Helmets and Armours

We offer Roman Centurion helmets. This beautiful and wearable heavy gauge steel helmet with brass highlights and red horse hair crest.

Crafted of 18 gauge steel with reinforced sights and riveted and welded

We offer Roman officer helmets. This beautiful and wearable heavy gauge steel helmet with brass highlights and red horse hair crest.

Crafted of 18 gauge steel with reinforced sights and riveted and welded.

This is an authentic reproduction of the medieval helmets worn by the Hoplite - the warriors of Ancient Greece.
This helmet originated in Greece in the 7th Century B.C. and was later adopted by the Romans. It was a popular style all the way up to the 4th Century B.C. and was the basis for many Helmets of the Renaissance Period.

These medieval helmets were designed to be close-fitting. Shaped to the skull with only small openings left for the eyes, nostrils and mouth. This design allowed for maximum protection, visibility and air flow. And it must have been a terrifying sight to the enemy.

This helmet is made of hand-forged 16 gauge, low carbon, A-36 mild steel. This metallurgical composition provides excellent resilience, durability and will polish to high sheen.

This medieval helmet conforms to the Society for Creative Anachronism's regulations for thickness.

This item is shipped to you pre-oiled for protection.

Specifications:
Full size and wearable.
This helmet weighs over 6 pounds.
It is approximately 8 1/2 inches ear to ear.
The circumference is approximately 28 inches.
Due to the handmade nature of this item, no two examples are alike. It's truly a unique, collectible piece.

The classic Norman Helmet is based on the type worn as they conquered England and Sicily and during the Crusades.

It is made of hand-forged 18 gauge, low carbon, A-36 mild steel. This metallurgical composition provides excellent resilience, durability and will polish to high sheen.

 

Specifications:

• It is made of hand-forged 18 gauge, low carbon mild steel. Can be made in 14 gauge on request.
• It is approximately 11 inches ear to ear.
• It is full size and wearable, no liner is included so you can choose your own material.

 

Our chainmail extends a number of benefits to those who wear it. In addition to providing a high degree of protection, it's just great for SCA or LARP events; for going out to Renaissance Fairs or costume parties or just wearing it to the club or an evening destination to create your own style statement.

 

Chainmail Standard (Butted) : Made from high quality aluminum/ brass/ copper/ spring steel and mild steel, these armors are available in different finishes like natural/ galvanized iron/ gun blued iron/ aluminum anodized. These amours are available in various ring sizes like 6 mm/ 8 mm/ 9 mm/ 10 mm and are offered in different articles like Shirts/ Coifs/ Scarfs/ Mantles/ Bras/ Panties/ Skirts/ Trouser/ Gloves/ Legging/ Shoes/ Loose Rings and Patches. We can offer these Chainmail Standard (Butted) amours in all sizes & styles available. We also offer leather lining options with these amours.

Chainmail Flat Ring Round Rivet : Avail from us our range of Chainmail Flat Ring Round Rivets that come in the following sizes like 8 mm/ 9 mm/ 10 mm and are made from high quality iron. These products come in different types of finishes like natural/ galvanized iron/ gun blued iron. The different articles in which these amours are available are: Shirts/ Coifs/ Scarfs/ Mantles/ Bras/ Panties/ Skirts/ Trouser/ Gloves/ Legging/ Shoes/ Loose Rings/ Patches and many more.

Chainmail Flat Ring Wedge Rivet : We bring for our clients a wide array of Chainmail Flat Ring wedge Rivets that come in the sizes of 8 mm/ 9 mm/ 10 mm. Manufactured from high quality iron, these products come in the finishes like Natural/ Galvanized Iron and Gun Blued Iron. The different articles available with us are shirts, coifs, scarves, mantles, brass, panties, skirts, trousers, gloves, legging, shoes, loose rings, patches and many more.

Chainmail Riveted : Available in 6 mm, 8 mm, 9 mm and 10 mm, the different materials in which our Chainmail Riveted are available are aluminum, brass, copper and iron. These products come in various finishes like natural/ galvanized iron/ gun blued iron and aluminum anodized. The various articles available with us are shirts/ coifs/ scarfs/ mantles/ bras/ panties/ skirts/ trouser/ gloves/ legging/ shoes/ loose rings/ patches and many more.

