Bengaluru, Karnataka
Home»Products»

Soil Testing Equipment

Being pioneers in the industry, we manufacturer and exporter a wide array of Soil Testing Equipment. This range comprises of California Bearing Ratio Test (Field Type), Standard Compaction Test, Compression Proving Ring, Cone Penetrometer and Consolidation Apparatus that are highly demanded by the clients.

We are also Testing Equipment Suppliers, Soil Testing Equipment Suppliers, Laboratory Testing Equipment Exporters, India.We also offer Soil Testing Equipment & Laboratory Testing Equipment.


Permeability Apparatus

Permeability Apparatus
Permeability Apparatus

Item Code: PR-01

We are manufacturer, exporter & supplier of Permeability Apparatus:

In soil machines Permeability is one of the important Engineering properties, as it governs rate of settlement of saturated compressible soil layer and rate of flow of equifer. Permeability is that property of soil which permits flow of water through its interconnecting voids. The instrument to measure permeability is called permeameter. The results are used for pumping ground water, for foundation sites excavations, design of dams etc. Tests can be performed on remoulded or undisturbed samples using constant head or falling head method.

Sampling Augers

Item Code: SA-01

We are the manufacturer,supplier and exporter of Sampling Augers:

Augers are used to collect disturbed soil samples at reasonable depths for laboratory tests. Augers are available in two type and each in different sizes. Blade type (post hole type) and Helical type (screw type). Each auger outfit consists one each of Auger head, one meter long rod, Tee piece and handle. Depths of excavating can be increased by using additional extension rods.

Dames And Moore Sampler

Dames And Moore Sampler
Dames And Moore Sampler

Item Code: DAMS-01

We are the manufacturer,supplier and exporter of Dames And Moore Sampler:

Highly useful for sampling soils. The sample collects into rings inside the sampler. These rings along with the specimen can be directly placed in a consolidometer cell assembly, thereby reducting the number of operations to extract the sample from a sampler, trimming to size and transferring into the ring etc. The possible disturbance in these operations is eliminated.

Salient Features

Specifications:

Consists of a split tube accommodating ten things brass rings 60 mm x 25.4 mm long. A shoe with hardened cutting edge is screwed at one end. A driving head with ball check valve is fitted at the other end. The flaps mounted inside the cutting shoe prevent the cohesion less soil falling down while lifting the sampler.

Spares: Body consisting of split pipe threaded at both the ends and shoe.

Head Assembly: Set of 10 rings 60 mm O.D. and 25.4 mm long.

California Bearing Ratio Test

California Bearing Ratio Test
California Bearing Ratio Test

We are manufacturer, exporter & supplier of California Bearing Ratio Test:

Our company is one of the well known and reputed names in industry engaged in offering a large gamut of California Bearing Ratio Apparatus. These are used in testing the expansion characteristics and relative bearing ratio under sub-base, surcharge weights of base and sub grade soils for pavement, roads and runways designs. Technologically advanced these items are available in many of the different specifications.

Specifications:

  • Diameter face: 50 mm
  • Penetration rate: 1.25 mm/min
  • Mould: 150 mm ID x 175 mm high

Standard Compaction Test

Standard Compaction Test
Standard Compaction Test


We are the manufacturer,supplier and exporter of Standard Compaction Test:

The apparatus consists one each of Compaction Mould Gun Metal, 100mm ID x 127.3mm height x 1000c.Volume, complete with collar and base plate. Rammer 2.6kg x 310mm controlled fall.

    Compression Proving Ring

    Compression Proving Ring
    Compression Proving Ring

    we are the manufacturer,supplier and exporter of compression proving ring:

    These proving rings are made out of special steel, carefully forged to give maximum strength & machined to give the highest sensitivities commensurate with high stability and to ensure long life and accuracy. All proving rings are integral type viz. the loading (outside) bosses are forged integral with the ring body. This ensures that there is no possibility of abutment shift and consequent loss of accuracy in reading that always exists in rings with bolted abutments. The dial gauge and anvil are mounted on U-brackets clamped to the ring body by Allen set screws. The dial gauge is fitted with a special back cover and threaded bush which does not permit any shift from the original diametric alignment, coaxial with the loading boss centers, that is set at the factory before calibration. For all compression proving rings and tension compression proving rings up to and including 5 kN capacity (a little over 500 kgf) the loading bosses have female threading, 1/2" B.S.F. (16 t.p.i.) The boss faces are ground and polished and are lane parallel to within 0.02mm.total D.T.I. run-out. Caps are provided for use when loading in compression. Repeatability is as stipulated in IS : 4169-1967. The rings are supplied complete with dial gauge and our own calibration chart, packed in polished wooden boxes.

    Compression Proving Ring From any capacity to

    • 250 kgf
    • 500 kgf
    • 1000 kgf
    • 3000 kgf
    • 5000 kgf
    • 2000 kgf
    • 10000 kgf
    • 20000 kgf
    • 25000 kgf
    • 50000 kgf
    • 100000 kgf
    • 200000 Kgf

        Cone Penetrometer

        We are manufacturer, exporter & supplier of Cone Penetrometer:

        It will consist of metallic cone with half angle of 15' -30 ±15' and 30.50mm coned length. It will be fixed at the end of a metallic rod with a disc at the top of the rod so as to have a total sliding weight of 148± 0.5 gms. The total rod shall pass through two guides. (to ensure vertical movement) fixed to a stand. Suitable provision will be made for clamping the vertical rod at any desired height above the surface of the paste in the trough. A brass trough 50 mm internal diameter and 50 mm depth will be provided as per IS specification resting on M.S.bars.

