machine can be converted as three seperate chambers as 500x 500 x 600 by using seperator.
  
• Can be used for  drying belts, straps (bag handles) by removing all trays except the top hook tray.
• For small components, nine trays can be used at a time
• For finished bags the racks can be removed as per the gapping need
• For least quantity, the chamber size is minimized by using separator

Available Sizes :

a. 500 x 500 x 500-Manual Door Opening
b. 600 x 600 x 1800 -Automatic Door Opening
c. 500 x 250 x 1500 - Conveyor Type

• The machine is available with & without dust collector
• Two speeds are provided for buffing as well as polishing

Verical Polishing Machine :

Rigidly Constructed to avoid vibration.

 

• Rigidly Constructed to get consistency in the quality.
• The digital heat controller is provided to set various temp to perform quality impression.
• Cartridge type heaters are used for long life.
• Since the vertical movement is pneumatically controlled,the impression uniform even though the thickness of the leather differs
• The automatic Version consists of electronic timer to control the pressing time.
• The machine will reach the required temperature within 10 minutes

Available Models :

a.Chota embossing Machine.
b.Medium embossing Machine.
c.Pillar Embossing Machine.

 
 

• uniformity in application of glue layer.
• Provision to control thickness of glue during application.
• Provided with adjustable glue margin gauge .
• Glue tank is designed to minimize drying of glue

Available Models :
a.Edge Gluing Machine.
b.25mm Width Gluing Machine
c.50mm Width Gluing Machine
d.100mm Width Gluing Machine
e.150mm Width Gluing Machine

Faster & Parallel Hammering.

Available Models :

a.Hammering Machine - Table Top
b.Hammering Machine - Arm Type
  *The Structure of the machine is designed to  minimize   the    hammering noise.
 *The arm length - 300mm is provided to hammer big size bags.
c.Hammering Machine - Post Type
*The machine is specially designed to hammer bottom of the bag and also for regular hammering .

Straight Edge Folding Machine

• Folds St. Edges in perfect manner
• Provision made to adjust folding width
• Provision made for folding & parallel pressing for different thickness

Available Models :

a.Hand Folding - 5 inches
b.Hand Folding - 12 inches
c.Hand Folding - 18 inches
d.Hand Folding - 22 inches
e.Pneumatic Automatic Folding  - 18 inches

Creasing Machine

*Perfect Straight line creasing  is obtained due to non shrinking,hardened and ground material used for the knife.The knife is properly guided in guide ways provided.
*Catridge type heaters are used as heating element which gives longer life than others.
*The Creasing margin can be adjusted from 0.5mm to 10mm.
*.The heat controller is inbuilt within the machine to avoid electrical connection failure.

Available Models :
a.Creasing Machine - 10' - Hand Operated.
b.Creasing Machine - Pneumatic - Automatic

*Faster Operation.
*Riveting, eyeleting and button fixing can be possible by changing fitters.

Avaliable Models :

a. Motorised Table Top Riveting Machine.

b. Pneumatic Riveting Machine
- Available Models :
a. Post Type Riveting Machine
b. Arm Type Riveting Machine

Strap Folding Machine

*Uniform Folding width is maintained.
*9 metre length strap can be folded per minute
*Perfect pressing
*Various gauges are provided to obtain difference in width

Seem Opening Machine

*Uniform Opening and Pressing.
*Faster Operation.