Civil Engineering Equipments

Made from cast iron conforming to the specifications and tolerance in accordance to I.S.-516 and I.S.10074.

Size: - 150 x 150 x 150mm.

Made from cast-iron conforming to the specifications and tolerance in accordance to I.S.-516 and I.S.-10076. Size:-150 x 300mm. high.

Conforming to the specifications and tolerance as per I.S.-516-1959 used for casting concrete specimen for flexural test. Made from cast iron. The moulds are made of 4 plates assembled together. Each mould is supplied completer with

Conforming to the specifications and tolerance in accordance to I.S.-2386 Part-IV. Sturdy construction consists of base support columns to form a rigid frame work around the quick release mechanism to ensure effective fall of the hammer during test. The free fall can be adjusted 380mm. The hammer is provided with locking arrangement. Supplied complete with one cylindrical cup and metal measure 75mm. dia x 50mm with tamping rod and with counter.

Conforming to the specifications and tolerance in accordance to I.S.-1199 and latest I.S.-7320.Consisting of a slump cone frustum in shape 10cms. Diam at top, 20cms at bottom and 30cm high fitted with foot piece and handle, one portable base plate having cleats to accommodate cone and tamping rod 16mm diam x 60cms. Long bullet at one end graduated 0-30cm in one millimeter division.

Conforming to the specifications and tolerance in accordance to I.S.-4031 used for proper vibration of 70.6mm mould suitable to work on 220/230 Volts, single phase A.C.Supply with endless belt and coiled springs.

Conforming to the specifications and tolerance in accordance to I.S.-1199 designed for the determination the flow of Portland Cement Concrete. The table top is 76.2cms diam finally machined from a solid casting, the integral cast ribs are also designed for support and strength. The stand is fabricated out of cast iron and is on sturdy construction. Holes for mounting on foundation are drilled in the base plate. The ground and polished steel cam is designed to drop 12.5mm. Manually operated. unit.

Conforming to the specifications and tolerance in accordance to I.S.-1199 used for the determination of the workability of the Concrete. The concrete is deform in a container and it vibrated after removing the cone on a small vibrating table operated at a fixed amplitude and frequency operation on 220 Volts, single phase.

used for the determination of the volume change of cement concrete. Consisting of a mould 75mm. x 75mm x 250mm effective gauge between inner most point, complete with length comparator  equipped with dial gauge least count 0.002mm. as shown in the image.

Conforming to the specifications and tolerance in accordance to I.S.-2386 Pt.-IV. Consisting of metal measures of 3 liter, 15 lit., and 30lit.

Conforming to the specifications and tolerance in accordance to I.S.-2386, Pt.-I, Constructed in thick M.S.Sheet with different slots as per specifications.

Conforming to the specifications and tolerance in accordance to I. S. -2386 PT. -I length gauge is mounted on a wooden post.

Suitable to carry 7 sieves of 200mm. diam. The shaker is driven by a 0.25 H.P. electric motor through a reduction gear. The sieve table does not rotate but it inclined from the vertical axis and the direction of inclination changes progressively in the clockwise direction. By removal of a stop pin fixed below the table, the shaker can have a rotary motion. In addition to the gyratory motion there is an upward and downward movement ensures that each square cm. of sieve is utilized. The whole gear assembly runs in an oil bath.

This is light weight but sturdy sieve shaker suitable for bench mounted. The side to side movement of the carrier which can take up to 7 sieves of 150mm 0r 200mm. diam is through a terrain of gears operated by a hand wheel. A heavy duty fly wheel ensures smooth operation.

Conforming to the specifications and tolerance in accordance to I.S.-460 for fine materials made out from 300mm diam G.I.Frame easily fit on each other equipped with square hole punch sheet aperture size:-125mm.,100mm.,90mm.,80mm.,75mm.,63mm.,52mm.,50mm.,45mm.,40mm.,

38.1mm.,37.5mm.,31.5mm.,26.5mm.,25mm.,22.4mm.,20mm.,19.0mm.,16.0mm.,

12.5mm.,10mm,9.5mm.,8mm.,6.3mm.,4.75mm with lid and cover.

Conforming to the specifications and tolerance in accordance to I.S.-2720 Part-V and latest I.S.-9259. Consists of a hard rubber base carrying a sliding carriage assembly to which a brass cup is hinged. The cup is raised and allowed to fall through a height of 1cm by the help of a lead screw provided at the back of the sliding carriage, fitted with blow counter to automatically register the number of blow.

Liquid Limit Test Apparatus Motorized – cum- Hand Operated

Conforming to the specifications and tolerance in accordance to I.S.-2720 Part-V and latest I.S.-9259. Consists of a hard rubber base carrying a sliding carriage assembly to which a brass cup is hinged. The cup is raised and allowed to fall through a height of 1cm by the help of a lead screw provided at the back of the sliding carriage, fitted with blow counter to automatically register the number of blow.

Used for the determination of liquid limit accordance to I.S.

-2720 Part-V. Consisting of a stand over which a bracket carrying s movable rod with arrangement to clamp the bracket and the movable rod at any desired position. A scale is fitted to indicate the depth of penetration. Supplied complete with one penetration cup, 50mm internal diam x 50mm. high.

Conforming to the specifications and tolerance in accordance to I.S.-2720 Pt-VII. Used for the determination of the water content level after which any further reduction in the water content will not cause a corresponding decrease in the volume of the soil mass Consisting of:-01.)Porcelain evaporating dish approx 12 cm. diam 02.)Shrinkage dish of monal metal 45mm. I.D.  X 15mm. high. 03.) Glass cup 50 – 55mm. diam x 25mm.deep. 04.) Perspex prong plate with three metal prongs. 05.) Perspex plate plain 75mm. square. 06.) Spatula 20mm. width and 80mm long made of stainless steel with wooden handle. 07.) Glass measuring cylinder 25ml. x 0.5ml. Graduation.

Conforming to the specifications and tolerance in accordance to I.S.-2720 consisting of following:- 01.) Glass Plate 20cms x 15cms with ground edge. 02.) Stainless steel spatula 2cms. Width and 8cms. Long with wooden handle. 03.) Brass rod 3mm. diam. 04.)Moisture tins 6 no . 05.) Measuring cylinder 25ml x 0.5ml.graduation.

For Testing Soil Specimen of 38mm diam. X 76mm. long Conforming to the specifications and tolerance in accordance to I.S.-2720 Part-XII. This is Stationary bush type suitable to accommodate soil specimen of 38mm. diam x 76mm long, in perpex chamber, suitable to withstand fluid pressure of 10kg/cm.sq. With no volume change type clinger valve base.

Conforming to the specifications and tolerance in accordance to I.S.-2720 Pt.-VI and latest I.S.-10074 for light compaction consists of proctor mould 100mm, diam x 127.3mm high having 1000cc volume, complete with color and base plate. Rammer 2.6kgs x 310mm controlled drop through guide.

Laboratory Model capacity 2.5 cft mounted on rubber tires and sturdy frame with towing rod electrically operated.

Conforming to the specifications and tolerance in accordance to I.S.-2720 Part XXVIII consisting of Small sand pouring cylinder 3 Liters capacity mounted above a pouring cone and separated as a shutter hole. Cylindrical calibrating container internal diam 100mm and internal depth 150mm fitted with a flendge 5 cms. Wide. Metal tray 30cms square and 4 cm. deep with a 10cms. Hole in the centre.