          Consolidation Apparatus

          Consolidation Apparatus
          Consolidation Apparatus

          We are the manufacturer,supplier and exporter nof Consolidation Apparatus:

          Being the leading names in the industry we are involved in offering a wide range of Consolidation Apparatus. These are used to test flexural strength of concrete beams. Our products are manufactured under the strict guidance of our professionals using high quality raw material and sophisticated technology to meet the clients needs. Moreover, we offer these at very economical prices.

           

          Features:

           

          • High reliability
          • Fine finishing
          • Durable nature

              Extractor Frame Universal (Hand Operated)

              Extractor Frame Universal (Hand Operated)
              Extractor Frame Universal (Hand Operated)

              Item Code: EFU-01

              we are the manufacturer,supplier nad exporter of Extractor Frame Universal (Hand Operated)

              The Extractor Universal frame has been designed to extract specimens from almost every type of sampling tube, mold in general use in soil engineering laboratory or in the field. This has the advantage that it can be mounted vertically or horizontally as desired. Three 1 1/2 inch diameter samples can be collected into three 1 1/2 inch diameter tubes from one 4 inch dia sample. This is a unique feature which ensures the economic use of the sample in an undisturbed state.

              Core Cutter

              We are manufacturer, exporter & supplier of Core Cutter:

              Specifications:

              • It consists one each of: cylindrical core cutter mode of steel, 127.3 mm
              • Steel dolly, 25 mm high
              • Long and 100 mm internal diameter

              Accessories:

              • Cylindrical core cutter 100 mm i.d. x 175 mm long
              • Dolly
              • Test form pad of 50.

              Dial Gauge

              We are the manufacturer,supplier and exporter of Dial Gauge:

              Dial indicators are instruments used to accurately measure small linear distances, and are frequently used in mechanical processes.

              Direct Shear Apparatus (Hand Operated)

              Direct Shear Apparatus (Hand Operated)
              Direct Shear Apparatus (Hand Operated)

              We are the manufacturer,supplier and exporter of Direct Shear Apparatus:

              Direct Shear Apparatus
              is available in three verities which include Hand Operated, Motorized with Single Speed and Motorized with 12 speeds. The Soil Direct Shear Apparatus made by us are highly appreciated for the kind of performance and durability that they extend. That’s why we are ranked top among the Direct Shears Apparatus Suppliers in India.

              Direct Shear (Motorized Single Speed)

              Direct Shear (Motorized Single Speed)
              Direct Shear (Motorized Single Speed)

              We are manufacturer,supplier and exporter of Direct Sheer Apparatus.these products are extensively used in various applications. Owing to their robust construction, excellent performance and superior quality, these products are highly demanded by the customers.

               

              It consists of:

               

              • Loading Unit with V-strips where the shear box housing rests
              • Loading yoke with direct and lever system in order to apply normal load to a capacity of 8 kg/cm2
              • Fixtures for proving ring, brackets for holding consolidation and strain dial gauges and manually operated lead screw for application of shear stress
              • Complicated counter balancing arrangement has been dispensed with and the unit is provided with pre calibrated load yoke
              • Shear box assembly for square specimen size 60 x 60 x 25mm
              • Two halves of shear box
              • 2 Plain gripper plates
              • 2 Perforated gripper plates
              • 2 Porous stones
              • Top loading pad


              Available Models:

               

              • Hand Operated
              • Motorized with single speed
              • Motorized with 12 speeds



              Other Information
              • Minimum Order Quantity: 5 Pieces

              California Bearing Ratio Test Field

              California Bearing Ratio Test Field
              California Bearing Ratio Test Field

              Item Code: CBR-01

              We are the manufacturer,supplier and exporter of California Bearing Ratio Test Field:

              Mechanical screw loading jack, 10,000 Kg. Capacity with U-bracket and swivel head. Penetration piston, 50mm dia threaded at the upper end. Extension rods set consisting of length 50cm, and 1 length 100cm., used as spacers between the proving ring and penetration piston. The lengths are machined from steel tubing.

              Connector set, has eight connectors for coupling the penetration piston and proving ring assembly either directly or through extension pieces.

              Dial gauge support of seamless pipe construction. It stands 30cm high and 45cm wide at the base. Provided with a quick release screw type clamp capable of sliding and locking anywhere along 2 meter length of the bridge. Supplied with annular metal weight 5Kg. 250mm dia with 53mm dia central hole, slotted metal weight 5 Kg, 215mm to 250mm dia with 53mm dia slot, 3 Nos, Slotted metal weight, 10Kg, 215mm to 250mm dia with 53mm dia slot. 2Nos.

              Optional Accessories:

              A) Dial gauge 0.01mm X 25mm travel.
              B) High sensitivity proving ring, Cap.5000 kg in a nice case. With our own calibration certificate Each.