We have been offering an exclusive range of Pickelhaube Helmet for quite a long time. Designed originally by King Frederick William IV in the year 1842.
The Pickelhaube Helmet is known for its artistic design. The early Russian pickelhaube helmet possess spike as a holder for a horse hair plume during full dress practice. The same tradition is still followed by some Prussian Models using.

We are offering Plate armour. Medieval Plate Armor was used by the ancient Greeks and Romans warriors in order to protect the chest and the lower limbs. The array of Plate Armor includes Armor Couter, Bevors, Bracers, Breastplates, Gorgets, Greaves, Greaves Leg Armor, Lorica Segmentatas, Muscle Cuirasses, Pauldrons, Spaulders and Steel Mitten Gauntlets.

 

• Bracer

• Steel Mitten Gauntlets

• Greave

• Bevor

• Breastplate

• Gorget

• Lorica Segmentata

• Pauldrons

We are offering the best quality medieval helmets. This helmet is made by brass with perfect finish.

The tall, pointed top of the Sugarloaf offered a much better glancing surface than the older flat-tops, allowing blows from sword, mace, or axe to be harmlessly deflected.
This medieval helmet was used from about 1275-1300 A.D. This is an authentic reproduction of the Sugarloaf Great Helm.

It is made of hand-forged 18 gauge, low carbon, A-36 mild steel. This metallurgical composition provides excellent resilience, durability and will polish to high sheen.

The accents are all real C-854 brass, not electro-plated. They also polish to a mirror finish.

This item is shipped to you pre-oiled for protection.

The pigface bascinet became popular during the late 13th century; widely replacing the Great Helm because of its close fit styling. Towards the late 14th century the long snouted appearance had earned it the English nickname Hounskull, or “Pig-faced Bascinet.” Hand-crafted from 18-gauge steel and featuring brass accents, this pigface bascinet can be worn or used as decoration. No lining or suspension is provided, this allows for individual customizing.

We feels proud to present a range of Medieval and Renaissance helms. We carry replica Medieval Helmets, which gives exactly the same look. Some of the Helmets are battle ready and can be used by SCA, Re-enactment and LARP groups, while others are for decorative use and make great home accents.

• Norman Nasal Helmet

• Gladiator Helmet

• Greek Corinthian Helmet

• Barbute Helmet

• Spanish Comb Morion Helmet

• Sugar Loaf Helmet

• Viking Spectacle Helmet

• German Military Helmet

• Trojan Helmet

• Leather Pickelhaube Helmet

• Miniature Medieval Helmets

• Roman Trooper Helmet

• Crusader Great Helmet

• Maximilian Helmet

• Pigface Bascinet Helmet

• Spangenhelm Helmet

• Roman Centurion Helmet

• Milanese Helmet

• German Pickelhaube Helmet

• Black Knight Helmet

• Gjermundbu Helmet

We are offering Fireman helmets. Constructed to perfection, we have for our clients a wide range of helmets that come in different small and big sizes to fit different individuals. These armour helmets come in various designs to suit the varied choices of the clients. Made of 18g iron/ brass sheet, these helmets are light in weight and comfortable to wear. We can also provide these helmets in 14/16 gauges depending upon the clients' requirements.

Nge is fully functional and equivalent to the historical counterparts. These Gladiator M

Offering gladiator helmets with spikes :

- Gladiator helmet with spikes are made of iron steel in polished and black finish. The same are available with and without leather inlet.

The exclusive range of Gladiator helmet offered by us is affordable reproduction of full size maximus gladiator knight. These are designed in such a manner that makes our range fully wearable for long time. Our raaximus can also be manufactured as per the specifications given by our valued clients

This is a replica of a type of helmet used by gladiators in the Roman Empire.

Specifications:

 *This Gladiator Helmet is constructed of sturdy 18 gauge mild carbon steel. Can be made in 16 gauge on request. •The design allows for maximum air flow.

*Made from high quality, elegant design, available in various sizes and thickness, highly durable, looks attractive, competitive price etc. 

* Raw material used: Made from the best grades of metals like carbon steel, stainless steel etc.

* Customization: Deliver customized products as per the clients requirement.