              California Bearing Ratio Test (Hand Operated)

              California Bearing Ratio Test (Hand Operated)
              California Bearing Ratio Test (Hand Operated)

              Item Code: CBR-02

              W e are te manufacturer,supplier and exporter of California Bearing Ratio Apparatus (Hand Operated)

              IS : 2720 (Part –XVI) .

              Specifications: 

              The equipment consists one each of the following

              • Load frame, Hand operated, capacity 5000kg. with high and low rates of travel of the lead screw.

              • Mould made from Gun metal/Brass, 150mm internal dia x 175mm high, with perforated base plate and extension coller 50mm high.

              • Perforated plate made of Gue matal/Brass 148mm dia with adjustable stem and lock nut and a metal tripod for dial gauge.

              • Cutting collar.

              • Rammer 2.6kg weight with drop of 310mm.

              • Rammer 4.89kg with drop of 450mm

              Standard Compaction Test

              Standard Compaction Test
              Standard Compaction Test

              Item Code: SCT-01

              We are the Manafacturer, Supplier & Exporter of Standard Compaction Test.
              We are among the pioneers in the industry, offering Standard Compaction Test to our esteemed customers. The offered set comprises of compaction mould steel, compaction rammer, collar, and a base plate. All the parts have been manufactured using standard quality materials obtained from credible vendors and in compliance with the prevailing industry standard. We make standard compaction test available at market leading prices.

              Specifications:

              • Material: Steel
              • Size: 105mm I.D. x 115.5mm height x 1000 cc
              • Compaction Rammer: 2.5 kgs
              • Weight: 300m
              • Rammer: 50mm

              Universal Automatic Compactor

              Universal Automatic Compactor
              Universal Automatic Compactor

              Item Code: UAC-01

              We arre the manufacturer,supplier and exporter ofAutomatic Soil Compactor that is used in soil compaction which is a process in which a stress applied to a soil causes densification as air is displaced from the pores between the soil grains. Our Compactors assist in making the soil suitable for road construction. The heavy weight of the soil compactor reorients and compact the soil particles. These compactors are devised by making use of superior quality checked materials that makes possible these products durable and dependable.

              Features:

              • Strong construction
              • Dimensionally precise
              • Enhanced functionality.

                Proving Ring Tension and Compression Type

                Proving Ring Tension and Compression Type
                Proving Ring Tension and Compression Type

                Item Code: PR-02

                We are manufacturer,supplier and exporter of Proving Ring Tension and Compression Type:

                AVAILABLE FROM 200 KG TO 10000KG. CAPACITIES

                Tension Compression Proving Rings are having standard 1/2" (BSF Threads) and for measuring tension , 2 Nos. tension rods having male threads at both ends are supplied.
                For measuring loads in compression these tension rods are removed and the ring can be used in usual way.Works calibration charts for tension and with each ring . Supplied complete with tension rods in a carrying case.

                Note : We can also supply the following Proving Rings. 1. Tension cum compression proving ring upto 10,000kg capacity. 2. Double proving Rings.

                Consolidation Apparatus - Single Gang Model (Oedometer)

                Consolidation Apparatus - Single Gang Model (Oedometer)
                Consolidation Apparatus - Single Gang Model (Oedometer)

                Item Code: CA-01

                we are the manufacturer,supplier and exporter of Consolidation Apparatus - Single Gang Model:

                Detailing:

                • Lever ratio of 1:1 the whole assembly being mounted on a sturdy steel frame stand
                • Fixed ring type consolidometer (oedometer) cell assembly for testing 60 mm dia x 20 mm
                • Thick specimen comprising: fixed ring for specimens 60 mm dia x 20 mm thick with guide ring
                • Top and bottom porous stones for 60mm dia specimen
                • Perforated pressure pad, channeled base with water inlet and gasket flanged water jacket, water reservoir with plastic tube and pinch cock
                • Set of weights to give a pressure of 10kg/cm. Sq. On 60 mm dia specimen, comprising: 7 nos. 0. 05 kg/cm . Sq. , 5nos. 0. 1 kg/sq. Cm. , 6nos. 0. 5kg/sq. Cm. , and 5 nos. 1. 0 kg/sq. Cm. Supplied complete as above but without dial gauge
                • Dial gauge 0. 002 mm x 10 mm. Extension piece, 40 mm long, consolidation test forms pad of 50 for one dimensional consolidation
                • Loading unit, maximum capacity 20kg/cm. Sq.

                Optional extras :

                • Varying head stand pipe

                Consolidation Apparatus - Three Gang Model (Odeometer)

                Consolidation Apparatus - Three Gang Model (Odeometer)
                Consolidation Apparatus - Three Gang Model (Odeometer)

                Item Code: CA-02

                We are manufacturer, exporter & supplier of Consolidation Apparatus - Three Gang Model (Odeometer)

                Consist of 3 consolidation test assemblies mounted on a single frame. Complete wigh 3 sets of consolidometer cell assembly for 60 mm dia samples and three sets of weights each giving 10 kg/sq.cm. on each sample.

                Core Cutter

                Item Code: CC-01

                We are manufacturer,supplier and exporter of core cutter:
                Core cutter is used for determination of in situ dry density of natural or compacted fine grained soil, free from aggregates. A cylindrical cutter is used to extract a sample of the soil with the help of a dolley and rammer's. From the weight, density and the moisture, and dry density of the soil is readily calculated.

                Salient Features

                Specifications :

                It consists one each of : Cylindrical core cutter made of steel, 127.3 mm long and 100mm internal diameter. Steel Dolley, 25 mm high with a lip to enable it to be located on top of the core cutter. Rammer with detachable steel rod.

                Spare, Optional Extra and Accessories:

                  • Cylindrical core cu
                  • Cylindrical core cutter 100 mm I.D. x 175 mm long.
                  • tter 100 mm I.D. x 175 mm long.
                  • Dolley.
                  • Cylindrical core cutter 100 mm I.D. x 175 mm long.
                  • Test form pad of 50.

                    Dial Gauge

                    Item Code: DG-01

                    We are manufacturer,supplier and exporter of Dial Guage:

                    Dial Gauge Used for taking measuring settlement of soil, used as flow meter in Marshall stability test to measure deformities, strains, displacements in general.

                    Available Models: (a) 0.01 X 25mm (b) 0.002 X 5mm (c) 0.01 X 50mm

                    Direct Shear Apparatus (Hand Operated)

                    Direct Shear Apparatus (Hand Operated)
                    Direct Shear Apparatus (Hand Operated)

                    Item Code: DSA-01

                    We are manufacturer, exporter & supplier of Direct Sheer Apparatus.these products are extensively used in various applications. Owing to their robust construction, excellent performance and superior quality, these products are highly demanded by the customers.

                     

                    It consists of:

                     

                    • Loading Unit with V-strips where the shear box housing rests
                    • Loading yoke with direct and lever system in order to apply normal load to a capacity of 8 kg/cm2
                    • Fixtures for proving ring, brackets for holding consolidation and strain dial gauges and manually operated lead screw for application of shear stress
                    • Complicated counter balancing arrangement has been dispensed with and the unit is provided with pre calibrated load yoke
                    • Shear box assembly for square specimen size 60 x 60 x 25mm
                    • Two halves of shear box
                    • 2 Plain gripper plates
                    • 2 Perforated gripper plates
                    • 2 Porous stones
                    • Top loading pad


                    Available Models:

                     

                    • Hand Operated
                    • Motorized with single speed
                    • Motorized with 12 speeds

                    Direct Shear (Motorized Single Speed)

                    Direct Shear (Motorized Single Speed)
                    Direct Shear (Motorized Single Speed)

                    Item Code: DSA-02

                    We are manufacturing,supplier and exporetr of Direct Shear (motorized Single Speed):

                    Same as above but electrically operated to give a single constant rate of stain on 1.25 mm / min. Suitable for 230 V A.C. Weight 175 kg. approx.

                    Direct Shear Apparatus (Motorised Six Speed)

                    Direct Shear Apparatus (Motorised Six Speed)
                    Direct Shear Apparatus (Motorised Six Speed)

                    Item Code: DSA-03

                    We are manufacturer,supplier and exporter of Direct Sheer Apparatus.

                    These products are extensively used in various applications. Owing to their robust construction, excellent performance and superior quality, these products are highly demanded by the customers.

                     

                    It consists of:

                     

                    • Loading Unit with V-strips where the shear box housing rests
                    • Loading yoke with direct and lever system in order to apply normal load to a capacity of 8 kg/cm2
                    • Fixtures for proving ring, brackets for holding consolidation and strain dial gauges and manually operated lead screw for application of shear stress
                    • Complicated counter balancing arrangement has been dispensed with and the unit is provided with pre calibrated load yoke
                    • Shear box assembly for square specimen size 60 x 60 x 25mm
                    • Two halves of shear box
                    • 2 Plain gripper plates
                    • 2 Perforated gripper plates
                    • 2 Porous stones
                    • Top loading pad


                    Available Models:

                     

                    • Hand Operated
                    • Motorized with single speed
                    • Motorized with 12 speeds
                    But having 6 rates of strain 1.25, 0.25, 0.05, 0.01, 0.002 & 0.0004 mm/min. Works on 230 v a. C. Nett wt. 185 kg.

                    Direct Shear Apparatus (Motorized 12 Speeds)

                    Direct Shear Apparatus (Motorized 12 Speeds)
                    Direct Shear Apparatus (Motorized 12 Speeds)

                    Item Code: DSA-04

                    We are manufacturer,supplier and exporter of Direct Sheer Apparatus.these products are extensively used in various applications. Owing to their robust construction, excellent performance and superior quality, these products are highly demanded by the customers.

                     

                    It consists of:

                     

                    • Loading Unit with V-strips where the shear box housing rests
                    • Loading yoke with direct and lever system in order to apply normal load to a capacity of 8 kg/cm2
                    • Fixtures for proving ring, brackets for holding consolidation and strain dial gauges and manually operated lead screw for application of shear stress
                    • Complicated counter balancing arrangement has been dispensed with and the unit is provided with pre calibrated load yoke
                    • Shear box assembly for square specimen size 60 x 60 x 25mm
                    • Two halves of shear box
                    • 2 Plain gripper plates
                    • 2 Perforated gripper plates
                    • 2 Porous stones
                    • Top loading pad


                    Available Models:

                     

                    • Hand Operated
                    • Motorized with single speed
                    • Motorized with 12 speeds

                    Extractor Frame Hydraulic (Hand Operated)

                    Extractor Frame Hydraulic (Hand Operated)
                    Extractor Frame Hydraulic (Hand Operated)

                    Item Code: EF-01

                    We are manufacturer,supplier and exporter of Extractor Frame Hydraulic (Hand Operated)
                    This extractor frame is used for taking out soil samples compacted or undisturbed, from 100 mm dia and 150 mm dia cylinders such as Core Cutters, Proctor moulds, c. B. R. Moulds etc.
                    Salient Features


                      Specifications:


                      • It consists of a 5 Ton capacity hand operated, hydraulic jack mounted on a suitable frame. Two plungers, one for 100 mm dia and the other of 150 mm dia moulds are supplied. One thrust plate for 150 mm dia and one for 100 mm dia specimens are also supplied. Height of thrust plate is adjustable.

                      Accessories:

                      • Set of Plungers adaptors and thrust plates for 38 mm, 50 mm and 75 mm dia specimen.

                        Grain Size Analysis (Pipette Method)

                        Grain Size Analysis (Pipette Method)
                        Grain Size Analysis (Pipette Method)

                        Item Code: GSA-01

                        We are Manufacturer, Exporter & Supplier of Grain Size Analysis (Pipette Method). 
                        This is for the determination of their sub sieves particle distribution in a soil sample by mechanical analysis. An analysis of this kind expresses quantitatively the proportions by weight of the various size of particles present in the soil. It is recommended as a standard procedure to use dispersion agent to avoid flocculation. 
                        Specifications: The apparatus consists of a sliding panel which moves up and down by means of a screw allowing Anderson pipette fixed to it tube raised or lowered vertically. A sedimentation tube is held by a Laboratory clamp provided on the stand below the pipette. The depth of immersion is measured by a scale graduated in MM at the side of the sliding panel. Supplied complete with Anderson pipette 10ml. At eh side capacity made from glass, and a sedimentation tube also of glass of 500ml capacity and 50 Nos Test forms. Accessories & Spares:
                        1) Sedimentation pipette (Anderson pipette) 25ml., 
                        2) Sedimentation tube 1000ml., 
                        3) Sedimentation pipette 10ml., 
                        4) Sedimentation tube 500 ml., 
                        5) Test forms pad of 50.

                          High Speed Stirrer

                          Item Code: HSS-01

                          We are manyfacturer,supplier and exporter of High speed stirrer:
                          A mechanical stirring device in which a suitably mounted induction motor will have a vertical shaft having speed of 6000 to 8000 revolutions per minute when loaded. The shaft will be equipped with a replaceable stirring paddle of either of the types and made of metal. The surface will be of such length that the stirring paddle will operate not less than 20 mm and not more than 35 mm above the bottom of the dispersion cup. The dispersion cup will be supported on a rest and shall have a removable baffle. A special dispersion cup conforming to either of the designs shown in IS 2720 (Part IV) 1985 will be provided to hold the sample while it is dispersed. The stirrer will be free from vibration whilst operation and the base will be made of M.S. of at least size 20 cm X 25 cm with rubber cushions. The container and baffle will be of such material as not be affected by the reagents like sodium Carbonate, Sodium silicate , Sodium Hexametaphosphate etc. The stirrings device will be suitable for operation on 230-250 Volts A C with controller switch for different revolution. It will be provided with 3 core wiring of with off-on switch on side. The dimensions of stirring paddles for stirring apparatus and dispersion cup will be as per IS 2720(Part IV)1985.

                          Lateral Pressure Assembly

                          Lateral Pressure Assembly
                          Lateral Pressure Assembly

                          Item Code: LPA-02

                          We are manufacturer,supplier and exporter of Lateral Pressure Assembly:

                          Lateral Pressure Assembly is used in various soil testing industry for controlling pressure. It is manufactured by our vendors' experienced professional in compliance with international quality standard from premium grade material and contemporary machines. In order to ensure quality, this product is stringently tested on various parameters. Clients can avail this product in various specifications as per their requirements.
                          Features:

                          • User friendly
                          • Precisely engineered
                          • Dimensional accuracy

                          Liquid Limit Device

                          Item Code: LLD-01

                          We are manufacturer,supplier and exporter of Liquid Limit Device:
                          Meets the requirements of IS 2720 Part V and consists of a brass bowl held on an a rubber of standard hardness by can action. Rubber feet are provided to eliminate rocking while operating. Complete with one ASTM Grooving tool and height gauge. LIQUID LIMIT DEVICE With a counter same as above, but fitted with a counter to register the number of blows. LIQUID LIMIT DEVICE Motorized approximately. Same as above, but fitted with a motor geared down to give 120 rpm

                          Liquid Limit Device

                          Item Code: LLD-02

                          We are the manufacturer,supplier and exporter of Liquid Limit Device:

                          Our rise to recognition in this industry has been primarily triggered by the shooting popularity of our offered range of Liquid Limit Device. Our offered range serves an extended range of applications in various scientific labs. This range is manufactured using cutting-edge technology and quality-proven raw material. Moreover, we lay special emphasis on the overall quality of our offered range while the manufacturing is in process.

                          Features:

                           

                          • Precisely designed

                          • Long life

                          • Durability

                           

                          Specifications:

                           

                          • CIM-801 Plastic Limit Set - IS:2720 (Part-VII), ASTM-D-427, BS:1377, AASHO-190

                          • CIM-802 Shrinkage Limit Set - IS:2720 (Part-VII), ASTM-D-427, BS:1377, AASHO-92

                          • CIM-803 Cone Penetrometer - IS:2720 (Part-V)

                          • CIM-804 High Speed Stirrer - IS:2720 (Part-IV)

                          • CIM-805 Liquid Limit Device (Hand Operated / Motorized) With/Without Counter - IS:2720 (Part-V), IS:9259, BS:1377, AS:89

                          Liquid Limit Device (Motorized)

                          Liquid Limit Device (Motorized)
                          Liquid Limit Device (Motorized)

                          Item Code: LLD-03

                          We are manufacturer, exporter & supplier of Liquid Limit Device Motorized.

                          Same as above but fitted with a motor geared down to give approximately 120 r. P. M suitable for operation on 230Volts, single phase, 50 cycles, A. C. Supply.
                          Spares: Casagrande grooving tool. ASTM Grooving tool, Height block, 1cm high.

                          Load Frames

                          Item Code: LF-01

                          We are the manufacturer,supplier and exporter of Load Frames:

                          Load frames are used to apply load on the test specimen. The capacity and speed depends on the requirement of a particular test. Load frames are used in C.B.R. triaxial, unconfined compression test etc.

                          Bench Mounting Type Load Frame

                          Bench Mounting Type Load Frame
                          Bench Mounting Type Load Frame

                          Item Code: LF-03

                          We are manufacturer, exporter & supplier of  Bench Mounting Type Load Frame:

                          Specifications : This is a portable load frame which can easily be kept on Laboratory bench. Thus it is very convenient to the user to conduct tests. A motorized screw jack is fixed at the base to which are fixed two vertical pillars which can be easily dismantled.

                          A circular platen of 150mm diameter is fixed to the lead screw and loading and unloading is effected by upward/downward movement of the lead screw using a forward/reverse switch. The cross head is adjustable at any desired height and carries an adapter for Proving Ring. An adjustable dial gauge bracket is provided on one of the pillars . The rate of strain is constant 1.25mm/min. Operates on 230 Volts AC.

                          Load Frame Capacity Hand Operated

                          Load Frame Capacity Hand Operated
                          Load Frame Capacity Hand Operated

                          Item Code: LF-02

                          we are the manufacturer,supplier and exporter of Load Frame Capacity Hand Operated:

                          This is a light weight but sturdy load frame designed for application of penetration load in laboratory or field CBR tests on soils, and compressive loads in triaxial shear test. It is designed for a maximum load upto 5000 kg. And consists of a two speed screw jack mounted in a frame and with identical top and base channel pieces so that the unit can be placed either way up and the device can be used for loading from above or from below which ever is convenient.

                          Load Frame (Motorized) With 3 Speeds

                          Load Frame (Motorized) With 3 Speeds
                          Load Frame (Motorized) With 3 Speeds

                          Item Code: LF-04

                          We are the manufacturer,supplier and exporter of Load Frame (Motorized) With 3 Speeds:

                          We are offering Load Frame 5000 Kg - Motorized, With 3 Speeds.
                          Specifications : This is a portable load frame which can easily be kept on Laboratory bench. Thus it is very convenient to the user to conduct tests. A motorized screw jack is fixed at the base to which are fixed two vertical pillars which can be easily dismantled. A circular platen of 150mm diameter is fixed to the lead screw and loading and unloading is effected by upward/downward movement of the lead screw

                          Marsh Cone

                          Item Code: MC-01

                          We are the manufacturer,supplier and exporter of Marsh Cone;

                          Marsh cone is used to find out viscosity of Bentonite slurry and like material. The Marsh Cone is 6 inch in diameter at the top and 12 inch long, and tapers to join a tube 2 inch long and 3/16 inch inside dia. The capacity of the funnel is 1500 cc. Time in seconds required to flow out 1000 cc of slurry from cone is measured as funnel viscosity of the material.

                          Moisture Tins

                          Item Code: MT-01

                          we are the manufactuere,supplier and exporter of Moisture Tins:

                          To determine moisture contents in soil and other material. These are made from aluminium or stainless steel.

                          Sizes available are :

                          • 25 mm dia
                          • 50 mm dia
                          • 75 mm dia
                          • 80 mm dia
                          • 100 mm dia.

                          Universal or Combination Permeameter

                          Universal or Combination Permeameter
                          Universal or Combination Permeameter

                          Item Code: PR-03

                          We are manufacturer, exporter & supplier of Universal Or Combination Permeameter. 
                          Specifications: Same as above but instead of a set of three glass stand pipes a stand with nine glass tubes of 6mm, 10mm, 20mm, 25mm, 40mm, 50mm, 60mm, 70mm 75mm, 75mm bore. 75mm bore tube is provided with overflow arrangement for constant head tests. The remaining tubes are used for falling head test. 
                          Optional: Overhead tank made of steel, approximately 37. 5 cm dia. X 1 mtr. High. It is provided with an inlet port at the top and size outlet at bottom with cocks and air inlet and water filling tube on top. An arrangement is provided to indicate the water level. An extra metallic tube having approximately 5mm/6 I. D. And 1 mtr. Long is also supplied 2. 6kg X 310 MM controlled fall and Rammer 4. 89kg X 450 MM controlled fall. 
                          Spares: Pair of top and bottom Porous stones for peremameter mould.

                          Plastic Limit Set

                          Item Code: PLS-01

                          We are manufacturer, Supplier and exporeter of Plastic Limit Set:

                          Offering Plastic Limit Set.
                          Moisture contents at which soil has smallest plasticity is called limit. For determination purpose plastic limit is defined as the water content at which a soil will just begin to crumble when rolled into a thread of 3mm. dia.
                          Salient Features: Specifications :The complete set consists of one each:-
                          1.Glass plate 20 cm x 115 cm having ground ends and one side frosted.
                          2.Brass or stainless steel rod 3 mm dia x 150 mm long.
                          3.Flexible spatula.
                          4.Set of 6 moisture containers.
                          5.Porcelain basin 150 mm dia.
                          6.Plastic wash bottle 500ml.

                          Plate Bearing Test

                          Item Code: PBT-01

                          We are manufacturer,supplier,exporter of very high quality Plate Bearing Test Apparatus at very affordable market price. . These products are widely useful in determining the load carrying capacity in the field. These products undergo various quality checks at each level of its production to ensure superior quality and flawless performances.

                          Feature:

                          • Electrically operated
                          • Highly durable
                          • International quality
                          • Reasonable price

                           

                          Specifications:


                          • Bearing Plates: 25 mm thick of 75, 60, 45 and 30 cm dia Plain and Chequered
                          • Hydraulic Jack: 50/tonnes
                          • Capacity: 20 and 30 ton.Dial gauge .01 mm

                          Pocket Penetrometer

                          Item Code: PP-01

                          We are manufacturer,supplier,exporter of  Pocket Penetrometer:

                          This instrument is used to estimate approximate unconfined compressive strength and the estimation for shear strength of soil. Cohesive soils can also be classified in terms of consistency using this penetrometer. This is a handy and convenient instrument.

                            Specifications:

                            • It cosists of a light weight barrel assembly with a polished and ground steel loading piston plunger. A direct reading scale is engraved on the piston barrel and indicates load in kg./sq.cm. A maximum load indicator ring is provided on the penetration plunger. The calibrated spring is heat treated and plated for rust resistance. The barrel diameter is 20 mm and the length 150 mm. Supplied in storage box.

                            Point Load Index Tester

                            Point Load Index Tester
                            Point Load Index Tester

                            Item Code: PIT-01

                            We are manufacturer,supplier and exporter of point load index tester:

                            Used for testing rock, aggregate and core samples as well as out crop specimen in their original shape. Very useful for rock classification. This is a portable instrument and is useful in the field also. Uniaxial compressive strength for rock specimen can also be predicted approximately.
                            The instrument comprises of :- A three pillar type load frame on the base of which at the centre is fixed a 10 Tonne capacity hydraulic jack with a conical platen at the top of jack. The other conical platen is fixed to the top plate of the frame at its centre. A distance between two conical platen is fixed to the top plate of the frame at its centre. The distance between two conical platens is adjustable by vertical movement of the upper plate of the load frame. Loading jack wih integral hand operated pump and a pressure gauge 0-2500 kg x 25 kg.
                            Optional : Pressure gauge 0 - 10000 kg x 50 kg.

                            Tripod

                            Item Code: TR-01

                            We are the manufacturer,supplier and exporter of Tripod:

                            Tripod can be used in drilling operations to increase the footage and improve job safety.

                            Specifications :

                            Consists of three metal pipe legs approximately 5 meter long connected by a tie bolt. Each leg is made of two parts of ease of transport. Complete with one pulley. One leg has built in ladder.

                            Tripod Pulley

                            Item Code: TR-02

                            We are manufacturer,supplier and exporter of Tripod Pulley:

                            Tripod Pulley is use with above portable aluminum derrick. It attaches to the ball at the top of the derrick. "A" drill rods 1. 5 meter long with adaptor.

                            Pycnometer

                            Item Code: PY-01

                            We are manufacturer,supplier and exporter of pycnometer Specific Gravity is the ratio of the weight in air of a given volume of a material at a standard temperature to the weight in air of an equal volume of distilled water at the same stated temperature. The equipment mentioned below can be used to test a wide range of materials from clay to sand and gravel smaller than 10 mm.

                            Pore Pressure Apparatus

                            Pore Pressure Apparatus
                            Pore Pressure Apparatus

                            Item Code: PPA-01

                            Pore Pressure Apparatus

                            We are manufacturer, exporter & supplier of  Pore Pressure Apparatus offered by Index Engineering is used for measuring pore water pressure and pore air pressure in soils. These apparatus are designed in accordance with industry standards are well tested before dispatch.

                            This measuring apparatus consists of -

                            • Pressure gauge
                            • Mercury manometer
                            • Volume change burette
                            • Necessary connecting tubes and valves

                             

                            Specifications :

                             

                            • Burette : 50 ml Burette for measuring the volume change in the soil specimen
                            • Operated by mean of a hand wheel
                            • It is provided with a mercury trap
                            • Copper coil and water reservoir

                            Proctor Needles (Hydraulic Type)

                            Proctor Needles (Hydraulic Type)
                            Proctor Needles (Hydraulic Type)

                            Item Code: PN-03

                            We are manufacturer,Exporterand supplier of Proctor Needle:

                            Hydraulic Type Proctor Needle
                            is identical to spring type Proctor needle except the penetration pressure on the needle is conveyed through a hydraulic pressure gauge 0-70 kg x 1 kg. This system permits a greater control over the rate of penetration because of a better visibility of a load indication. It consists of a body of a bellow housing casing pipe, pressure gauge, Handles, 2 off. Small stem, graduated at 12.5 mm intervals to indicate the depth of penetration and to use needle in smaller areas. One needle point set comprising one each of 0.25, 0.5, 1, 1.5, 2, 3, and 5 sq. cm. Tommy pin. Complete as above in a wooden carrying case.


                             

                            Load Frame Capacity 5000 KGF.(Motorized)

                            Load Frame Capacity 5000 KGF.(Motorized)
                            Load Frame Capacity 5000 KGF.(Motorized)

                            Item Code: LF-05

                            We are manufacturer,supplier and exporter of Load Frame Capacity:
                            Specifications:

                            • The top bracket is adjustable in height and carries a hexagonal adapter for taking standard proving rings
                            • The instrument is fitted with a motor operation on 220/230 volts, single phase, 50 cycles A.C. supply
                            • This is for evaluating the strength of soil on field exploration or construction site and in the preliminary laboratory studies
                            • It gives directly the unconfined strength

                            Rapid Moisture Meter

                            Item Code: RMM-02

                            We are manufacturer, exporter & supplier of Rapid Moisture Meter as per the specifications of our clients. These are manufactured in accordance with the specifications of our clients and are in wide demand across the globe.

                            Specifications:


                            • Chemical 0-50% direct reading gauge complete in box.
                            • Speedy moisture meter that are used for determining the moisture content of materials in powder form i.e. soil, sand, coal, pottery slip, cement etc

                            Consists of:


                            • Pressure vessel with clamp for sealing cap
                            • Rubber sealing gasket
                            • Pressure gauze calibrated in percentage moisture content
                            • A counter poised balance for weighing sample
                            • A scoop for measuring carbide reagent
                            • A bottle for thorough mixing fitted in a wooden carrying case with handle

                            Rapid Moisture Meter 50 Percent

                            Rapid Moisture Meter 50 Percent
                            Rapid Moisture Meter 50 Percent

                            Item Code: RMM-03

                            We are manufacturer,supplier and exporter of rapid moisture meter 50%:

                            Specifications:


                            • Chemical 0-50% direct reading gauge complete in box.
                            • Speedy moisture meter that are used for determining the moisture content of materials in powder form i.e. soil, sand, coal, pottery slip, cement etc

                            Consists of:


                            • Pressure vessel with clamp for sealing cap
                            • Rubber sealing gasket
                            • Pressure gauze calibrated in percentage moisture content
                            • A counter poised balance for weighing sample
                            • A scoop for measuring carbide reagent
                            • A bottle for thorough mixing fitted in a wooden carrying case with handle

                            Screw Type Sampling Augers

                            Screw Type Sampling Augers
                            Screw Type Sampling Augers

                            Item Code: SA-03

                            We are the manufacturer,supplier and exporter of Screw Type Sampling Augers:

                            Sampling Augers Screw Type


                              • 25mm
                              • 38 mm
                              • 50 mm
                              • 75 mm
                              • 100 mm
                              • 150 mm
                              • 200 mm
                              • 250 mm
                              • 300 mm dia.

                                Salient Features
                                Extras : Extension rod 1 meter length with threadings at both ends and couplings. Set of two spanners and Tee piece.

                                Posthole Type Sampling Augers

                                Posthole Type Sampling Augers
                                Posthole Type Sampling Augers

                                Item Code: SA-02

                                We are the manufacturer,supplier and exporter of post hole Sampling Augers:
                                Augers are used to collect disturbed soil samples at reasonal depths for laboratory tests. Augers are available in two types and each in different sizes. Blade type (posthole type) and helical type (screw type). Each auger outfit consists one each of auger head, one meter long rod, tee piece and handle. Depth of excavating can be increased using additional extension rods.

                                VK-01 Auger Posthole Type :

                                (a) 50mm, (b) 75mm (c) 100mm dia (d) 150mm dia

                                VK-02 Auger Screw Type :

                                (a) 25mm, (b) 38mm, (c) 50mm, (d) 75mm, (e) 100mm, (f) 150mm, (g) 200mm, (h) 250mm, (i) 300mm dia,

                                EXTRAS :

                                Extension rod 1 meter length with threading at both ends and couplings, set of two spanners and tee piece.

                                   

                                  Gna Exports

                                  Mr. Amit Priyadarshi
                                  No. 94/3, 2nd Floor, Katriguppe, Near Big Bazaar, BSK 3rd Stage
                                  Bengaluru - 560085
                                  Karnataka, India
                                  © Gna Exports. All Rights Reserved (Terms of Use)
                                  Developed and Managed by IndiaMART InterMESH Limited